Question about 2006 Nissan Maxima

Open Question

Where is the fuse for the windshield wipers on the 2006 maxima

Posted by on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 85 Answers

SOURCE: 1995 xj6 windshield wiper do not work

you can buy a fuse probe for under $5 and probe all the fuses one by one (it is a small plastic box with two prongs and an 'led' light that glows when the fuse is good). some fuse packs include a fuse probe at no extra charge. some vehicles work on circuit breakers which are small black boxes. listen to the fuse panel while turning the windscreen wipers on or off to see if you can hear a clicking from the circuit breaker. the circuit breaker protects the fuse. good luck

Posted on Nov 13, 2008

  • 2 Answers

SOURCE: 2006 Tucson - windshield wipers not working

check wiper motor and its connections. Fuse box not labeled very well check each fuse

Posted on Dec 17, 2008

  • 548 Answers

SOURCE: 2006 kia sorento windshield wiper hang up

When you put the wipers on, you positioned them incorrectly so now they go where they shouldn't.
To fix this you need to first make note of which one goes over the other and keep them that way.

Next, put a piece of tape on the windshield where you think they normally go and use that as your target when reinstalling them. Your tape target will probably be 6 -8 inches above the base of the windshield. The wipers should be almost level when at rest.

You'll have to position them with the wiper motor off and in the 'park' position, which means that you turn them on, then turn them off (not with the key) and let them go down to the bottom of the windshield. At that point, you can begin repositioning them.

Good luck!

Posted on Dec 27, 2008

  • 7 Answers

SOURCE: windshield wiper fuse blows everytime I turn the ignition on

YOU MIGHT HAVE A SORT TO GROUND.A WIRE MIGHT BE LOOSE AND TOUCHING SOMETHING ELSE I WOULD HAVE A PRO TAKE CARE OF THIS PROBLEM

Posted on Apr 07, 2009

Molson02536
  • 3854 Answers

SOURCE: 2006 kia wipper works but stops in the middle of the windshield

It sounds like the the circuit board has gone bad and does not know where the base is any more so it will stop at the middle or the windshield. Auto Zone should have a new board if it's replaceable like the GM products. Good luck and hope this helps, In the mean time you can always turn your wipers on and pull the fuse out when it's at the down position so it's not up.

Posted on Jul 11, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I find out if the wipers on my 2006 H3 Hummeris on a relay?


The Wiper/Washer System consists of the following components:
• Windshield wiper/washer switch
• Body control module (BCM)
• Wiper micro relay
• Wiper 2 relay
• Wiper diode
• Windshield wiper motor
• Windshield washer pump
• Windshield washer nozzles
• Windshield washer solvent container
• Windshield wiper arm and blade assemblies
• Windshield wiper transmission
• WIP/WASH 10A fuse
• WIPER 25A fuse

Wiper/Washer System Description
The body control module (BCM) controls wiper motor low speed operation. The washer pump and high speed operation are controlled directly by the wiper/washer switch. The windshield wiper/washer switch supplies voltage on the signal circuits to the BCM for windshield wiper/washer operation. When WASH, MIST, DELAY, LOW, or HIGH is detected, the BCM energizes the wiper micro relay by suppling voltage to the relay coil. This allows battery voltage from the WIPER fuse to flow through the relay switched input then through the contacts and out the relay switched output to the wiper 2 relay switch contacts. Since the wiper 2 relay switch contacts are normally closed to the low speed circuit of the windshield wiper motor, the motor will operate at low speed.

Low Speed Operation
When the wiper switch is in the Low position, voltage is supplied through an internal resistor to the signal circuit. The body control module (BCM) monitors the windshield wiper switch signal 1 circuit, and energizes the wiper micro relay which will operate the windshield wiper motor. The wiper motor will operate at low speed, since the wiper 2 relay is de-energized. Low speed can also be commanded with a scan tool, by commanding Wiper Relay Cmd. ON and OFF. Refer to Scan Tool Output Controls .
High Speed Operation
In the High position, the windshield wiper/washer switch supplies voltage to both the wiper micro relay and wiper 2 relay coils. This energizes both relays and allows battery voltage from the wiper micro relay switched output to the switched input of the wiper 2 relay through its contacts and out the switched output of the wiper 2 relay to the high speed circuit of the windshield wiper motor. The windshield wiper motor will operate at high speed. During high speed wiper motor operation the wiper switch signal circuit is at the low speed signal voltage, and the body control module (BCM) supplies redundant voltage to the wiper relay via the wiper diode.

This info is out of hummer factory service manual !

Dec 10, 2016 | 2006 Hummer H3

1 Answer

Where is the fuse that control a 2006 vw windshield wiper?


I just googled 2006 vw windshield wiper fuse and got a lot of diagrams for a lot of different vw's. What model is it if you need more help I will try to help ya.

Apr 20, 2015 | Volkswagen Cars & Trucks

1 Answer

Where is the fuse for the windshield wipers on 2004 Nissan maxima


Some cars have these included with accessories. If your other accessories work, then your windshield wiper motor requires replacement. Otherwise, read the inside cover of the fuse box the symbol for windshield wipers looks like a windscreen with two wiper blades on it.

Feb 23, 2015 | 2004 Nissan Maxima

1 Answer

What fuse works the windshield washer pump on a 2006 mustang


No they use the same fuse. The pump motors do go out. they are easy to change

Jan 04, 2012 | 2006 Ford Mustang

1 Answer

Windshield wipers went out on my 2000 nissan maxima


Im not sure the extent of the problem but if both went out, check your fuses, they may be under the hood or in the fuse panel within the car. Also you might want to check if the nuts that hold the wiper arms on arnt loose, if they are the rod that holds the wiper arm will move but with out the nut holding tight the arms themselves wont move.

Nov 28, 2011 | 2000 Nissan Maxima

1 Answer

Windshield wipers do not work. Car sat one day. Worked fine previously. 2004 Nissan Maxima. Had about 3" snow. No ice on car. Temp around 32 or 33 degrees. Brushed snow from car. Came off...


when you turn the wipers on do you hear any sound? If so, then you may have disconnected a ball joint in there behind the firewall - typically the top (black) panel (under the wipers/ at the back of the hood) comes off or you could find other access to inspect more thoroughly to be sure. If no sound, test the power to the wiper motor with a test light, if no power, check fuses, wiring, ground, etc.,
Best regards
Ck

Mar 06, 2011 | 2004 Nissan Maxima

3 Answers

Snow on windows and wife turned on wipers and they didn't come on 20006 maxima ..


wipers dont do very well in ice and snow after the snow and ice was cleared did they work again if not check fuse if fuse is good
First: is it the wipers, wiper arms or motor that is at fault? Most times it is the ball joint piece that comes off, disabling the wipers, and the motor is still good. This reauires replacement of the wiper arm mechanism that has the "socket" on the end, a plastic part. If it is the motor, read on... The motor is located on the passenger side, mounted on the firewall. It "connects" to the arms that move the wipers via a ball joint. The wiper arm has a plastic part that has to be "popped" off the ball of the motor to be able to remove the motor. It simply snaps back on. You facillitate this by removeing the black plastic air vent screen that runs across the engine are near the window. After removing this you will see the arms that control wiper movement. It helps to "undo" the ball/socket if the motor is loose also. Install is just the reverse.


Dec 29, 2010 | 2006 Nissan Maxima

1 Answer

Replace the windshield wiper fuse


Locate fuse panel usually located in glove compartment or in drivers knee area.Once you have located your fuse panel see lid or panel it's self usually marked and numbered you will see wipers be sure when you remove this wiper fuse replace it with the amp type.

Dec 26, 2010 | 2000 Nissan Maxima

1 Answer

2006 kia wipper works but stops in the middle of the windshield


It sounds like the the circuit board has gone bad and does not know where the base is any more so it will stop at the middle or the windshield. Auto Zone should have a new board if it's replaceable like the GM products. Good luck and hope this helps, In the mean time you can always turn your wipers on and pull the fuse out when it's at the down position so it's not up.

Jul 11, 2009 | 2006 Kia Amanti

Not finding what you are looking for?
2006 Nissan Maxima Logo

Related Topics:

127 people viewed this question

Ask a Question

Usually answered in minutes!

Top Nissan Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Phil Lovisek
Phil Lovisek

Level 3 Expert

726 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Are you a Nissan Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...