Question about 1998 Chrysler Town & Country

1 Answer

Have a 1998 chry. town and country lowbean and fog lights stop working, i have change the dash light switch, and checked the relays under the hood what could it be? thanks

Posted by on

  • mtd93 Dec 30, 2010

    thanks but i have changed the relay i did relize the fog lights only work when the lights are on dim. lol. but still have no low beam

×

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Chrysler Master
  • 8,555 Answers

Hi, the relay or body control module is indicated. Have you replaced the low beam relay?

have a 1998 chry. town and country lowbean and fog - jturcotte_668.gif

Posted on Dec 30, 2010

  • Jeffrey Turcotte
    Jeffrey Turcotte Dec 30, 2010

    OK, are you saying the fog lights work but not the low beams?

×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I just replaced the headlight switch in the dash of a 2004 town and country van, the fog lights come on but the headlights will not come on, in the auto or lights on position


You have to know how the system works before replacing parts . The headlamp switch is a low voltage input to the BCM - body control module ,The BCM along with other modules on the vehicle all share info , send commands on what is call a serial data communication network . ( it cuts down on the amount of wiring need on the vehicle ) When you turn on the headlamps a low voltage signal is sent to the BCM ,with the software programmed into it , it sends a message to the TIPM - totally integrated power module , which is part of the under hood fuse / relay box . The TPIM then turns on the headlamps . Go to http://bbbind.com/free_tsb.html for free wiring diagram an check it out . http://bbbind.com/free_tsb.html

Feb 17, 2016 | 2004 Chrysler Town and Country

1 Answer

2000 Town and Country. Blower motor, turn signals and power seats quit. all at once. cant figure out where to check.


the culprit is fuse f12 -a 10 amp fuse on the right end of the small fuse panel by below the hood release under the dash. I had same problem - something is blowing the fuse; in my case it was something in the backup light circuit. This fuse is the power source for the relay coils that power all the other circuits that stopped working.

Feb 05, 2012 | 2000 Chrysler Town & Country

1 Answer

02 Town and Country Heat Controls


In the black fuse box under the hood by the battery check all fuses and use a spare relay to check the relays The fuses I would look at first are#19,20,and 24 if not it could be your BCM

Dec 12, 2011 | 2002 Chrysler Town & Country

1 Answer

Don't no were to find my buick regal gs 98 fog light fuse my fog lights stopped working and I'm getting no power the the fog light button it worked yesterday n now it won't turn on after I replaced my fog...


the fuse for the fogs is in the fusebox in the passanger side door panel. the relay is located under the hood in the fuse box directly behind the battery its relay number 17 if im not mistaken hope I could help

Sep 20, 2010 | 1998 Buick Regal

2 Answers

No fire to plugs


check to see if the crank sensor is good, if you havent replaced it already

Feb 08, 2010 | 1998 Chrysler Town & Country

1 Answer

My dome lights just quit working. all of them, all at once. Also lost factory fog lights at the same time.


Your dome light and fog lights may be integrated to the same fuse, check the fuses at your kick panel for any open circuits (blown fuses). Also make sure no fuses are blown under the hood.

Dec 04, 2009 | 2000 Chrysler Town & Country

1 Answer

I have a 2002 town & Country and think the BCM is bad


Check all fuses under dash & under hood in fuse/relay box first.

Jun 24, 2009 | 1999 Chrysler Town & Country

1 Answer

Transmission wont switch gears and nothing in dash cluster works


this could be a relay or body control module as all things are controled electricaly in your van relays are under hood near front of engine ---did you check fuses first? relays next --even trans is controled electricaly

Jun 12, 2009 | 1999 Dodge Grand Caravan

Not finding what you are looking for?
1998 Chrysler Town & Country Logo

277 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chrysler Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8548 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...