Question about 2006 Isuzu i-280

1 Answer

I need to know how to remove the door panels of my 2006 Isuzu I-280 pickup to replace the speakers.

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 18 Answers

Hey I don't mean to condemn your car, but what you have is a GM vehicle not a real Isuzu. The real Isuzu was a lot more easier to work with and much more pleasant to drive in my opinion. Anyway, there are a few screws holding the armrest and the door handle plastic flange that needs to be removed first. Then you can pop off the door panel, which is just snap fitted. You might have to look hard for the screws and even use a flat screwdriver pop off the small plastic pieces hiding the screw heads. Make sure you don't try to pop off the panel before removing the screws as this will irrepairably damage the panel.

Posted on Dec 30, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to replace a starter on isuzu 2006 truck I 280?


like all are.
1: battery neg lug removed. (or boom eat acid)
2: wires off starter.
3: bolts off starter
4: falls out.
reverse to put back. torqued to spec.

Oct 27, 2015 | Isuzu Cars & Trucks

1 Answer

Need to replace front wheel bearing on my 06 I-280. Is it just a bearing or do I have to replace the whole wheel hub?


Should be hub bearing all new cars have it.remove big nut 32 or 34 mm,deep socket .

Feb 04, 2013 | 2006 Isuzu i-280

1 Answer

I need to know how to reset the computer on a isuzu i280.


go to your local parts store,. they will have an OB-II reader where you could reset the computer.
Ck

Feb 13, 2011 | 2006 Isuzu i-280

1 Answer

How do I reset the oil change warning for 2006 Isuzu I-280?


drive for about 50 miles and it should reset the obdII

Feb 22, 2010 | 2006 Isuzu i-280

2 Answers

2006 I-280. Battery died, replaced the battery


I'll try to help. It sounds like the drivers window motor or drivers window control shorted and killed the battery. If you want to fix it yourself you should take off the negative battery cable before taking off the drivers' door panel.

Then look at the backside of the drivers' window control switch and see if anything is melted. It could have melted the lock button too!

Some vehicles have an electronic menu in the dash or information center. This is where the optionable controls for "honking locks" and "flashing security lights" is programmed. You might have to reset the controls.

If you do not have these fancier features check your fuse panel for burn outs. If you do not want to do it yourself go to a glass shop or dealer.

Aug 09, 2009 | 2006 Isuzu i-280

1 Answer

Recall Isuzu i-280


2006 ISUZU I-280 EXTERIOR LIGHTING:BRAKE LIGHTS:SWITCH Recall Date: 04/27/2006 Summary: CERTAIN PICKUP TRUCKS MAY EXPERIENCE THE PERMANENT LOSS OF BRAKE LAMP FUNCTION OR BRAKE LAMPS THAT ARE ILLUMINATED AT ALL TIMES. THE CENTER HIGH-MOUNTED STOP LAMP (CHMSL) IS AFFECTED IN BOTH INSTANCES. ALSO, IF EQUIPPED, THE CRUISE CONTROL WILL BECOME INOPERATIVE. ANY TRAILER BRAKE LAMPS WHICH ARE CONNECTED TO THE VEHICLE'S BRAKE LAMP WIRING WILL MIMIC THE VEHICLE'S BRAKE LAMPS WHEN EITHER CONDITION OCCURS. Consequence: A FOLLOWING DRIVER MAY NOT KNOW WHEN THE BRAKES HAVE BEEN APPLIED, AND A REAR-END CRASH COULD OCCUR WITHOUT PRIOR WARNING. Remedy: DEALERS WILL REPLACE THE BRAKE LAMP SWITCH ASSEMBLY. THE RECALL BEGAN ON DECEMBER 5, 2006. OWNERS MAY CONTACT CHEVROLET AT 1-800-630-2438; GMC AT 1-866-996-9463 OR ISUZU AT 1-800-255-6727. Potential Units Affected: 404733 Notes: ISUZU I-280 06030

May 18, 2008 | 2006 Isuzu i-280

Not finding what you are looking for?
2006 Isuzu i-280 Logo

186 people viewed this question

Ask a Question

Usually answered in minutes!

Top Isuzu Experts

yadayada
yadayada

Level 3 Expert

76848 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

14384 Answers

Are you an Isuzu Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...