Question about 1996 Jeep Grand Cherokee
Well you are going to have to get underneath it and either release the locked up adjustment slider parts or unbolt the whole thing from the car. In any event I would pull it out, disassemble and clean the adjuster parts coat them with chain lube and reassemble. if it is a power seat then your best bet is to remove it and toss it; then go find a compatible manual jeep seat in a junk yard and bolt it down into the same mounting holes.
Posted on Dec 30, 2010
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
Tips for a great answer:
Oct 31, 2014 | 1996 Jeep Grand Cherokee
Unlock all of the Jeep Grand Cherokee's doors and open the driver's side door. Keeping the door open, lock it using the manual lock on the door itself.
Put the manual key into the ignition and switch it to the "On" or "Run" position, whichever applicable, without starting the engine.
Point the remote at the receiver (located by the little bulb on the car ceiling) and hold down the "Lock" button for up to 5 seconds.
When the driver's side door unlocks, you know the remote has been programmed correctly. If you are only programming one remote, jump to the next step. If not, manually re-lock the driver's side door and repeat steps 5 and 6 using each remote you would like to program and then continue.
Turn the key to the "Off" position and turn the ignition on immediately. This must be done within 20 seconds of programming the last remote. You're finished!
Feb 11, 2013 | 1996 Jeep Grand Cherokee
Aug 29, 2011 | 1996 Jeep Grand Cherokee
Aug 17, 2011 | 2001 Jeep Grand Cherokee
Jun 24, 2011 | 1996 Jeep Grand Cherokee
May 04, 2011 | 1996 Jeep Grand Cherokee
May 03, 2011 | 1996 Jeep Grand Cherokee
Jan 25, 2010 | 1996 Jeep Grand Cherokee
Dec 29, 2009 | 1996 Jeep Grand Cherokee
Feb 19, 2009 | 1996 Jeep Grand Cherokee
307 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: