Question about Toyota Corolla

Open Question

How do i fix the driver's side window? It won't roll up anymore.

Posted by on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 176 Answers

SOURCE: drivers window wont roll up

Unless you've been inside the doors and made repairs like this before..you're better off to take the car to a authorized garage....believe me on this one..the money you spend will be well worth the hair pulling you're gonna do trying to do it yourself.

Posted on Dec 31, 2008

chuck943
  • 783 Answers

SOURCE: My driver side window does not auto roll up

Window may not be initialized. Follow this proceedure

Window Motor Initialization adobe.gif Printable View (96 KB) NOTICE: Make sure no obstructions are present in the window system when carrying out this procedure.
NOTE: A battery disconnect does not require this procedure to be carried out unless the battery was disconnected while the window was operating.
NOTE: Excessive bounce-back (bounce-back that occurs with no obstructions present) may indicate a non-initialized window motor.
NOTE: Carry-out the de-initialization of the motor before initializing the motor.
NOTE: The motor will only operate in the 9-16 volt range. If the voltage drops below 9 volts, the window will not function correctly or may stop moving. If the voltage drops below 9 volts while the motor is operating, the motor will become de-initialized and will need to be initialized.
NOTE: The front window motors must be initialized whenever: a new window regulator and motor is installed, a new window glass is installed, a glass top run removal and installation or when carrying out any operation in which grease or lubricants are applied to the window system. A new front window motor is in a proportional up/down mode until initialized.
NOTE: The convertible rear window motors do NOT need to be initialized as they do not have one-touch up or one-touch down functions.
NOTE: All front window components (window glass, window regulator, window motor and glass top run) must be installed/tightened and adjusted to specification before carrying out this procedure.
NOTE: If this procedure is only partially completed, the front window motor remains non-initialized and only the proportional up/down functions operate. A non-initialized window motor may allow one-touch down operation, but does NOT allow one-touch up operation.
De-initialization

  1. The motor can be de-initialized in 2 ways:
    • Disconnect the battery cable from the battery while the window is operating.
    • Remove the window motor fuse while the window is operating.
  1. After the motor has been de-initialized, the initialization procedure must be carried out.
Initialization
NOTICE: Make sure there are no obstructions present in the window system when carrying out this procedure.
NOTE: The door MUST be closed during this procedure (for convertibles, the top and quarter glass must be in the closed and up position), in order for the door window motor to initialize.
NOTE: The windows must be in the full open position for this procedure to operate correctly.
  1. Press and hold the window control switch in the UP position at the second detent until the window glass stalls into the glass top run for at least 2 seconds.
  1. Once the top run is reached, hold the window control switch in the DOWN position at the second detent until the window glass stalls at the bottom of its travel for at least 2 seconds.
  1. Cycle the window glass an additional 5 times to set the window soft stop for the down position.
  1. Test for correct window operation by carrying one-touch up feature.

Posted on Mar 06, 2009

  • 1 Answer

SOURCE: my drivers side window will go down but not up

it is probably the motor in the window

Posted on May 14, 2009

webbird69
  • 6 Answers

SOURCE: drivers side window won't go up but will roll down

sounds like bad window regulator. could also be window switch,or broken wire between door and body

Posted on Jun 11, 2009

  • 1 Answer

SOURCE: Divers window won't roll up my Camry

You can also put a volt meter on your switch. Power the switch on and off to see if you get a difference in resistance. if you do it is probably the motor

Posted on Aug 06, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Mazda 6 passenger window won't go up!!!


It sounds like it could be the window solenoid, or the window motor. It's unlikely the switches on both doors are bad. Check the solenoids and motors...

Oct 16, 2012 | Mazda Cars & Trucks

1 Answer

1996 Ford Explorer driver's window won't roll up


if it was running slow then yes i would say the motor died. to replace you have to take the door panel off not too hard of a job if you have some mechanical abilties. i would look online for the part you can usually get it a lot cheaper than local auto stores

Jul 31, 2012 | Ford Cars & Trucks

3 Answers

The driver side window button does not roll the window up or down, but the other windows work fine. Could the problem be in the button or the motor?


Its the window switch. I stopped getting "clicking" action on my driver side/driver window button, so I switched it with one from a back window (meaning I couldnt roll down the back one from the driver side control anymore. This was temporary. I went to the junk yard and of 12 98/99 devilles, all of them had the switch pulled already. It is a pretty common problem I guess. New aftermarket cost around $80. All you need is a screwdriver to get at it, plug in the new one and you are fine.

Aug 20, 2010 | 1999 Cadillac DeVille

3 Answers

04 Beetle Driver's side window sensor issue (maybe?)


Not likely. You have a defective window regulator. To fix remove the door panel. Peel down the warer barier. Remove the window motor and check it. If the plastic plugs are defective replace. To remove the window regulator you will need a 1/4 inch punch to punch out the rivits and 1/4 inch drill to drill out the aluminum holding in the regulator. Replace these with 1/4 inch bolts and lock nuts.

Sep 11, 2009 | 2004 Volkswagen Beetle

1 Answer

There is no power to window switch is ok but won;nt roll down driver side or passanger side need to no how to get driver side window down antil i get fixed


Remove the door panel, and use two jumper wires to the window motor. One wire goes to a good, non-painted surface on the metal body of the van, for a good ground. The other wire goes to a 12 volt source. Touch the two wires of the window motor with the two jumper wires.

Tries to go up? Switch the jumper wires around, and try again.

Aug 10, 2009 | 1993 Ford Aerostar Extended

1 Answer

My windows will not roll down anymore by my keys


My driver side window will not roll down anymore.

Jul 15, 2009 | 1999 Volkswagen Beetle

1 Answer

Window will not roll up


Their is a separate motor for each window. The least expensive fix is to replace the entire track assembly and motor. This is not a big job if you have done it before but it could be if you are not mechanical.

Apr 16, 2009 | 2000 Oldsmobile Alero

1 Answer

Possible window fuse blown?


if the fuse is blown none of the windows will work,it sound wierd but all the power to the window motors runs through the drivers side switch. the drivers side switch may be your culprit.to be sure check to see if you have power goin in to the other switches before you replace the drivers side switch.

Jul 31, 2008 | 2002 Toyota Sequoia

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

26 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

75797 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8140 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...