Question about 2005 Dodge Ram

1 Answer

Getting no brake fluid to the rear brakes - 2005 Dodge Ram

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Renaissance:

    An user who is expert in 3 categories / brands.

  • Dodge Master
  • 1,949 Answers

Check for rubber hoses/then check for poportioning vavle in line to the back may have to push black button with something hard like handle of screw driver while someone pushes brake padel

Posted on Dec 30, 2010

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 58 Answers

SOURCE: rear brake problems in 1990 lincoln mark 7

my first guess at that would be you have a air bubble it the master cylinder. have you left something out like a repair you just performed or something ?

sound like air anyhow or a bad master cylinder.

what to try is this fill up the brake reservoir and open both rear bleeders

walk away for a few hours or put a pan to catch fluid and go to bed

this should start a gravity bleed on the brakes brake, fluid level should be lower in the morning if not empty lol.

have someone pump the brakes hold the pedal down on the last pump and while they hold the pedal down crack the bleeder, ( he must keep pedal on the floor till you tighten the bleeder back up

then he can let up on the pedal and y'all do this again and again till while he hold the pedal down and you open the bleeder, you have no momre air coming out. good luck

Posted on Jan 27, 2009

moparownr
  • 667 Answers

SOURCE: no brake fluid flow to right rear brake

neither have I, but no it is not repairable you would just have to replace it.

Posted on Mar 27, 2009

baccardo
  • 150 Answers

SOURCE: leaking brake fluid from the rear tires.

remove the rear tires and the brake drums and check and see if the wheel cylinders are leaking

Posted on Apr 23, 2009

66 chrgr
  • 1011 Answers

SOURCE: no brake fluid flow to right rear brake

the stratus is know for clasped rear brake hoses .This stops the flow off brake fluid. try opening the brake lines at the master cylinder that go to the rear.pump up brakes first! if you got fluid than check the brake line if this is rear disc brakes on the line at the rear will be a built in proportioning valve.if drum loosen rubber hose line before the rubber part to see if you have fluid. If you do replace the brake hose! On you 74 challenger by the way i love dodge! any way on the valve there is a small button on the front of the proportioning valve that pops out it needs to be tap in lightly. also hit the brake peddel kind of hard a couple off times if that doesn't work. thanks for your question


p.s that hex bar on the is a junction not a proportioning valve .

Posted on Apr 29, 2009

VREGG
  • 41 Answers

SOURCE: reason for rear brake lock up

CHECK PROPORTIONAL VALVE NEXT TO MASTER CYLINDER,I HAVE SEEN THEM BLOCK FLUID GOING TO REAR BRAKES.

Posted on May 10, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

What is the most problem for the master brake not apply brake fluid to rear wheel?


Air in the brake lines. Brake fluid can not be compressed. If air is in the brake lines the air will compress not allowing the rear brakes to apply.

Check your owners manual for the type of brake fluid required, (DOT 3, DOT 4 OR silicone based DOT 5 brake fluid) remove the bap from the brake master cylinder. You will feed another person to pump up the brakes then depress the brake pedal while you get under the car and loosen the wheel cylinder for drum brakes or caliper bleed screw allowing the brake fluid and air to escape your braking system plumbing. Repeat this until brake fluid without air comes out the bleeder screws. Be sure to add brake fluid so the master cylinder does not go dry.

The brake bleeders resemble a grease zerk fitting.

Hopefully this will get your brakes operating normally.

Jul 25, 2014 | BMW X5 Series Cars & Trucks

1 Answer

1990 Reatta. Replaced all calipers and hoses. Cannot get fluid to rear brakes. Porportioning valve is OK. No fluid coming to it. Is there a way to cycle the master cylinder valves to cycle fluid...


I would try replaceing the master clylender and rebleed the brakes start at the right rear have some one help you press the brake paddle down and hold it open bleeder its where the brake line connects to the brakes looks like a greese fitting open the bleeder then close it let brake paddle back up repeat until you have fluid comeing out of bleeder go to the left rear do the same then right front to left front

Aug 23, 2011 | 1990 Buick Reatta

1 Answer

Brake fluid pressure


You are getting plenty of fluid to both rear wheels when you bleed it? Rear brakes drum or disc?

Apr 14, 2010 | 1999 Ford Taurus

1 Answer

I have bleed rear breaks.I cant seem to get fluid to rear.The ABS light is on along with the break light.Is it possible that there is a faulty ABS sensor not allowing fluid to be distributed to the rear...


I'm confused, how did U bleed the rear brakes and there's no fluid to them? first of all U need to get fluid to the rear.

  1. Make sure there fluid in the brake reserve
  2. leave the cap off the reserve
  3. crack open the furthest bleeder valve till fluid come out (take it off if U have 2)
  4. if nothing still come out, then U have a clogged brake line
  5. blow back through the line from the brake side (slow till it bubbles back through the reserve
  6. then gravity bleed it, tighten up the the valve
  7. now U can bleed the brakes

May 04, 2009 | Pontiac Grand Am Cars & Trucks

1 Answer

No brake fluid flow to right rear brake


the stratus is know for clasped rear brake hoses .This stops the flow off brake fluid. try opening the brake lines at the master cylinder that go to the rear.pump up brakes first! if you got fluid than check the brake line if this is rear disc brakes on the line at the rear will be a built in proportioning valve.if drum loosen rubber hose line before the rubber part to see if you have fluid. If you do replace the brake hose! On you 74 challenger by the way i love dodge! any way on the valve there is a small button on the front of the proportioning valve that pops out it needs to be tap in lightly. also hit the brake peddel kind of hard a couple off times if that doesn't work. thanks for your question


p.s that hex bar on the is a junction not a proportioning valve .

Apr 29, 2009 | 2001 Dodge Stratus

3 Answers

Rear wheel mazda 323 m reg


Sounds like you have a leak in the brake system. The fluid you are seeing is brake fluid.

You need to get this fixed asap.

Apr 05, 2009 | 1991 Mazda 323

2 Answers

When brake is applied,the rear light on the panel come on.


You might wanna have your rear brakes checked along with the rear brake calipers or cylinders, as well as the rear drums or discs, depending on weather your car has rear drum brakes or rear discs brakes. Some cars come equipped with brake sensors that let you know when theres a problem. It would also be a good idea to check you brake fluid level.

Mar 12, 2009 | 1990 Toyota Camry

1 Answer

Brake fluid leaking alot and now noticed fluid from rear tires


if your car has rear drum then the wheel cylinders could be leaking and in need of replacement. If it has rear disc brakes then it could be leaking fluid where the brake hose goes into the caliper or the brake hose my be worn or have a hole in it. Or it could be a a brake line. You should have it checked because you don't want air getting into the braking system.

Mar 01, 2009 | 1989 Toyota Corolla 2 Door

2 Answers

Bleeding abs brakes


Try using a pressure bleeder. It will force the air out. Works every time.

Nov 08, 2008 | 2001 Ford Mustang

2 Answers

Brake light displays


Look at the master cylinder fluid level. If it is low, the red brake lamp will come on. Note that as the front brake pads wear, the brake fluid level will drop proportionally. If the fluid level is indeed low, you may need front brake pads, Unless you have a lot of miles on it, I doubt that you will need rear brake shoes. Also, if the fluid is low, don't add any. When you DO have to replace the pads, the additional fluid will be forced out of the cylinder and get all over your engine compartment under the master cylinder area . Brake fluid will eat the paint. Check the brake pads, replace them if the pad material is worn.

Sep 15, 2008 | 2007 Toyota Yaris

Not finding what you are looking for?
2005 Dodge Ram Logo

Related Topics:

185 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

75005 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7710 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...