Question about 2001 Hyundai Sonata

1 Answer

Hard to start in morning, also noisey sound when clutch is ingaged.

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Hyundai Master
  • 6,826 Answers

Check whether the battery should be replaced due to being older than 3 years old which is the average lifespan of car batteries.

The noise you hear may be due to a worn out throw out bearing in the clutch. Change it when the clutch is serviced.

Good luck on these repairs.

Posted on Dec 30, 2010

Testimonial: "thanks, that was very helpful."

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Whats happened when clutch has jus gone all lose an theres no tightness there anymore hyuandi 98 excel


You start with the master & slave cylinder,
any cables,etc & hopefully the transaxle doesn't
have to come out

Mar 09, 2013 | Hyundai Excel Cars & Trucks

1 Answer

Air conditionor was noisey then turn on engine would stop ,now it will not do anything even if set on max air cond. where is fuse?


It is possible you are low on freon, if so the clutch will not ingage, It is also possible that the Clutch on the compresser went out., If this happens it would break the belt because the clutch wont turn....good luck

Mar 12, 2011 | 2003 Nissan Altima

1 Answer

Standard shift, v6, 3.2, and can't ingage shifter into gear. Replaced slave cylinder and master cylinder. Bleed unit, after starting it looses pressure on clutch pedal not allowing gear to ingage. With...


Sounds like you may have air trapped in the system.Try this trick.Remove the bleeder screw from the slave cylinder.Place your finger over the hole to act as a one way valve, allowing air and fluid to escape but not allowing air to get sucked back in.Then have someone stroke the pedal slowly making full strokes, keep an eye onn the resevoir so that it does not get low and fill the system with more air.If there is room turn a bottle of brake fluid upsidedown in the resevoir to keep it from running dry.After you have run a bottle of fluid through it replace the bleeder and pump and bleed the old fashioned way a few times.If there is air it should be gone.If clutch will still not disengage the something is wrong with clutch plate and or pressure plate.Good luck!

Mar 02, 2011 | 1992 Isuzu Trooper

1 Answer

Put car in reverse after car warms and it doesnt ingage until you push on the gas. It stays in the nuetral position


hi sound like the clutch is worn and your having to use the speed of the engine to help you ingage the gear.Does the clutch slip at all when driving in a forward gear ?

Sep 02, 2010 | 1993 Saturn SC2

1 Answer

Hard spots in power steering 2004 f-150


Hard to turn steering at times......Not making noisey sound. How can you tell if fluid is down or bad.....?

May 15, 2010 | 2004 Ford F150

1 Answer

My hyundai elantra 2004 model when ingaging clutch to start car get no responce.. all lights are working when turning on


There is a safety switch that is at the top of the clutch pedal, it sounds like it may be bad. It is really a pain to replace , you may want to take it to a mechanic to have it replaced.

Jan 15, 2010 | 2004 Hyundai Elantra

1 Answer

I have a 98 saturn sl that feels like it goes in gear but will not move its like its not ingaging no chattering or any other sound when i dont push the clutch in while its started it goes in every gear not...


sounds like the hub on the inside of the clutch disk broke free from the clutch material, thats the first place i would look seeing as how you run into it on the way down to the trans.

Nov 21, 2009 | 1998 Saturn SL

2 Answers

I have a 2003 ford mustang gt stick shift. clutch sliping


sounds like you have a worn or misadjusted clutch, but if your clutch is self adjusting meaning a operated with hydraulic pressure (Brake Fluid) then you could have leaking slave cylinder that maybe wetting the clutch disc with brake fluid causing a slippage, or just a worn clutch, in which case you will need to inspect inside bellhousing...

Sep 11, 2009 | 2003 Ford Mustang

1 Answer

1979 ford f350 clutch pedal travel 1/2 inch


sounds like the clutch armerature may be hanging or broke. it's the rod that ingages the clutch.

Nov 09, 2008 | 1979 Ford F 350

2 Answers

Noisey Clutch accelarating in 1st and 2nd gear


Sounds like its not sticking to the flywheel instantly but skippng a little bit and the squeek could be the clutch plate springs groaning.If the clutch and flywheel have been used hard it could have a heat glaze on it that resists grip Probably need to get flywheel machined when you eventualy change the clutch.

Oct 13, 2008 | 2000 Volkswagen Golf

Not finding what you are looking for?
2001 Hyundai Sonata Logo

Related Topics:

108 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hyundai Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8567 Answers

Are you a Hyundai Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...