Question about 1999 Suzuki Grand Vitara

1 Answer

My jimny is a 98 model with the 1.3 litre sohc efi. (g13bb)? timming has been checked, valve clearances checked. no power down low

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Suzuki Master
  • 1,348 Answers

You could have a bad throttle position sensor,or air flow meter.Sometimes debris gets in the air flow meter,located on the air intake tube before the throttle body,and either blocks part of the screen,or damages the tiny sensors inside.if the sensors are not aligned dead straight,the sensor will not work properly to meter the air/fuel mixture.

Posted on Dec 30, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Need valve lash specs for 1980 suzuki dr400


Suzuki DR400S - Motorcycle Specs

www.motorcyclespecs.co.za/model/suzu/suzuki_dr400s%2080.ht
1980. Engine. Air cooled, four stroke, single cylinder, SOHC, 2 valves per cylinder ....Valve adjustment can be done without a feeler gauge and the CDI has ..

Dr400 valve adjustment 1 - YouTube

? 2:08
www.youtube.com/watch?v=BH-KFrpwo3w
Nov 19, 2010 - Uploaded by obtrailriders
Dr400 valve adjustment 1. ... Suzuki DRZ 400 Valves clearance check \ sprawdzanie luzu zaworowego PART 2 ...

Nov 01, 2015 | Suzuki Cars & Trucks

1 Answer

How to fix my Suzuki seiarra blowing black smoke


no year. no joy, huh? !!!!!!!! Carb or EFI?????
sierra ?
The series from SJ410 to SJ413 was known as the Sierra in Australia, and remained the Jimny in some markets.
we dont have Sierra here in uSA, on our USA forum.
so no books on that. car here. as a consequence of those facts.

so will answer in generic form.
1: its too rich.
cause by, vast things. ill list a few
  • carb bad.
  • EFI running rich (scan it yet?)
  • fuel pressure too high.
  • map sensor bad, (EFI)
  • misfiring like mad. (is it?)
  • injectors stuck on or leaking, (EFI)
  • Carb float level too high or valve there stuck open.

end short list.

Mar 03, 2015 | Suzuki Cars & Trucks

1 Answer

Head bolt torque of susuki jimny 2001


we (USA forum) do not have Jimny cars. here.
so what engine, we can never guess your engine
we can look under your hood, so...
you need 2 things
staged torques
and order.
per wiki there are these engines used on GEN3

658 cc K6A I3 (JB23)
1,298 cc G13BB I4 (JB33)
1,328 cc M13A I4 (JB43)
1,461 cc K9K TD I4 (JB53)

we have not a clue.

google your engine real name with head torque and win.

Mar 01, 2015 | 2006 Suzuki Jimny 1.3

1 Answer

Where is the crank angle sensor on a G13BB suzuki jiminy 1999 model


Sorry I don't have that information on file but the sensor is usually fairly easy to spot.

Possible positions are adjacent to the front crankshaft pulley (rarely), screwed low down in the cylinder block or crankcase or most commonly positioned to receive a signal from the flywheel. While sometimes mounted in a slot in the flywheel housing to receive from the periphery of the flywheel they are more often to be found on the part of the cylinder block or adapter plate that can be described as the front face of the flywheel housing.

There are geographical variations and a couple of engines fitted to the Jimny and not all engines are fitted with a crank sensor.
The front position is favourite if your engine has one.

Good luck!

Feb 09, 2015 | Suzuki Cars & Trucks

1 Answer

Engine runs rough and gets worse when accellerating


PROBLEM TROUBLE AREA
Rough idle, stalls or
hesitate on acceleration :
.Spark plug faulty
. High-tension cords faulty
Ignition problems:
• Ignition coil
• Igniter
• Distributor
. Incorrect ignition timing
Vacuum leaks:
. PCV valve and line.. .
. EGR line..
. Intake manifold.
• Throttle body
• ISC valve
• Brake booster line

• Throttle body
• Brake booster line
. Incorrect idle speed
. Reset timing
. Adjust valve clearance
. Check fuel system . Check air cleaner
. Incorrect valve clearance
. EFI system problems
. Low compression


Dec 12, 2013 | 1989 Toyota Camry

3 Answers

Engine light is on, flashes when driving above 100 Km


stop by local parts store (Autozone,Advance, etc) and have them do a free fault code test. They can print out a list of faults and clear the codes

Jan 02, 2011 | 1998 Ford Explorer

1 Answer

2001 vw 1.8 litre gas awv engine spec I am rebuilding my 2001 new beetle engine after the head cracked and I need the engine torque specs. Thanks


Bore × stroke 81.00 mm × 86.40 mm 3.19 in × 3.4 in Cylinders s-4 SOHC Single overhead camshaft DOHC Double overhead camshaft OHV Overhead valves TS Two stroke SV Side valves
  • Sl
  • Sleeve valves
  • oise
  • Overhead inlet side exhaust
  • 5 valves per cylinder
    20 valves in total
    compression ratio
    9.30:1 fuel system
    MPFi Maximum power 150.1 PS (148.0 bhp) (110.4 kW)
    @ 5700 rpm Specific output 83.1 bhp/litre
    1.36 bhp/cu in Maximum torque 210.0 Nm (155 ft·lb) (21.4 kgm)
    @ 1750 rpm bmep 1481.7 kPa (214.9 psi) Specific torque 117.91 Nm/litre

    May 01, 2010 | 2001 Volkswagen Beetle

    1 Answer

    1992 sidekick jx 1.6 liter eng sohc idels low at times lacks power when pushing on gas pedal and stalls when stopping


    Try adjusting the idle speed to specification. Try also to check for leaks in your intake manifold. Check also the valve clearance. If all checks are alright, have somebody look into your emission system components.

    Jul 11, 2009 | 1992 Suzuki Sidekick

    1 Answer

    Valve timing check


    Chain drive. Unless the engine's been apart, why would the cam/valve timing change?
    Valve clearances are another matter, and unless you want to remove the camshafts, get a mechanic who has the proper Suzuki tool to do them for you. You can measure the clearances, but the shims are between the cam lobe and the valve bucket, and the special tool holds the bucket down whilst changing to a thicker or thinner shim.

    Apr 15, 2009 | Suzuki Aerio Cars & Trucks

    1 Answer

    Transmission code


    Here is the TSB from Ford:


    Here it is... TSB 03-22-10...

    FORD: 1995-2001 EXPLORER
    1995-2002 RANGER
    1996-1997 AEROSTAR
    2000-2002 EXPLORER SPORT
    2001-2002 EXPLORER SPORT TRAC
    MERCURY: 1997-2001 MOUNTAINEER


    This article supersedes TSB's 03-11-9, 02-13-8 and 02-08-2 to update the model coverage.

    ISSUE:
    Some vehicles built prior to 12/1/2001 may exhibit the following shift and engagement conditions:

    No 2nd Gear
    No 3rd Gear
    No Engine Braking In Manual 1st.
    Out of specification pressures controlled by the transmission main control valve body separator plate may be the cause.

    ACTION:
    Verify the condition, the main control valve body separator plate may need to be updated to the latest level. Refer to the following Service Procedure for details.

    SERVICE PROCEDURE

    CAUTION: A NEW SEPARATOR 7Z490 MUST BE USED WHEN INSTALLING THE SPECIAL SERVICE KIT 7M203 OR ADDITIONAL TRANSMISSION DAMAGE MAY OCCUR. REFER TO THE PARTS APPLICATION CHART IN THIS ARTICLE FOR CORRECT SEPARATOR PLATE PART LISTING.



    NOTE: THIS ARTICLE DOES NOT APPLY TO ANY OTHER CONDITIONS OR COMPONENTS THAT MAY CAUSE SIMILAR SYMPTOMS AND IS ONLY WRITTEN TO COVER THESE SPECIFIC CONDITIONS.



    NOTE: AN IN-LINE SERVICE FILTER IS NOT REQUIRED TO BE ADDED OR REPLACED FOR THIS TSB.



    Verify that one or more of the following conditions exist.
    Low Line Pressure While In Drive At WOT
    No 2nd And/Or No 3rd Gear
    No Engine Braking In Manual 1st
    DTC P0732, P0733 Or P1762
    Install Kit (3L5Z-7M203-JA) to update the main control valve body assembly, refer to the installation procedures found in the kit.
    Reinstall the main control by continuing to follow the installation steps listed in the Workshop Manual, in-vehicle service, main control valve body.
    After completing the procedure, verify the condition has been corrected.
    Clear all DTCs.

    Part Application Chart
    Vehicle Application Engineering Description Qty. New Service Part Use on Transmission Application 7000 -Reference Only-
    95/96 Models ONLY
    95/97 Models Separator Plate to Case Gasket 1 2L5Z-7C155-AA ALL
    95/97 Models Separator Plate to Main Control Gasket 1 2L5Z-7D100-BA ALL
    95/96 Models - ALL Plate - Valve Body Separator 1 F5TZ-7A008-CA 95GT-AA/BA/CA/DA/EA/FA/ GA;96GT-BA/CADB/EB/FA/ GA/HA/KA/MA/NA
    97 Models ONLY
    97 2.3L Ranger Plate - Valve Body Separator 1 F77Z-7A008-AB 97GT-GC
    97 3.0L OHV Ranger/Aerostar Plate - Valve Body Separator 1 F77Z-7A008-AB 97GT-EC/FC/MC/NC/RE/SE
    97 4.0L OHV Ranger/Aerostar Plate - Valve Body Separator 1 F77Z-7A008-CB 97GT-KE/LE
    97 4.0L OHV Explorer/Mountaineer Plate - Valve Body Separator 1 F77Z-7A008-DB 97GT-KF/LF
    97 4.0L SOHC Explorer/Mountaineer Plate - Valve Body Separator 1 F77Z-7A008-EB 97GT-AE/BE
    1998-2001 Models ONLY
    98/01 2.5L Ranger Plate - Valve Body Separator 1 1L5Z-7Z490-DA 98GT-GA; XL5P-CA
    98/00 3.0L Ranger Plate - Valve Body Separator 1 1L5Z-7Z490-EA 98GT-EB/FB; XL5P-AA/BA
    98/00 4.0L - EI Ranger Plate - Valve Body Separator 1 1L5Z-7Z490-FA 98GT-KB/LB; XL5P-DA/EA/FA
    98/00 4.0L - EI Explorer Plate - Valve Body Separator 1 1L5Z-7Z490-GA 98GT-CB/DB; XL2P- EA/FA
    98/00 4.0L - SOHC Plate - Valve Body Separator 1 1L5Z-7Z490-HA 98GT-AA/BA; XL2P- CA/DA
    2001-2002 Models ONLY
    2001/2002 2.3L Ranger Plate - Valve Body Separator 1 1L5Z-7Z490-AA 1L5P-CA
    2001/2002 3.0L Ranger Plate - Valve Body Separator 1 1L5Z-7Z490-BA 1L5P-AA/BA
    2001/2002 4.0L-SOHC - ALL Plate - Valve Body Separator 1 1L5Z-7Z490-CA 1L5P-DA/EA
    ALL MODELS
    1995-2002 ALL as Listed Above Valve Body Service Kit 1 3L5Z-7M203-JA ALL

    May 27, 2008 | 1998 Ford Explorer

    Not finding what you are looking for?
    1999 Suzuki Grand Vitara Logo

    241 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Suzuki Experts

    yadayada
    yadayada

    Level 3 Expert

    77202 Answers

    Colin Stickland
    Colin Stickland

    Level 3 Expert

    22265 Answers

    Boyet Soriano
    Boyet Soriano

    Level 2 Expert

    293 Answers

    Are you a Suzuki Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...