Question about 2004 Hyundai Santa Fe

1 Answer

I need to get shop manual detail for replacing the front drive axels on a 2004 hyundai

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Hyundai Master
  • 1,348 Answers

Get a reprint from the service department at hyundai for a few bucks.The material is copyrighted.A Haynes manual is not a bad investment either for 30 bucks,as it covers the whole vehicle in great detail.It is also copyrighted.

Posted on Dec 30, 2010

  • nhchet Dec 30, 2010

    Thank the service dept is a good idea, I just need some front end specs.

    nhchet

×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get 2 Free calls (no credit card required) and instant help on almost anything you can think of (from cars to computers, appliances, handyman, and even pets).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do i fix cv axels on a 2002 hyundai accent


It's not worth it to fix the axel, it is wise to replace the axels
by jacking up the car secure the car with jack stands, then remove the wheels, the big center nut of the axel and the lower bolts on the ball joint, then pry the lower control arm down and pull the hubb aside. Now u could remove the axel easily, if stuck take a hammer and tap it lightly, remove it, replace with the new but make sure both ends r lubed with grease.

Feb 21, 2015 | Hyundai Accent Cars & Trucks

1 Answer

Loud noise from front axel as i drive


sounds like the cv joints have gone bad on axle, get underneath and grab the axle and see if it wiggles or moves. if its a howling noise, its a wheel bearing!

Apr 07, 2014 | 2004 Oldsmobile Alero

2 Answers

I have broken lugs on my 2004 Hyundia Santa Fe. I am trying to pull the front left hub off using a puller (3 jaw). The puller is pushing the axel back. I called the local dealer. The Mechanic said I...


You should be able to hammer out the wheel studs
if you have clearance
You shouldn't have to pull the entire bearing assy

Look on YOU TUBE there are all kinds
of videos of hub replacements

You remove the axle nut & 3 or 4 bolts
holding the bearing assy,that is all
The axle stays in place
There is no puller involved

Mar 10, 2011 | Hyundai Santa Fe Cars & Trucks

1 Answer

Tools needed for replacing 2001 Hyundai Tiburon CV joints.


CV joints are not hard if you do some research. Get a shop manual first. You will need a good jack, two jack stands. I am not that fam. with the Hyundai, but some fwd cars have med/ large bearing retaining bolts so you will need 1/2 drive socket set up to say 33 mm. You will need a whole day or 2 to do this. set aside that much time in case of some road block. You have to pull both wheels and fender wells. On some cars you will have to pull the struts or the lower arms that hold them to the body to give room to pull out the cv assy. Do one at the time on some fwd's if you pull both the ring gears can fall out of sync and thats not good. Buy the complete cv axel rebuilt if you can. Work slow, take pictures as you go, be careful.

Jul 03, 2009 | Hyundai Motor 1998 Sonata

1 Answer

Need to replace front left cv axel


Best approach is to acquire a repair manual for that vehicle. Pep Boys or similar will likely have one..

Apr 28, 2009 | 2004 Kia Optima

1 Answer

Wheel bearing & drive axel replacement


lift the car support on jack stands remove the wheels remove the brake systems remove the wheel hub locking nut and then remove the strut (this must be compressed or it will hurt you)
remove the axles then when that is complete you need to have the wheel bearings knocked out of the brake hub or removed from the strut assembly and then a new pair reseated, or bolted on then you can assemble in reverse, if you are not mechanically inclined I would recommend a mechanic to do this.

Apr 03, 2009 | 2000 Hyundai Sonata

2 Answers

Clicking noise from front hubs 2004 dodge ram 2500 diesel 4x4


First just crawl under it and grab your axles and see if you can shake them and get any movement from either of them this will tell you if you have a loose CV joint or not .. thanks Jerry holler if you need more .

Jan 30, 2009 | 2004 Dodge Ram

Not finding what you are looking for?
2004 Hyundai Santa Fe Logo

Related Topics:

164 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hyundai Experts

yadayada
yadayada

Level 3 Expert

76649 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8518 Answers

Are you a Hyundai Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...