Question about 2007 Hyundai Azera Limited Sedan

Open Question

Kill switch/immobilizer is activated, need 2 find out how 2 reset...

Posted by on

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

1997 crown Victoria. viper alarm kill switch has turned all power to car. How do I reset


there is no override. Otherwise it would defeat the point of an immobilizer. I would find out why the alarm went off and deal with the rot cause rather than trying to bypass something made to be un-bypassable.

You may be able to reset the alarm by unplugging the battery from the car for a minute or 2 but I would start with the alarm manual to be safe. Possibly even remote the alarm and put the wiring back to stock.

Oct 16, 2016 | 1997 Ford Crown Victoria

Tip

How to activate empty button in Volvo dome light


You can easily activate empty button in your Volvos dome light and use it with garage door opener, aftermarket immobilizer or any other gadget.

Enabling is easy. All you need is flat screwdriver, nail file, sharp blade and reset button switch from old computer case.

on Aug 18, 2015 | Volvo Cars & Trucks

1 Answer

Interior light killed battery, re charged now car wont start


flat battery probably activated the immobilizer
try using a scan tool to reset the ECM/immobilizer

Feb 18, 2016 | 1999 Chrysler 300M

1 Answer

Hi can you please tell me. I have a mersedes c220 cdi 2003. after I take the battery out put on charge reinstall the battery only hazadlight flashing not work. I been tolk the immobilizer been disable


removing he battery activates the immobiliser and corrupts the CPU program . try resetting the system using a scanner that reads fault codes.

Dec 24, 2014 | Cars & Trucks

1 Answer

Kill switch on a 2004 kia sorento


Why do you need to access it? If the ECU seemed to stop activating the fuel pump and ignition, check the immobilizer first.

Apr 22, 2014 | 2004 Kia Sorento

1 Answer

Kill switch on a kia 2004 sorento


There is no kill switch on this car. Do you mean the immobilizer? There are many different immo-systems and you need to be sure of which one before you order keys or try to fix.

Apr 22, 2014 | 2004 Kia Sorento

2 Answers

Immobilizer active reset on 2006 volkswagon passat


First of all you need to programm all ignition keys using suitable diagnostic equipment (VAS, VAG-Com) connected to the data link connector of the car.

You have an electronic immobilizer key recognition problem. Now your key chip is not recognized by the transponder antenna fitted on the ignition switch barrel.

tdisline_775.jpg


This warning lamp indicates that the engine is locked by the immobilizer system, and the engine start sequence must be repeat again.

From year 1995 in Audi-VW (VAG) cars is used engine immobilizer. The VAG group immobilizer system consists of an immobilizer ECU which controls the recognition of keys and the Engine Management ECU system. Immobilizer is activated when the ignition key is removed and, together with the engine control unit, largely prevents unauthorized starting of the engine. The system uses a transmitter and receiver unit in the ignition key (transponder). Whenever an attempt is made to start the engine, it transmits a new code to the car's electronics. The immobilizing is only cancelled and car motor electronic receives permission to start engine if the key sends a right authorization code.

tdisline_776.jpg

Oct 12, 2011 | 2006 Volkswagen Passat

1 Answer

STARTS BUT SHUTS OFF IN SECONDS? LOST THE IGNITION KEY AND BROKE THE STEERING LOCK TO START THE ENGINE. 1999 CHEVY BLAZER.


When the ignition switch is turned on, the immobilizer control module sends a challenge signal through the antenna around the ignition switch to the transponder chip in the ignition key. The transponder key responds with an encrypted key code. The immobilizer module then decodes the key code and compares it to the list of registered keys. When the engine is started, the ECM sends a request to the immobilizer module over the data bus to verify the key is correct. If an attempt is made to start the vehicle with an invalid ignition key, the immobilizer module sends a message over the data bus to the instrument cluster to flash the anti-theft indicator lamp. If the ECM does not receive a "valid key" message from the immobilizer module within 2 seconds of engine start up, the ECM will disable the fuel injectors to kill the engine. You'll need to get a new key and get it registered in the immobilizer control module. You'll need a scan tool, the VIN number, the date manufactured and a factory-assigned PIN number.

Nov 18, 2010 | 1999 Chevrolet Blazer

2 Answers

Immobilizer


If there is a blinking car icon with an "X" over it. This icon means the Immobilizer has been activated and hence won't allow the car to start. It could be due to a bad SCU, Start Control Unit. The SCU is actually the ignition switch on these cars.
Most of the time it's triggered by the anti-theft system..You can try this trick i learned that the dealers won't tell you...try locking and unlocking of the doors five times with the remote to reset the immobilizer and see if this helps.
Good luck..i hope this helps...please take a minute to rate me a fixya.

May 11, 2009 | 2000 Volvo S40

1 Answer

1996 audi a4 ignition kill switch wont recognise car keys


HI,MARK,THE SIGNAL FROM YOUR KEY IS NOT GETTING TO YOUR IMMOBILIZER.THE PROBLEM IS MORE LIKELY AT THE PLUG ON THE READER COIL ON THE IGNITION.YOU WILL HAVE TO BEND THOSE TERMINALS SLIGHTLY CLOSED AND INSULATE THE WIRES SEPERATELY.THIS FEATURE IS PART OF THE VEHICLES SYSTEM UNFORTUNATELY,ANDY

Mar 17, 2009 | 1996 Audi A4

Not finding what you are looking for?
2007 Hyundai Azera Limited Sedan Logo

Related Topics:

98 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hyundai Experts

yadayada
yadayada

Level 3 Expert

75807 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22133 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8172 Answers

Are you a Hyundai Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...