Question about Chevrolet 1500
Look for the relays that control the lights. There should be one for the taillights. Find out if it is faulty by switching it with another relay.
Posted on Dec 31, 2010
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: 1991 volvo tail lights
Could you take out a bulb and with a testlight/probe check that you do in fact have power to that circuit .Also check that they are the correct bulb for that application I have seen people put indicator bulbs in where therse supposed to be a double filament bulb.Does the base of the bulbs lead contacts line up with the two steel terminals inside the plug?
Posted on Oct 20, 2008
check the break light switch it is should be at the top of the brake pedal you can unplug it and jump plug with a paper clip to test if lights work switch is bad
Posted on May 27, 2009
SOURCE: 97 CAMRY TAIL LIGHTS PROBLEM
You are right you do have a short,but it's easy to fix at the same time it is expensive. In your trunk area you will find a bulb out relay it can be either in the right corner or left corner panel in the trunk area,if not there if may be under the rear deck of the trunk(under the rear window inside the trunk) It might be yellow brown or green.One fron the junk yard will work just as good as a new one.If you are skillful you can open it and solder the burned circuit,but you have to know what you are doing.You also neet to find out if you had a bad bulb that shorted so you can rest knowing that what caused it to burn out in the frist place is fixed.
Posted on Jul 23, 2009
need to know if your third brake light up high is working or not.if it isn't,you need to check the brake light switch on the brake pedal with a test light,one side hot all the time,the other side should turn hot when brake pedal is pushed.
Posted on Jan 19, 2010
Check that your brake light switch is working. It is located on the upper part of the brake pedal under the dash. It should have current going in and when depressed the current should go thru the switch. if it is working check to make sure current is getting to the bulb. If not you have to find where the current stops and repair the wire.
Posted on Jul 18, 2010
Tips for a great answer:
Mar 26, 2017 | 2003 Cadillac Escalade
Sep 01, 2014 | Cars & Trucks
Aug 24, 2011 | 2006 Toyota Prius
May 26, 2011 | Chevrolet Tracker Cars & Trucks
Apr 06, 2011 | 1999 Jeep Grand Cherokee
Jan 20, 2011 | Jeep Cherokee Cars & Trucks
Dec 27, 2010 | 1994 Chevrolet Suburban
Apr 14, 2010 | 1989 Toyota Camry
Mar 31, 2009 | 2006 Dodge Stratus
25 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: