Question about 2005 GMC Canyon

Open Question

How to take the coil pack off to get to the plugs,05 Canyon 5 cyl

Posted by on

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2004 Sorento began with code P0305, cyl #5 misfire. Inspected and replaced plugs, wires, and coil pack on cyl #2. Repair shop told me cyl #5 injector bad so they replaced. Still has misfire.I suggeste


If you had code P0305, I don't know why they would have done anything to the #2 cylinder but if they have already replaced the plugs, wires and injector; here are a few more items to check:
1) Check connections from ECM. Look for any corrosions or bent/broken pins.
2) Check the fuel line pressure
3) Check the engine compression
4) And if the above are good, then you will probably have a defective ECM

Nov 28, 2014 | Cars & Trucks

2 Answers

I am having trouble fiquiring out which wire goes to which plug. The wires are different lengths and the correct wire length has to go specifically with the correct plug. I have the firing order dia


The firing order is 1-2-3-4-5-6
Cyl #1 is front left when looking at engine front to back
left coil pack connects to cyls. 5-2
center coil pack connects to cyls. 3-6
right coil pack connects to cyls. 4-1
It doesn't matter which connector on the coil you use just that the cylinder is connected to the proper coil pack (the coil fires both plugs at the same time, twice per each full 4 stroke cycle)
1998 Chevrolet Lumina
3.1 liter V-6 VIN "M" 94760154.gif

7aedc9b8-0448-4420-b824-420afd929143.gif

Dec 20, 2013 | 1998 Chevrolet Lumina

1 Answer

Hyundai 2.7 P303, P306 at the same time


I would say its the coil. A crank or cam sensor could cause one cylinder to miss, or go completely dead, but I doubt it would affect two cylinders. And you would get a code for either sensor.

May 01, 2013 | 2001 Hyundai Santa Fe

1 Answer

Where is the egr valve located on a 2005 gmc canyon truck


The 5 cyl engine looks like it is mounted on top of the exhaust manifold.

Aug 16, 2012 | 2005 GMC Canyon

1 Answer

Why is scanner showing DTC P01365 Ingnition Coil #5 Control Circuit Low Voltage and have Missfire on #1 cyl


because you have a bad #5 coil, and a bad plug in the number one cylinder.
Or because your wires are leaking would do it too.

Oct 28, 2011 | 2001 Oldsmobile Aurora

1 Answer

Sport Wrangler 6 cyl. Engine lite flashing. Diagnostic tool lists code PO305. I looked it up and it states misfire in cyl #3 & 5. How do I fix this?


Check the plugs, wires and coil pack for these two cylinders. Most lilkely it is the coil pack, they work for 2 cyclinders at a time. cylinder motors use 3 and 8 cyl moters use 4 of these. If your und=sure where the coil pack is, follow it backwards from the spark plugs.

Jul 08, 2011 | 2002 Jeep Wrangler

1 Answer

Ignition problem


sounds like the factory immobiliser

May 28, 2009 | 2005 GMC Canyon

1 Answer

Where are the spark plugs on my inline 5 cyl. ?


they are down the center of valve cover you will have to remove coil packs to get too them.

Jan 21, 2009 | 2005 Chevrolet Colorado

Not finding what you are looking for?
2005 GMC Canyon Logo

Related Topics:

65 people viewed this question

Ask a Question

Usually answered in minutes!

Top GMC Experts

yadayada
yadayada

Level 3 Expert

75797 Answers

Freddy

Level 3 Expert

1311 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Are you a GMC Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...