Question about 1999 Jeep Cherokee

1 Answer

Hey guys im pulling a p0138. i have a 99 jeep cherokee limited i checked the 15 amp fuses and replaced the upstream and downstream o2 sensors and it still keeps popping up. The check engine light is still on. any ideas?? i read that it could be to high of fuel pressure

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 329 Answers

Harness or connectors (The sensor circuit is open or shorted). Rear heated oxygen sensor (Bank 1) may be faulty. The rear heated oxygen sensor (or sensor 2), after three way catalyst (manifold), monitors the oxygen level in the exhaust gas on each bank. Check your connections and make sure the right sensor is in the right location.

Posted on Dec 30, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Im changing O2 sensors on 2004 Ford Expedition and noticed upstream and downstream sensors look different. I bought four O2 sensors from Autozone and they all look like the downstream sensor. Can I use...


Well you failed to do your research

First you buy NGK or Bosch Sensors

They get replaced every 100,000 miles or
sooner ,if they fail

You can leave the rear/monitor/downstream ones
or replace if you like,don't have to

Yours had bosch out of the factory

You get your parts from Rock Auto.Com

You get wix oil filters-about 4 to 6
You Get champion one piece plugs for that motor
You get 2 upstream & 2 down stream sensors

If you go to NGK site the part # are there,their different

If you removed the sensors first-- to learn something-- you
would have the brand & number on them,question answered


You get at least 8 ignition coils -as you will need them (Wells)

Take back the auto zone stuff-you paid too much & they
apparently didn't help you or you have a lot to learn

Jul 16, 2014 | 2004 Ford Expedition

1 Answer

How any oxygen sensors are on a 1999 grand cherokee laredo 4.0 & were is it/they located?


On Grand Cherokee oxygen sensor locations for 4.0 and 4.7 engines, check this diagrams...


12_18_2011_2_25_33_pm.jpg


12_18_2011_2_26_23_pm.jpg

The Oxygen Sensors (O2S) are attached to, and protrude into the vehicle exhaust system. Depending on the emission package, the vehicle may use a total of either 2 or 4 sensors.

Federal Emissions Package (4.0L and 4.7L engines):
Two sensors are used: upstream (referred to as 1/1) and downstream (referred to as 1/2). With this emission package, the upstream sensor (1/1) is located just before the main catalytic convertor. The downstream sensor (1/2) is located just after the main catalytic convertor.


California Emissions Package (4.0L engine):
On this emissions package, 4 sensors are used: 2 upstream (referred to as 1/1 and 2/1) and 2 downstream (referred to as 1/2 and 2/2). With this emission package, the rear/upper upstream sensor (2/1) is located in the exhaust downpipe just before the rear mini-catalytic convertor. The front/upper upstream sensor (1/1) is located in the exhaust downpipe just before the front mini-catalytic convertor. The rear/lower downstream sensor (2/2) is located in the exhaust downpipe just after the rear mini-catalytic convertor, and before the main catalytic convertor. The front/lower downstream sensor (1/2) is located in the exhaust downpipe just after the front mini-catalytic convertor, and before the main catalytic convertor.


California Emissions Package (4.7L engine):
On this emissions package, 4 sensors are used: 2 upstream (referred to as 1/1 and 2/1) and 2 downstream (referred to as 1/2 and 2/2). With this emission package, the right upstream sensor (2/1) is located in the right exhaust downpipe just before the mini-catalytic convertor. The left upstream sensor (1/1) is located in the left exhaust downpipe just before the mini-catalytic convertor. The right downstream sensor (2/2) is located in the right exhaust downpipe just after the mini-catalytic convertor, and before the main catalytic convertor. The left downstream sensor (1/2) is located in the left exhaust downpipe just after the mini-catalytic convertor, and before the main catalytic convertor.

Hope this helps; also keep in mind that your feedback is important and I'll appreciate your time and consideration if you leave some testimonial comment about this answer.

Thank you for using Fixya, and have a nice day.

Dec 13, 2011 | 1999 Jeep Grand Cherokee

1 Answer

P0171


Ho Joanne:
On Grand Cherokee oxygen sensor locations for 4.0 and 4.7 engines, check this diagrams...


12_18_2011_2_25_33_pm.jpg


12_18_2011_2_26_23_pm.jpg

The Oxygen Sensors (O2S) are attached to, and protrude into the vehicle exhaust system. Depending on the emission package, the vehicle may use a total of either 2 or 4 sensors.

Federal Emissions Package (4.0L and 4.7L engines):
Two sensors are used: upstream (referred to as 1/1) and downstream (referred to as 1/2). With this emission package, the upstream sensor (1/1) is located just before the main catalytic convertor. The downstream sensor (1/2) is located just after the main catalytic convertor.


California Emissions Package (4.0L engine):
On this emissions package, 4 sensors are used: 2 upstream (referred to as 1/1 and 2/1) and 2 downstream (referred to as 1/2 and 2/2). With this emission package, the rear/upper upstream sensor (2/1) is located in the exhaust downpipe just before the rear mini-catalytic convertor. The front/upper upstream sensor (1/1) is located in the exhaust downpipe just before the front mini-catalytic convertor. The rear/lower downstream sensor (2/2) is located in the exhaust downpipe just after the rear mini-catalytic convertor, and before the main catalytic convertor. The front/lower downstream sensor (1/2) is located in the exhaust downpipe just after the front mini-catalytic convertor, and before the main catalytic convertor.


California Emissions Package (4.7L engine):
On this emissions package, 4 sensors are used: 2 upstream (referred to as 1/1 and 2/1) and 2 downstream (referred to as 1/2 and 2/2). With this emission package, the right upstream sensor (2/1) is located in the right exhaust downpipe just before the mini-catalytic convertor. The left upstream sensor (1/1) is located in the left exhaust downpipe just before the mini-catalytic convertor. The right downstream sensor (2/2) is located in the right exhaust downpipe just after the mini-catalytic convertor, and before the main catalytic convertor. The left downstream sensor (1/2) is located in the left exhaust downpipe just after the mini-catalytic convertor, and before the main catalytic convertor.

Hope this helps; also keep in mind that your feedback is important and I'll appreciate your time and consideration if you leave some testimonial comment about this answer.

Thank you for using Fixya, and have a nice day.

Dec 13, 2011 | 1999 Jeep Grand Cherokee

1 Answer

My 1999 honda odyssey have a light on in the check engine, i went to the mechanic & plug it to the small computer, the computer said no response to code P0138B BANK 1 SENSOR 2 HIGHT VOLT, the mechanic...


There is are upstream and downstream O2 sensors. 1 or 2 (upstream) before the catalytic converter which sends signals for closed loop fuel control and OBD II monitoring, and 1 (downstream) after the catalytic converter, which is used to monitor the catalytic converter operation. The PCM monitors the signal from each O2 sensor.

Nov 02, 2010 | 2006 Honda Odyssey

1 Answer

Universal o2 censor has 2 white 1gray 1black existing wires areblack/tan dkgreen/orng blk/ltbl blk/pink


First what do you mean by a universal o2 sensor? You must make sure that you have the right o2 sensor, most newer vehicles have four o2 sensors 2 upstream and 2 downstream, upstream and downstream are meant to show where the sensors are in relation to the catalatic converter,some o2 sensors have 1 wire or up to 4 wires most with four wires are heated o2 sensors so you need to be sure you ve gotten the right o2 sensor for you vehicle as well as the right replacement for the proper location! My experience is that most after market o2 sensors have the same colored wires as the vehicle. Also most o2 sensors have electrical plugs? If you need help finding the right o2 sensor for your vehicle then please dont be affraid to ask!

Feb 12, 2010 | 1996 Jeep Grand Cherokee

2 Answers

Oxygen sensor confusion


1/1 is upstream sensor on the number 1 cylinder side, 1/2 is the downstream of the number 1 cylinder side, 2/1 is the upstream of the number 2 cylinder side, 2/2 is the downstream of the number 2 cylinder side. Hope this helps.

Aug 10, 2009 | 2003 Jeep Grand Cherokee

1 Answer

Replace oxygen sensors


these engines have 1 upstream o2 sensor and 1 downstream o2 sensor..the 1 in the rear exhaust manifold is the upstream and the 1 after the converter is the downstream..make sure you replaced the right one

May 15, 2009 | 1998 Plymouth Grand Voyager

1 Answer

O2 sensor where are they located


the 1996 grand only used 2 02 sensors on the 2 engine options.....the 5.2 v8 sensors are located 1 just in front of the convertor and the downstream is in the convertor....the 4.0l the downstream is in the convertor and the upstream is located in the exhaust manifold right under the intake manifold.

Dec 26, 2008 | 1996 Jeep Grand Cherokee

Not finding what you are looking for?
1999 Jeep Cherokee Logo

240 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jeep Experts

yadayada
yadayada

Level 3 Expert

74945 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7697 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...