Question about 1985 Jeep CJ7

1 Answer

No spark, coil is fine and pick up coil seams to be fine..

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

  • Expert
  • 92 Answers

Crank position sensor, I've replace many.

Posted on Dec 30, 2010

  • 1 more comment 
  • dannyperz Dec 30, 2010

    it is a four cylinder, I think it doesnt have a crank position sensor

  • dannyperz Dec 30, 2010

    this happened afther a rain but it was running fine when I turned it off everything werefine the next day when I try co start it up it didn't start...

  • mike lavoie Jan 03, 2011

    I was thinking back to the old days try an ignition module. About the size of a sandwich in a tin box with about 5 wires going to it. hook up a test light on neg battery and the other to the coil. It should flash quickly. If not replace it. I did a few on late 70's vans.

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What is wrong if my mercedes s 500 1995 v8 is running on 4 cylinders only.I have checked the spark plugs, plugwiers ,two destibutors and routers and thy seam to be allrite .The car has got two coils asswel


With the little information you provided, My first suggestion in s a faulty pick-up coil in one of the distributors. Because you are missing half of your cylinders, your problem is likely isolated to one of the two distributors. If the Cap/rotor are good on both, the pick up coil (or equivalent) in one of the distributors may be faulty and will cause all the plugs on it to not fire.

Mar 21, 2015 | 1985 Mercedes-Benz S-Class

1 Answer

Where is the ignition control module on a 2001 Ford pick up


If your engine has coils for each cylinder, the engine computer controls spark. If you have two coil packs, one for each bank of cylinders, the module is part of the coil.

Feb 06, 2015 | Ford Cars & Trucks

1 Answer

2.2 l subaru wont start


Coil or ignition module may have failed.

Jun 24, 2014 | 1991 Subaru Legacy

1 Answer

My truck quit cranking had it scanned and says crankshaft sensor replaced it scanned it again no code but still dont have fire from ignition coil or dis cap


Hi,
That looks like a pick up coil malfunction.
Check and replace the pick coil in the distributor assembly, it may also just need a clean up.
Hope that helps!

Dec 06, 2011 | 2000 Cadillac Escalade

1 Answer

Have a 1993 gmc sierra. runs fine most of the time . but will just kill sometimes out of the blue. does not matter if it is warmed up or cold. when it dies will just turn over but not start. replaced spark...


When this truck dies,does it have spark,or fuel pressure?Check it for no spark,if it has no spark,replace the ignition module.These gm year models are bad to go out ,and the distributor pick up coil also.Replace the module first,if this does not help,replace the pick up coil.NOW ON A FUEL RELATED PROBLEMit could be fuel pump,fuel pump relay,or the pick up coil.The pick up coil pulses the injectors,and the spark.I hope this helps,if not let me know.

Sep 20, 2009 | 1993 GMC Sierra

1 Answer

Truck will turn over but will not start


try changing the ignition module

Apr 27, 2009 | 1988 Ford F 150

1 Answer

Ignition, no spark at all. not to the spark plugs or distributor.


Sounds like you have a bad distributor. Most of the time there is a magnetic sensor that breaks inside of the distributor, but it will cost just as much to go ahead and replace the whole distributor. make sure you mark where the old one was before you remove it and line the new one up. That should get you going.
Please remember to rate this fix.

Dec 29, 2008 | 1986 Mitsubishi Montero

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

97 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jeep Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Kevin Daniels

Level 3 Expert

1455 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...