Question about Honda Accord

Open Question

Where is the MES connector to reset the airbag dash light for 2005 Honda Accord Euro. Thanks

Posted by on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 142 Answers

SOURCE: Airbag dash light

You can reset the light by disconnecting the battery fro 15 minutes and then reconnecting it. If the light comes back on you will have to go to the dealer for a fix. A general scanner will give you a code with a generic description of the problem but to have it fixed right you need to unfortunately bring it in.
Please remember to rate this solution.

Posted on Feb 13, 2009

Ad
  • 2 Answers

SOURCE: reset airbag light 2004 honda accord ex

unless you have the proper scaner you can do it but if not you going to have to take it to the dealer and check why is on to proprly repair the problem

Posted on Mar 29, 2009

dr_greg
  • 192 Answers

SOURCE: reset maintence required light on

turn ur key on , press ur odometer trip button till u get to ur oil life...once ur oil life is displyed, depress the button and hold it down till your oil life begins to flash, after it starts flashing, release the button then depress it and hold it down till it resets the oil life to 100%....your maint light and oil life should now be reset...

Posted on Apr 16, 2009

  • 462 Answers

SOURCE: 2005 honda crv airbag module location

Most of the time it's in the middle of the car under the center consol(consol with stereo) , SRS module usually mounted on the floor.

Posted on May 27, 2010

johnjohn2
  • 5763 Answers

SOURCE: 2005 Honda Accord 4cyl cruise control does not work

check all your fuses first then take a look at the brake switch and there is a criuse cancel switch also, i think there may be a problem with the switch,even if the cancel switch was bad i think the power would still stay on but cruise would just stop and power would stay on. check fuses and switches anyway to be sure then take a look at the power switch.

Posted on May 30, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

97 honda accord. Airbags on dash an steering wheel deployed. How do I repalce them and reset the system.


Get replacement airbag, and there is a electrical connector in the steering wheel, unplug old bag and plug new bag in. PLEASE disable the airbag system before doing this or new bag can deploy!
Then you should be able to mount bag and then rearm system

May 31, 2014 | Cars & Trucks

1 Answer

How can I unplug MES connector?


http://wemech.hubpages.com/hub/Reset-SRS-Civic

Apr 24, 2014 | 2008 Honda Accord

1 Answer

I installed an aftermarket cd player in my 2002 accord, why is my SRS light on?


Have you checked all the relevant fuses for the SRS system? That would be a good place to start. Accidentally shorting out a circuit while checking for power during the install could have blown a fuse.
Did you buy a plug and play wiring kit for this install? If you did, I would try unplugging it and disconnecting a battery cable for 10 minutes. Reconnect the cable and see if the issue is still present.
If you hard-wired the unit in yourself, I would double check the wiring to make sure you haven't tapped into a wire in the SRS system, which could trigger a code.

Oct 12, 2017 | 2002 Honda Accord

1 Answer

Srs light on in 1996 Honda odyssey. I have read that i can erase codes by using the MES connector and a service tool. I have also read that anytime you work on the airbag system you must disable it first....


If you don't fix the underlying problem, the SRS light will just come back on right away. There is no way to bypass this. Fix it or live with the light. Erasing the code and not fixing won't help at all

Aug 25, 2017 | 1996 Honda Odyssey

2 Answers

What is the dash light srs, in a honda accord 2002 vtec engine 3.0


The SRS, or supplemental restraint system, on your Hondamag-glass_10x10.gif Accord 2002,


Read more: How to Reset a Honda Accord SRS Light | eHow.com http://www.ehow.com/how_6403892_reset-honda-accord-srs-light.html#ixzz0tQdveFZn
responsible for deploying the airbag in the event of an accident. If this system is malfunctioning, the airbag may not deploy properly during an accident. However, the system does warn you of a system malfunction. The yellow "SRS" light on the dash will light up, indicating a problem with the system. Once you've fixed the problem, you need to know how to reset the SRS light on your Accord

Read more: How to Reset a Honda Accord SRS Light | eHow.com http://www.ehow.com/how_6403892_reset-honda-accord-srs-light.html#ixzz0tQdgZ0ic

Jul 12, 2010 | 2002 Honda Accord

1 Answer

Battery was low and put in new battery,problem SRC Light stays on how can I reset the SRC light?


I'm guessing you mean the SRS light, yes. When you have a bad battery the battery voltage can drop below 10 volts. The SRS unit detects this voltage loss and set a DTC (diagnostic trouble code) for an internal SRS unit failure. You have to erase the DTC memory. You'll need an SCS service connector tool (P/N 07PAZ-0010100) You can order one from your local honda dealer. Don't worry its not more than $10. Then you'll have to find the MES 2pin connector located in the upper right hand corner of the drivers underdash fuse box. It can be gray, green or yellow in color. 1.)Turn the ignition switch off. 2.)Unplug the MES connector from the fuse box and plug your SCS special tool into the MES connector. 3.) Turn the ignition switch on. 4.) The (red) SRS light in the dash will come on for 6 seconds and then go off. Remove the SCS tool from the MES (2P) connector within 4 sec. after the SRS light went off. 5.) The SRS light comes on again. Reconnect the SCS tool to the MES (2P) connector within 4 seconds after the SRS light came on. 6.) The SRS light goes off. Remove the SCS tool from the MES (2P) connector within 4 sec. 7.) The SRS light indicates that the memory is erased by blinking twice. 8.) Turn the ignition switch off and wait ten seconds. You may have to do this procedure a few time to get the steps correct. If this sounds to complicated I'm sure your local Honda dealer would be happy to reset the light for you for no charge. Just let them know that the battery was recently replaced and you think that the SRS light came on due to low battery voltage. -Hope this helps:)

Jan 13, 2010 | 1997 Honda Civic

1 Answer

SRS light blinks 3 times


u will have to replace those vehicle impact sensors...remember some vehicles are different . never had to do it the past doesnt always mean its not the problem now...there is also more than those 2 front impact sensors in that vehicle..i know there are a couple inside the vehicle as well. under the front carpet and seats..the impact sensors inside the car are for ur side impact airbags and can be bad or reading deployed even if they didnt blow..good luck ...

May 09, 2009 | 2003 Honda Accord

1 Answer

Reset airbag light 2004 honda accord ex


unless you have the proper scaner you can do it but if not you going to have to take it to the dealer and check why is on to proprly repair the problem

Mar 29, 2009 | 2004 Honda Accord

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

96 people viewed this question

Ask a Question

Usually answered in minutes!

Top Honda Experts

yadayada
yadayada

Level 3 Expert

76682 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Kevin Daniels

Level 3 Expert

1455 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...