Question about 1993 Honda Accord

1 Answer

I took an alarm off of my 1993 honda accord. how do i reconnect my starter wires back to my ignition

Posted by on


1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.


    An user who is expert in 3 categories / brands.

  • Honda Master
  • 1,455 Answers

When you disconnected the starter interrupt relay, you have to reconnect the two large wires(black/white stripe) on the car's ignition harness, that the relay was connected to, back together. That is your car's starter wire. I'm assuming that you're the one who removed the alarm from your car and you know what wire I'm talking about.

Posted on Dec 30, 2010


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

1993 Honda Accord will not start with the Key but will push start.

hi make sure there is no starter kill circuit aftermarket alarm ,or remote starter if so i need the brand of the system by jumping the starter under the hood with remote start u need the ignition key to be in the run position before u crank the engine over then if it is the starter relay in the fuse box under the hood the engine will run just relace relay or check wires under the fuse box for corrosion hope it helps danny

Apr 30, 2014 | 1993 Honda Accord

1 Answer

2010 ford edge starts intermittently. Replaced battery - doesn't try to crank - just nothing.

Problem with 1998 Honda Accord 2010 ford edge starts intermittently. Replaced no crank is
1: a weak battery (try different good one, or jumper cable it)
2: bad cables or conn. from battery to starter.
3: bad starter.
4: bad key line (alarm cut, PRNDL switch open, bad ignition switch.
Five minutes with any voltmeter finds this easy.
or or hot wire the starter solenoid, to cut the problem in 1/2
this proves problem is in starter or battery
or in Key line, in 5 min flat, (a 100 year old test )

there are very simple tests for each of the 4. ask.

Aug 22, 2013 | 1998 Honda Accord

1 Answer

I have a 2003 Honda accord that will not start! Tried to jump battery..all fans and belts were running however car would not turn over...bought a new battery and replaced with old now my car want do a

I have seen issues like this on other Honda's and the problem turned out to be the ignition starter switch. Do this, jumper power directly to the starter solenoid trigger wire and see if the engine cranks.

Jun 30, 2017 | 2003 Honda Accord

1 Answer

How to install starter on 2007 honda accord lx 2.4l

I'm confuzzed. Does an Acer have a Honda accord starter?

Disconnect the + battery cable. Disconnect all wires on the starter, and remove the mounting bolts. Wiggle the starter out of the engine bay, and replace with the one you want to use. Reinstall the bolts and wires, and reconnect the battery + wire.

Dec 19, 2012 | Cars & Trucks

1 Answer

What could cause no spark when trying to start my 1993 Honda Accord lx 5 speed

No power getting to ignition system, bad wires, bad coil, another componet has failed in the ignition system.

Apr 23, 2012 | 1993 Honda Accord

1 Answer

I replaced the starter in my 04 Honda Accord, but it still wont start. I was wondering if there is a fuse for the starter that may have blown?

You need to check for twelve volts constant at the large wire and twelve volts in the start position at the small wire, I'm guessing you are missing voltage at the small wire and the maybe caused by a blown fuse,bad ignition switch, or an aftermarket or factory alarm system that is not disabled

Jul 31, 2011 | Honda Accord Cars & Trucks

1 Answer

I have a 1993 honda accord when i turn over the ignition i hear a clicking noise. then ill turn it back off and then turn over the ignition again and it turns over. sometimes it will click a couple of...

You need a new starter solenoid. Not a whole new starter, just the electromagnet switch everyone calls a solenoid. Follow the red battery wire and it is usually the first thing you come to (about half the size of your fist. Get it changed soon because soon it will only click. It is also possible you have dirty battery terminals. The may look clean but take them off and wire brush each one (one at a time)don't ever let wire on battery touch. Also remember all metal on the car is connected to the negative battery cable. Check battery terminals first (cheap and easy) then solenoid. Solenoid is about 35 bucks at auto parts store or 70 at Honda (just guesses). Again, disconnect battery before doing this work.

Jun 07, 2011 | 1993 Honda Accord

1 Answer

HOnda Accord EX 1998 ALARM

Have you tried putting your Valet (original keys) into the ignition and turning it to the II position?

Aug 23, 2008 | 1998 Honda Accord

Not finding what you are looking for?
1993 Honda Accord Logo

117 people viewed this question

Ask a Question

Usually answered in minutes!

Top Honda Experts


Level 3 Expert

76132 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Kevin Daniels

Level 3 Expert

1455 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides