Question about Nissan Quest

1 Answer

I just popped the hood on my 95 Nissan Quest. I noticed that whatever belt is in the front left hand corner is dangling loose. What is that belt for? Will it cause damage to drive it a few miles to a mechanic?

Posted by Anonymous on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Nissan Master
  • 715 Answers

If your steering and your temp is ok, I would say it is the A/C belt, and if you leave the belt in there it can wrap around something else, you might be able to just pull it out, try the A/C it probibly won't get cold.

Posted on Dec 30, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Nissan quest dead battery - keys locked in van - get hood open


you need too get some sort of hook on the end of a handle, something smaller but still strong enough to pull against with out bending or breaking. then standing at the front of the van using a flashlight look through the grill until you find the hood latch, then locate the black cable running into the side of the latch hook on to it and pull as hard as you can while simultaneously bouncing pressure on the font center area of the hood with your other hand until you hear/feel the hood latch release or "pop"!

Nov 10, 2013 | 2006 Nissan Quest

1 Answer

Nissan quest 2007 whining noise in hood


Your right its probably your serpintine belt. It is a cheap repair to have a mechanic tighten belts or replace if nessasary. Better that then be stranded. Its could also possibly be your power steering pump if your low on fluid. But that you should have noticed earlier each time you turned a corner.

Apr 14, 2012 | 2007 Nissan Quest 3.5 Minivan

1 Answer

How to tighten belt on 2004 nissan quest


Best to remove the front passenger side wheel. Then snap out the clips that are holding the plastic cover towards the front. Now it will expose the belt area. Loosen the locking nut of the tensioner(idler) pulley located to the right of the Crankshaft Pulley. Crankshaft pulley is the one that handles both belts (alternator and the power sterring pump). Right to that next to it, upwards is the idler pulley. You will find the alternator pulley to the right of that further up. Open the hood of the van and locate the adjusting nut behind the alternator on the idler pulley from top and loosen that as well. Once both these are loosened, belt will loosen and will be easy to remove. Now replace it with the new belt the same way it was wrapped. Go over the crankshaft pulley; under the A/C compressor pulley; over the alternator pulley; under the idler pulley. tighten the adjusting nut from the top through the hood until the play on the belt (when pressed in) is less than 1 inch. Now lock the tensioner pulley by tightening the locking nut. Start and run the car for 15 mins to see if everything is ok.

Jul 28, 2010 | 2004 Nissan Quest

1 Answer

Firing order diagram neededbfor 95 nissan quest


For the 1995 Nissan Quest 3.0L SOHC V6:

Firing Order:
1-2-3-4-5-6

Cylinders:
.......(back)......
1........3........5
2........4........6
.......(front)

Distributor:
....(back)
.......2
3............1
4............6
.......5
...(front)

Let me now if this helped, or if you have additional information or questions. Feel Free to contact me at FixYa.com!

Apr 16, 2010 | 1995 Nissan Quest

1 Answer

95 nissan quest front passenger side power window does


driver side switch is not working replace it

Oct 12, 2009 | 1995 Nissan Quest

1 Answer

2004 Kia Sedona shakes/vibrates when turning a corner and accelerating from 0-40. Repair shop replaced front left tire because stell belt showing. Stopped for day after repair then started again tod


one check if your wheels are tight 95 ftlbs if mag wheels remove make sure no heavy corrosin arond hub and rim wheel will not seat properly and come loose. 2 check front end if belts are showing check ball joints and tie rides for wear vans are also known
for bad wheel bearings even if you cant hear it at 80km50mph give or take it may have ecssive play
check that front end .otherchecks ps pump and or loose p/s belt

May 28, 2009 | 2004 Kia Sedona

1 Answer

1995 nissan quest GXE: Power seat belts stopped working.


the passive restraints control module is behind the panel by the gas pedal.

The fuse is a 30 amp fuse taht also controls power window. in battery box under hood in front of battery. chart on cover.
then it goes through left hand circuit breaker which is behind leftkick panel above fuse panel I think. there are 2 circuit breakers next to each other.

May 22, 2009 | 1995 Nissan Quest

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

53 people viewed this question

Ask a Question

Usually answered in minutes!

Top Nissan Experts

yadayada
yadayada

Level 3 Expert

76109 Answers

Phil Lovisek
Phil Lovisek

Level 3 Expert

726 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Are you a Nissan Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...