Question about 1999 Ford Windstar

2 Answers

Where does the vacum hose go - 1999 Ford Windstar

Posted by on

Ad

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 312 Answers

Vacuum Hoses all ultimately lead to the intake manifold. Otherwise they won't draw a vacuum.
Now vacuum hoses may go to other parts, like "mini" vacuum manifolds" or T-fittings, or X-fittings. But
Somewhere down the road they all lead to the intake manifold. There may be several place on the outside of the manifold for various sizes of hose. But they will be there. The power brakes are connected to a large hose that goes to that same manifold.
That being said. If a hose if disconnected from the manifold, and there is a hole in the manifold cover where it is supposed to go. The engine will have a hard time idling, etc.
Hope this helps.
Best, Mark

Posted on Dec 30, 2010

Ad
  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Expert
  • 46 Answers

WHICH ONE? THER SHOULD BE A HOSE ROUTING ON UNDER HOOD STICKER,IF NOT GO TO AN AOTOZONE AND SOMEONE WILL PRINT YOU ONE.

Posted on Dec 30, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How dose egr valve connect to intake on 93 buick lesbre 3.8


Just find a vacume hose that has vacume to it when you accelarate with car running pull a vacume hose off from carburator check by putting your finger or a vacume gage to it to see if you got vacume if not accelarate the carb by pushing accelarator (left side of carb driver side) if you have vacume when you accelarate you can use that vacume line

Jun 27, 2011 | 1993 Buick LeSabre

1 Answer

Where do the three vacum line go on the egr on a 1985 corvette


You do not need to connect the three vacume hoses to the EGR just find one that has vacume to it upon accelaration with the car running pull a vacume hose off the carburator with a vacume gage or your finger check to see if you got vacume if not accelarate carb if you do connect vacume line to EGR

Jun 27, 2011 | Chevrolet Corvette Cars & Trucks

1 Answer

My truck has problemms shifting from 2nd to third,the rpms usually runup to 3000 before shifting,sometimes it holds at that rpm for some time.


check vacum hose running to back of trans for vacum if has good vacum replace modulator valve on transmission(where vacum hose ends).its a easy fix.

Feb 15, 2011 | 1996 GMC Suburban

1 Answer

I Had Ford explorer 2003 when i take stop engine shuts off any help?


I have seen many of these die out due to a broken or cracked vacum hose. Look under the hood and listen for a whistling or hi vacum noise. You can also take carb cleaner and spray around vacum hose and pcv valve and intake. If the motor revs up or stalls out when you do this then you definitl have a vacum leak. Find and replace.

If I am wrong about the vacum hose I woulds inspect idle air control motor, throttle position sensor, (both canbe cleaned as a temporary fix) or worst case may be a fuel pump.

Oct 22, 2010 | 2003 Ford Explorer

1 Answer

Air vents won't move nor will the heat to cool vent move


Sounds like you have a broken vacum hose somewhere or it became disconnected. I would look under the hood for very small vacum hose near the firewall or near or disconected vacum hose near evaporator case.

Oct 19, 2010 | 1995 Chevrolet C/K 2500

1 Answer

I'm not sure if i got the egr vac hose and the fuel pressure reg hose backwards?


The vacum hose that goes to the fuel pressure regulator will have vacum all the time and will come from the in take, the one for the EGR will not have vacum all the time and that hose will come from the EGR control solenoid a black looking solenoid with two ports coming out of it.

Jun 14, 2010 | 1999 Ford Expedition

1 Answer

'06 Silverado 4.8L Air Vents selector does not open and close any vents anymore. Stuck in the Defrost/Feet position.


Look for vacum hose under hook going into fire wall, check for vacum if none add vacum or look for vacum hose hanging some where and reconnect.

Dec 17, 2009 | 2006 Chevrolet Silverado 1500 2WD

1 Answer

Final plumbing when fitting engine


these hoses are 4 the fuel emission syatem on the mtr they are vacume

Mar 31, 2009 | 1990 Toyota Land Cruiser

1 Answer

My 4x4 won't engage except if u get out and lock the hubs on my f-350 2006


you must have those vacume operated automatic locking hubs that can be manuely locked.switch the truck to 4x4 operation. and get behind the front wheels ,pull of the vacume hose at the back of the spindle to see if engine vacume is getting down to the hubs at all.with the truck running you should have 18 to 20 inchs of vacume at each hose. if no vacume is felt. check the soleinoid behind the right head light for switching vacume down to the spindles. if there is vacume the problem is in the hubs themselves.

Mar 29, 2009 | 2006 Ford F 350 Super Duty

Not finding what you are looking for?
1999 Ford Windstar Logo

Related Topics:

181 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

76848 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

fordexpert

Level 3 Expert

5546 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...