Question about 1996 Jeep Grand Cherokee

1 Answer

The ignition will not turn with the key for the jeep.

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 2,296 Answers

Turn your steering wheel left or right side. If it moves, then good for you. But if doesn't, it probably means that locking system in the steering wheel is damaged. For this, you can just turn the steering wheel opposite to the direction of the car wheels. Most of the time, cars are turned off with the wheels turned on the opposite directions, which makes the key get stuck in the ignition due to pressure in the steering wheel. When the pressure is released from the steering column, a click can be heard and key is released.

If no luck, there might be a problem with shifter mechanism, which means that you have a trip to the repair shop in store for you. Get this problem addressed immediately, as it could mean that your shift interlock is out of order, which can increase the chances of deploying the air bag up in your face, causing a serious injury.

Posted on Dec 29, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2009 Jeep Commander --- Ignition problems. For the past few weeks, roughly 75% of turning the ignition OFF from RUN, the ignition will not release the key. Need to turn ignition on and off (potentially...


Hey Anon, Is this a total electronic key,,(push button start)..if so, its an electrical issue. If its a standard key urn ignition. try some DRY graphite on the key.. it will lubricate the switch without the mess of liquids... put the key in and out several times, put some more dry graphite on the key and repeat.. give this some time to work,, if this does not improve the switch.. its time for a new switch assy,

Jun 24, 2017 | Jeep Commander Cars & Trucks

1 Answer

Re program my key fobik for a 2011 grand Cherokee jeep


put program key in ignition turn ignition switch to on position engine off for 3 to 15 seconds.you should hear acoustic signal and immobilizer lamp will flash then turn off ignition switch.you need two program keys to do this procedure twice. with in sixty second insert non program key in the ignition switch turn to on position engine off for at least with ten minutes you should hear acoustic noise immobilizer lamp flashing turn off ignition switch if all failed the dealership have to use diagnostic equipment to reprogram ignition key or keys.

Oct 26, 2012 | 2011 Jeep Grand Cherokee

1 Answer

The security system locked the jeeps ignition but i dont know how to restart the system and i try to start it and it wont not even jumping it help


if you have both ' original ' keys that came with the Jeep - you can try and flip them through the system and get the Jeeps computer to accept them,, take both keys and sit in the drivers seat -- with one key put it in the ignition and turn to the on position - wait about 15 -20 seconds, remove the key and then put the other key in and turn to the on postion -- wait 15 to 20 seconds,remove the key and now put the first key back into the ignition and turn to the on postion and wait 15 to 20 seconds,,, now try and start the Jeep.
now if one of the keys is not an original key ( a clone key ) -- then this might not work,, and you will need a automotive locksmith to come out and re-program your keys to the Jeeps computer. since you already have keys, this is not a very expensive trip -- you will just be charged for the service call and the programming of the Jeep.

c...

Jan 05, 2011 | 2002 Jeep Grand Cherokee

1 Answer

Jeep - can't turn ignition key


your ignition barrell tumblers are getting stuck, you need to replace the barrell and tumblers at dealership. you can get the key to turn if you hold key in ignition and try and turn and at the same time tap the end of the key which normally jogs the tumblers to enable key to turn

Jun 01, 2010 | 2000 Jeep Grand Cherokee

2 Answers

I have a 2002 Jeep Grand Cherokee. I put my key


ur cylinder lock is going bad...... needs to be replaced

Apr 13, 2010 | 2002 Jeep Grand Cherokee

3 Answers

Jeep liberty 2002.....ignition key lock


Most commonly it is the key is worn out. If you have a spare key or your current one is not too badly worn, have a copy of it made and try it in the switch. You will have to have the copy key "coded" so it will disable the anti-theft system in order for the engine to start. If the new key doesn't fix your problem, you will have to replace the tumbler assembly.

Nov 20, 2009 | 2002 Jeep Liberty

1 Answer

I have a 2005 jeep cherokee 2.8 crd the key


disconnect the battery or pull the ignition fuse,then replace the ignition

Sep 21, 2009 | Jeep Cherokee Cars & Trucks

1 Answer

Key won't turn


The key problem could be a worn out key that is not disengaging the tumblers in the ignition switch or tumblers that are sticking(squirt a little wd40 in the ignition cylinder and move the key in and out a couple of times) inside the switch. Make sure the shifter is fully in park.

Mar 01, 2009 | 2002 Jeep Grand Cherokee

2 Answers

Key wont turn in the ignition


I work at jeep and this is very common. you need a new ignition lock cylinder. easy repair but you need to buy it from a dealer and bring the key and lock cylinder to a locksmith to get it coded

Jan 05, 2009 | 1999 Jeep Grand Cherokee

Not finding what you are looking for?
1996 Jeep Grand Cherokee Logo

138 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jeep Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Kevin Daniels

Level 3 Expert

1455 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...