Question about 1997 Jeep Grand Cherokee

1 Answer

Turn over will not crank and no fuel gauge dont work

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Genius:

    An expert who has answered 1,000 questions.

  • Master
  • 1,165 Answers

If the fuel gage doesn't work, and the engine isn;t starting, it's possible that the gas tank is empty.

Posted on Dec 29, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

01 Jeep grand Cherokee I have crank but no start no gauges no power at fuel pump. All fuses good under dash & hood . Turn key to on, 1st warning light low fuel. 2nd key w/ line 3rd check engine help


you used voltmeter at the pump?> or just didnt here it run
do say this...please. details, matter....
it told you low fuel is it? is the fuel gauge near "E"
why not state that first.?
dead gauges, be 1st right, smacks of gross power loss.
right>? not clear to me what no gauges means.
but the voltmeter is #1 no?

did you tests fuse that look ok. fuse that look ok can be bad.
no gauges, means all dead, no movement,
well the fuel gauge must work , does it, does it match reality?
cranks but never runs. good input there.

does not run for the jeep 3 seconds.? (ASD rules)
no 12vdc power to pump, when cranking,?
01 grand WJ jeep usa.
is the skim lamp off, the cluster lamp for SKIM security is first.
it must go out after key turn on, or it will never run, ever.
I can help.
WJ jeep
this jeep has a voltage gauge, it must read 12v keyon
if not power is lost, or battery low.
if cranks that tells me the fues blew.
skim cuts spark and fuel, not cranking btw.
2002 cluster
http://jeepdied.com/cluster2002GC.JPG
see that lamp 12, if stuck on car will never start but will crank.
the lamp falses if skim is not working or stays on for ******* key.
we SCAN ALL CARS NOW.
IF You can not scan a modern jeep then it can near impossible to diagnose (a hard cold fact)
IF the ASD fails to work, the PCM tells you every time
all 8 ways for it to fail.
but that takes a scan tool (any modern scanner works,)

http://jeepdied.com/no-start.html

Jan 26, 2017 | 2001 Jeep Grand Cherokee

3 Answers

Jeep will crank but no start what can my problem be


well you need to find out if it is spark or fuel giving you the problem check for spark first they have problems with the crankshaft position sensor which could be the problem not easy to get to its bolted to the bell housing with 2 bolts if you do not have spark that would be a good place to start

May 20, 2014 | Jeep Grand Cherokee Cars & Trucks

1 Answer

Not getting fuel


which engine?
my guess, is it really dont start.
so the assumption is not getting fuel.???
got spark? (3 or 4 cylinders , 1.0 or 1.3L)?
compression at spec? 150 min, warm. or hot?
if test fuel works or runs for 3seconds , proving engine is ok but no fueling?
that and only that means not getting fuel.

the fuel pump on many cars does not turn on , until you crank the engine.
The ECU decides this, (software inside) and varies.
some run for 3 seconds key on. others, not. depends on country and year, and engine sizes, (only year was stated)

EFI rules to use:
ECU does not inject if spark is bad. BY DESIGN.
nor at wide open throttle ,cranking (bad TPS?)
all ECU operater the pump, when cranking and running.
so check the fuel pressure with a real gauge, cranking.
only that works.

Apr 22, 2014 | 1994 Geo Metro

1 Answer

Bmw 318i problems


dont under estimate your battery connections remove and clean and connect tightly, then check all your fuses if needed, then go from there.

Dec 10, 2013 | Cars & Trucks

1 Answer

2005 Chevy 2500 6.0 V8 will crank but won't start


clogged air filter can make a car hard to start also.leaking fuel injectors flooding out engine.after turning off.take a fuel pressure gauge hook it up.turn ignition on .dont start engine.let your fuel pressure build up.55-62 psi.then turn off ignition.if fuel pressure start leaking down.your fuel injectors are leaking. if they dont leak. you have problems in the ignition system.

Jun 24, 2009 | 2005 Chevrolet Silverado 2500HD 2WD

2 Answers

2001 Will crank but wont start


Hi , these trucks are notorious for fuel pump issuse. (I have 2 in the shop now).First check for spark if spark is present then we need to check for fuel.if a presure gauge is avail,install the gauge and crank the engine.if presure increases to 50-60 psi fuek is probably not the issue. now if a gauge is not avail you can remove the air cleaner/snorkle assy.spray some carb cleaner in the throttle body,then try to start if (if it starts for a second the problem if fuel.now if it starts go under by the fuel tank,reach up (from the drivers side and unplug the fuel pump plug (4 wire) have some one crank the engine ande check for battery power on gray wire durring cranking,if battery power is present check black wire for good ground.if both power and grounds are present pump is no good.if now power then swap the fuel pump relay w/ same design relay (in the underhood relay center) relays are also a known issue w. the s and t trucks,good luck Thanks

Jun 18, 2009 | 2001 Chevrolet S-10

1 Answer

If Fuel gauge don't work it will not start.


u have a bad ignition switch(electrical part not were d key goes

May 23, 2009 | 1998 Jeep Cherokee

1 Answer

96 plmoth


if dont have sranner hook test light at injector groung side that would tell that crank sensor is working or the pump is weak hook up fuel pressure gauge and watch gauge

Sep 06, 2008 | 1996 Dodge Caravan

Not finding what you are looking for?
1997 Jeep Grand Cherokee Logo

90 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jeep Experts

yadayada
yadayada

Level 3 Expert

76682 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Kevin Daniels

Level 3 Expert

1455 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...