Question about 1995 Nissan Pathfinder

1 Answer

Put battery and still no lights guages or anything.

Posted by on


1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.


    An expert who has answered 1,000 questions.

  • Master
  • 1,098 Answers


Check the earth lead from the car battery to the car body, thi is the black one, ensure it has a good contact with the metal of the car body.Make sure there is no rust or corrossion. NOT the red wire just the black one goes to the car body.

Try that then get back to me if no joy.



Posted on Dec 29, 2010

Testimonial: "K. We fixin to do some major work to this 95 and 93 Nissan pathfinders. As for now we robbed the Exaust Manifold to fix the 95 but haven't started."

  • shrekdarough Dec 29, 2010

    Sorry was gonna give you the whole spill but wouldn't let me fit it in the box. I just wanted to know that the questions would go through in case we get into a bind. Wish me luck.

  • Dan Doherty
    Dan Doherty Dec 29, 2010

    Good luck, here to help if I can




1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

2004 F150 the battery dies if not ran every day and now has started making a bell dinging sound while driving

are any of the warning lights or guages in the red zone? if the battery light is on it could mean the battery and or altenator went bad, is the charging guage in the red zone?, it could be the altenator. if the battery is good and charging system is working good you might have a draw on your battery, dicconsct the negative battery terminal over night when you park , replace it the next morning, if it starts right up look at anything you have installed recently like electronics or brake assist kits dissconect one by one until you find the culprit...

Apr 14, 2014 | Cars & Trucks

1 Answer

1997 gmc sierra. interior light left on, battery dead, jump started,ran for 15 min. tried to restart after shutting off only thing that happened was drivers lock locks and 3 guages, oil , gas, and pressure...

You probably didn't run it long enough to charge up the battery. Put a voltmeter on it and see if it needs charging, or get it charged up, or get another jump and run it for a half hour and then see if battery is charged up enough to start the engine.

If the security light is on or flashing, you may need to reset the security system.

Oct 26, 2013 | GMC Cars & Trucks

1 Answer

I had the car in storage for 35 days. Upon startup, battery was dead. I took the dead battery out(only 1 year old) and put in a good battery which started the car, while the car was running good I took out...

You recycle the old dead battery

Have no idea why you even put that back in

Common sense & your friend is correct

You don't disconnect anything on today's
vehicles, even with the key on

Put in a new battery,start the car, warm it up
& drive it for awhile & maybe you will get lucky
& it will complete some of the drive cycles & run some
monitors ,you know nothing about & it will be fine

If not, your mechanic friend should be about to stop
by with the bosses scan tool & help you out

Sep 23, 2011 | 1999 Acura TL

2 Answers

Peugeot Expert Van- Erratic temp guage & 'STOP' dashwarning light

temperature sender unit top of engine cylinder head make sure its okay
and make sure wire going to it is not grounding
if it grounds or earths it will send the gauge up and down

Feb 22, 2010 | Peugeot Liberte Cars & Trucks

1 Answer

2004 Envoy won't turn over and guages don't work

Check and make sure that both battery connections have a SOLID connection...Make sure they are both clean...If they are not clean take them off and simply take a wire brush to them...If this does not work consult someone else

May 05, 2009 | 2004 GMC Envoy

1 Answer

I have a 1985 Cheverolet pick-up. I have a cluster of under dash guages that I installed about ten years ago. Last week I replaced them with new ones. After doing so, My rea tail lights will not cut...

It's probably the brake lights that are staying on, check again, if the brake lights are staying on the brake light switch needs to be replaced. The reason I believe it's the brake lights is that they will turn on even with the key off so make sure which lights are staying on.

Click these links for more info.
Link 1
Link 2

Thanks Good Luck
Appreciate to rate as "Fixya"

Mar 10, 2009 | Chevrolet S 10 Cars & Trucks

1 Answer

I replaced car battery engine light and other lights came on .

  You should have an electronic dash.  Can you read the mileage or anything.  Did you jump the car prior to replacing the battery?

Jan 11, 2009 | 2001 BMW 325

1 Answer

Dash guages not working

check the cluster fuse inside the car its abbreviated most likely as like clstr or clsr if you just unplug the battery it will reset the computer..

Oct 28, 2008 | 2001 GMC Yukon XL

Not finding what you are looking for?
1995 Nissan Pathfinder Logo

Related Topics:

64 people viewed this question

Ask a Question

Usually answered in minutes!

Top Nissan Experts


Level 3 Expert

80531 Answers

Phil Lovisek
Phil Lovisek

Level 3 Expert

726 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers

Are you a Nissan Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides