Question about 1996 Ford Taurus

1 Answer

How to replace bulb on rear turn signal of 1996 taurus

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 62 Answers

Open your trunk ,next remove the inside trunk trim panel (on the side your lights out ) next there should be four retaining nuts on the back side of the light, remove the nuts, next pull out on the light assemble now twist out the light socket on the light that"s not working pull the bulb out of the socket and replace with new bulb , reverse the removal steps to reinstall

Posted on Dec 29, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Front right turn signal flashes fast left side does not


when turn signal blink faster means there a bulb burn front or rear of car

Oct 11, 2014 | 1996 Pontiac Grand Am

1 Answer

TURN SIGNALS


Hi

Did you check the fuses for the turn lights? Do the
parking lights work? If the parking lights work then you probably have a
problem either in the switch or in turn signal module thing.
The burned out bulb is what might be causing it not to blink... if one bulb is burned out you gotta replace it, make no difference if front or back,the left blinker will not work if the left front or rear bulb is bad.
same with the right side. if the front right or rear right turn signal
light is burned out it will not work.....get replacing the bulbs.Hope this solves your problem.Please rate me if my solution helped you.

Regards,
bonefirediv.
slide_cars_trucks.jpg

Apr 12, 2014 | 1988 Ford Taurus

5 Answers

2000 taurus left turn signal flashes rapidly and the left rear turn signal lamp does not work. Does ford have burned out bulb sense circuit that would give this indication? The right side flashes normally.


Yes - the fast flashing is a warning that a bulb is burned out. Change the bulb (be careful to put it in the same as the old one as it probably is 2 bulbs in one , parking and turn/stop) and you should be fine.

Jul 08, 2011 | 2000 Ford Taurus

1 Answer

How to change a front turn light in a 1996 taurus.


Lamps, Parking Front Lamp-Lamp Assembly, Taurus
Removal and Installation
  1. Remove Headlamp (13008) as outlined.
Headlamp Assembly
Removal and Installation
  1. ani_caut.gif WARNING: THE REPLACEABLE HALOGEN HEADLAMP BULB CONTAINS GAS UNDER PRESSURE. THE HALOGEN HEADLAMP BULB MAY SHATTER IF THE GLASS ENVELOPE IS SCRATCHED OR THE HALOGEN HEADLAMP BULB IS DROPPED. HANDLE HALOGEN HEADLAMP BULB CAREFULLY. GRASP HALOGEN HEADLAMP BULB ONLY BY ITS PLASTIC BASE. AVOID TOUCHING GLASS ENVELOPE. KEEP HALOGEN HEADLAMP BULB OUT OF REACH OF CHILDREN.
    Position headlamp switch (11654) and headlamp time delay switch (13736) in the OFF position.
  1. Remove two bolts retaining headlamp (13008) to upper support assembly and loosen pinch bolt. Remove headlamp assembly from vehicle.
  1. Remove park lamp bulb and socket (Sable only) and headlamp bulb and socket from Headlamp Assembly as outlined.


    Headlamp Assembly (Taurus Shown, Sable Similar)


    k24744a.gif
  1. Turn lamp socket and wiring (13410) assembly 1/2 turn counterclockwise and remove from parking lamp (13200) housing.
  1. Remove screw from park/turn signal housing.
  1. Using 1/4 inch drive socket extension and swivel, insert tool through two access holes in upper radiator support. Remove screws from park/turn signal housing.
  1. Remove parking lamp from vehicle.
  1. To install, reverse Removal procedure.


    Front Lamp-Lamp Assembly, Taurus


    k23818a.gif

Nov 19, 2010 | Ford Taurus Cars & Trucks

1 Answer

I got a 2002 ford taurus and when i go to turn my headlights on the interior light dont work and the blinkers light up but they do blink when im turning, i was what it could be thats causing that thank...


Many turn signal lamps will have multiple bulbs in them. If "one" of the bulbs is faulty, the interior lamp or lamps will come on, indicating a bad bulb. You will need to turn on your left blinker and view the bulb and make sure all bulbs appear to be blinking on front and rear of the car, then repeat with the right blinker. If you find one that doesn't appear to look right or blinks faster slower or dimmer, then replace the bulbs in that turn signal. The interior light may begin working properly when you replace the "shorted" bulb for the turn signals. If it does not, check the fuses to make sure the "shorted" bulb didn't damage your fuse for the interior lights.

Jul 01, 2010 | 2002 Ford Taurus

1 Answer

1998 ford taurus left turn signal blinking fast


Replace the bulb that stays on and doesn't blink, if that doesn't solve the problem, let me know.

Apr 13, 2009 | 1999 Ford Taurus

1 Answer

Replacing rear rturn signal bulbs


You will have to remove your trunks carpeting, then you will see your turn signal hiding back there.

Nov 09, 2008 | 2003 Ford Taurus

1 Answer

No turn signals no power windows or brake lights


Which switches on the steering column? Hope the switches were replaced with the battery disconnected. That alone could be the problem. Who did the switch replacement? If it was a business, you need to return to them and demand they do the work properly.

The turn signals and the emergency flasher are controled by one electronic flasher unit at the far left under the dash on the driver's side. It has a three wire connector and is attached to a mounting bracket with one screw.

Sep 09, 2008 | 1996 Ford Taurus

Not finding what you are looking for?
1996 Ford Taurus Logo

105 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

75005 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

fordexpert

Level 3 Expert

5470 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...