Question about 1989 Buick LeSabre

1 Answer

1989 buick lasbre blower fan quit replaced it the new one lasted a day now quit wat else could be the issue like relay or resister problems thank you

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Sergeant:

    An expert that has over 500 points.

  • Expert
  • 257 Answers

I have found three other components, The blower motor resistor which is directly below the windshield and is held in by three 7mm bolts and the 4 wire connector that plugs into it; the relay which is a black box to the passenger side of the car; and the switch on the dash. They are al $6 to $20 parts. and I would start in the same order

Posted on Jan 14, 2011

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

1992 chevy C1500: Heat works on low speed, no medium, and high only works intermittantly.


On any other vehicle it sounds like the blower fan switch.
The fan switch provides power or ground to the resistor and there would be a high speed blower relay to bypass the resistor.
But in your case the fan switch is part of the controller.
I don't have a diagram for a 92 but the 94 model shows relays for low medium and high speeds. Each relay gets power from a fuseable link. The high relay gets power thru the low relay if the low relay is not engaged.
If you have the model with 3 relays you may need to check them.

Feb 01, 2013 | 1992 Chevrolet C1500

1 Answer

Heater fan stopped working


The fan will not quit completely if it is the resister, Did you check if a fuse is Blowin? Or the relay is defective, The blower motor could be shot , They don,t last for ever,. If resister is bad one of the speeds for the fan mostly quits working,

Nov 29, 2012 | 2003 Subaru Forester

1 Answer

Location of the blower motor relay on 1989 buick reatta


There is no relay.....there is a motor controller. located in the duct work, on the firewall, passanger side. it has two connectors and 3 screws that hold it into the ductwork. Common problem is the fan will not shut off when the ignition is turned off.

Mar 08, 2012 | 1989 Buick Reatta

1 Answer

2005 gmc sierra heater fan quit working. I lost the fifth speed months ago and a couple of days ago lost the other four, the first day the fan would come on sometimes while driving then quit after a while...


1-4 speed are the blower motor resister . It controls all 1-4 speeds, also it's under the passanger side dash around fan, the 5th speed runs off a fuse the is located in the fuse box. It's one of those square fuses , not the relays but fuses. The resister will run $15 and fuse $5 . Good luck. I have replace these before

Jan 03, 2011 | 2003 GMC Sierra 1500

1 Answer

2000 Buick Century. Blower quit working for


I had the same problem. It turned out to be the ignition switch. i have no idea how that is connected to the fan but... it worked, got me my fan speeds back, although it is not working again...

Jul 16, 2010 | 2000 Buick Century

1 Answer

1989 Buick Park Ave heating problems. I got this car a few months ago and it was great,...now having problems. The heating/AC control unit works fine, there was however a toggle switch controling the...


check to see if there is a resistor on the blower motor. it should be located either beside or underneath the blower motor.. if that is bad it wont let you select different fan speed settings and if it goes completely out the blower will not work at all.

Feb 12, 2010 | 1989 Buick Park Avenue

2 Answers

Blower fan resistor module replaced, worked for 2 days quit again


HIGH RESISTANCE IN THE BLOWER MOTOR CAN CAUSE YOUR PROBLEM, OR A BAD RESISTOR.
THERE IS NO REAL GOOD WAY TO CHECK THE RESISTANCE OF THE BLOWER MOTOR.

Jul 16, 2009 | 2005 Chevrolet Malibu

1 Answer

Heater/defrost/ac fan not coming on park avenue...can hear click


Check the connector to the blower motor. Turn it on and wiggle the connector.

Jan 10, 2009 | 1989 Buick LeSabre

1 Answer

06 buick lesabre a/c problem


sounds to me like blower motor bad not switch controls or blower resister need more info?

Aug 26, 2008 | 2006 Buick LeSabre

Not finding what you are looking for?
Cars & Trucks Logo

59 people viewed this question

Ask a Question

Usually answered in minutes!

Top Buick Experts

yadayada
yadayada

Level 3 Expert

75005 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7710 Answers

Are you a Buick Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...