Question about 2005 Dodge Ram 2500 Truck
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
I'm sending your wiring diagram for your 1999 Dodge Ram 3500 it's a complete anti-lock brake circuit that includes a stop light switch.
Posted on Oct 04, 2009
The Heater core is difficult to replace on the RAM since it is buried in the plenum box. The box has a convenient door panel that you can open to remove and replace the core. The catch is that the convenient door is on the back of the box and you have to remove the heater box to get to it. This involves removing the steering wheel, steering column, complete dash panel, evacuating the AC, draining the radiator, and finally removing the heater box. Once you have the box out(8-12hrs), the core is simple to replace.
You want to be sure that the core is the problem before you undertake this process. If there is a strong smell of antifreeze in the cab or a puddle of coolant on the passenger side floor, the diagnosis is easy.
Check that the radiator is full, not the overflow tank, the radiator. On a cold engine you can remove the radiator cap and check the level. It should be full. If there is air in the system it will affect cab heating and engine cooling.
Another good check is to feel the two heater hoses going into the firewall from a cold start. The hoses should warm up at about the same rate and get uncomfortably hot-close to radiator temperature.
If the core appears to be OK, the next concern is with the blend doors that divert air through the heater core. This is a common failure on the RAM. Check heatertreater.net for an explanation of the operation of the system and a fix for the common problems. The RAM has four different DC servo motor controlled air flow doors that are susceptible to failure and all of these need to be checked by either observing the symptoms of failure or reading the codes. The problems are easy to fix with the HeaterTreater kits, but the OEM dealer fix requires removing the plenum box as described above. It is a costly repair if you take it back to the dealer and are not under warranty.
Posted on Oct 10, 2009
it doesn't have a fuel pump relay it has a fuel pump control unit and it is located on the chassis back quarter drivers side near the tube cross member for chassis on top of chassis rail near bed mount. locate the rear springs front perch and it will be above that on top of rail.
hope this helps. good luck and please ask any question you have.
Posted on Oct 25, 2009
Testimonial: "Thanx for info..no wonder I couldn't find Relay! "
Tips for a great answer:
Mar 07, 2015 | 2005 Dodge Ram 3500
Jul 23, 2014 | 2005 Dodge Ram 3500
Jun 19, 2014 | 2005 Dodge Ram 3500
Sep 29, 2011 | 2005 Dodge Ram 3500
Aug 11, 2010 | 2005 Dodge Ram 3500
Jul 17, 2010 | 2005 Dodge Ram 3500
May 05, 2010 | 2001 Dodge Ram 3500 Truck
Apr 21, 2010 | 1999 Dodge Intrepid
268 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: