Question about 1988 Ford Ranger

1 Answer

Clutch wont allow me to shift gears while driving changed everything new pressure plate throw out bearing the works bleed it several times

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Renaissance:

    An user who is expert in 3 categories / brands.

  • Ford Master
  • 1,949 Answers

Pump the blank out of it....i have had to pump one of these new clutchs 100or more times to get it to bleed right...and yes i am saying just sit there and pump the clutch so what do you have to loose besides a couple of pounds....have a happy new year

Posted on Dec 31, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I just finished putting on a new gear box and clutch kit for and when i started it and put it on gear it was so low and soft and a loud noise after that... I just want to know why did it do that pls?


So you installed a new transmission and a whole new clutch kit? Did the kit include the pressure plate, clutch, throw out bearing and slave cylinder? Did you bleed the slave cylinder? The low and soft pedal is a clear sign that there is air in the hydraulic system. The loud noise after that tells me you're either grinding the gear trying to shift or there is a problem inside the transmission itself. If you installed everything correctly and torqued all the bolts correctly in the clutch assembly and transmission, then try bleeding the slave cylinder again, sometimes air gets trapped in the cylinder and it's hard to get out, If you let the clutch master cylinder run dry while you either had the clutch apart or while you were bleeding the clutch, then you have to start from scratch and re-bleed the whole system.

Sep 19, 2016 | Cars & Trucks

1 Answer

Stick shift car wont go into gears


did you replace the clutch pressure plate and throw out bearings?

Mar 27, 2014 | 1996 Toyota Tercel

2 Answers

Clutch noise


It's time to change the clutch with entire kit. Release bearing, pilot bearing, clutch plate, pressure plate and get flywheel turned. If that bearing flies apart inside your transmission it will leave you stranded and your release fork will be destroyed possibly causing more damage to the transmission housing. It is hydraulic and if the master cylinder is working properly you're not likely to notice any play in the pedal due to release bearing.

Oct 03, 2013 | 1990 Honda Accord

1 Answer

Clutch not engaging


Well, it would shift easily with engine off, because the transmission input shaft is not turning. Engine running and clutch engaging good, the input shaft would again be stationary and allow smooth shifting.
What you have to determine is if the clutch disc or pressure plate is bad (a new clutch is needed), or if the pedal hydraulic system has a malfunction. When you push the pedal down, a rod from the top of pedal pushes into the clutch master cylinder bolted to the firewall under the hood. This cylinder has a reservoir filled with brake fluid. When the rod forces fluid from the clutch master down a steel line and into the clutch slave cylinder down on the transmission bell housing, the hydraulic pressure forces a plunger from the slave cylinder to extend and push the clutch fork lever a small amount, enough to force the clutch release bearing (aka throw-out bearing) against the pressure plate. This relieves pressure on the clutch disc and input shaft becomes stationary for easy shifting.

Jul 26, 2013 | 2000 Chevrolet Blazer

1 Answer

1987 saab 9000 turbo transmission


bad pressure plate or stuck throw out bearing.

Jun 06, 2012 | Saab 9000 Cars & Trucks

2 Answers

Problems shifting, clutch feels fine.


Most likely the master cylinder. Both usually need replaced together. If one fails the other will most likely soon after. Then bleed system again.

May 23, 2010 | 1997 Mazda MX-6

1 Answer

New clutch not working properly really could use some help


My best guess on this, assuming that the clutch master is working and it has no air remaining in the system is that you either have the wrong throwout bearing in there or that it is installed incorrectly. Also, rare but can happen is that if the pressure plate assembly is a rebuilt one, the face has been cut too far and clearances are off.
Obviously, check everything external before taking it apart again, but that's where I think you will need to go.

Nov 18, 2009 | 1991 Toyota Pickup

2 Answers

Clutch slipping when it get hot


Check the adjustment of the clutch push rod. It is the rod that connects the clutch pedal to the clutch master cylinder.

Dec 22, 2008 | 1992 Isuzu Amigo

1 Answer

Clutch wont work


Probably air in the clutch hydraulic system. Did you bleed it? What fluid did you use?

Dec 14, 2008 | 1994 Ford F150 Styleside Supercab

Not finding what you are looking for?
Cars & Trucks Logo

118 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

fordexpert

Level 3 Expert

5501 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...