Question about 2001 Ford Crown Victoria

1 Answer

Power mirrors not working, have tried moving them manually (2001 Ford Crown Victoria). Both sides only goes down, not up.

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 62 Answers

If the mirrors only move down and not up I would suspect the mirror switch , the mirrors use one motor to move the glass up and down,and another motor to move them in or out , and if the mirrors move down the motors are working.the only other possible problem would be a wiring but highly unlikely due to the fact that the turning the motors in a different direction is done by switching the polarity to the motor which requires both wires to be good to make the motors move in the down direction ..check the mirror switch I am sure you"ll find that"s your problem

Posted on Dec 29, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Power distribution box diagram 2001 ford crown victoria


Go to this free Ford website to view or download the owners manual for this vehicle. The power distribution box diagram is on page 160.
https://www.fleet.ford.com/maintenance/owners_manuals/default.asp

Apr 17, 2012 | 2001 Ford Crown Victoria

1 Answer

1997 Ford Crown Victoria with 197,000 miles. Power windows: The rear passenger window will go down, but will no longer go up.


the switch is shorted, if it moves in one direction but not the other, its the switch , since all the switch does is reverse the power supplied to it,, the up side of the switch is bad, replace it

Sep 09, 2011 | 1997 Ford Crown Victoria

1 Answer

Crown victoria Climate control is stuck on heat


ned to remove the radio and look at the blend door actuator on top of the hvac box. the actuator goes bad and doesn't move the door from hot to cold. if you see the actuator moving but still no cold air then the blend door could be broken.

Aug 01, 2011 | 2001 Ford Crown Victoria

1 Answer

2001 crown victoria, fuel pump fuse-----where is it located


Try looking under the hood on the driver side relay panel. If not there, check the passenger side fuse box.

Aug 14, 2010 | 2001 Ford Crown Victoria

1 Answer

1994 Ford Crown Victoria power front window will not go up or down but I can still hear the motor


if it sounds kind of grinding the regulator is bad, it is cable driven and
whenit goes bad the window wont move but the motor still runs

Aug 06, 2010 | 1994 Ford Crown Victoria

1 Answer

Power mirrors not working


They get stuck if you have not used them for a while, so try and move the mirror manually to loosen it up and then try again.

Apr 07, 2010 | 2001 Ford Crown Victoria

1 Answer

Elictric mirrors don't work


both mirrors not working usually means a bad fuse or mirror switch.

Nov 06, 2009 | 2001 Ford Crown Victoria

1 Answer

Side Mirrors will adjust side to side but not up and down.


There are two tiny motors in each mirror. one for up/down. One for side to side. They have jack screws (plastic) that fit into the motors.

You can manually put your hands on either side of the mirror and force adjust it. If you hear a ratcheting sound, the jack screws are OK. Then repeat with hands on top and bottom.

If you hear ratcheting and mirror stays where you stop it, that means one of the motors is bad. The motor assembly is available as a separate part.

-------------------------------------------------------------------------------------
Mirror Motor—Crown Victoria, Grand Marquis
Removal and Installation
  1. Disconnect battery ground cable. Refer to Section 14-01 .
  1. Remove outside Rear View Mirror Glass as outlined.
  1. Remove Outside Rear View Mirror as outlined.
  1. Remove two screws from outside rear view mirror motor.
  1. Remove outside rear view mirror housing from outside rear view mirror base.
  1. Disconnect connector and remove outside rear view mirror motor from mirror housing.
  1. To install, reverse Removal procedure.
1a865db.gif
Might be cheaper to buy used irror at car-part.com. Look for * to find page with cheapest part. Or, EBay. Good luck

Aug 11, 2008 | 1996 Ford Crown Victoria

Not finding what you are looking for?
2001 Ford Crown Victoria Logo

417 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

76051 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

fordexpert

Level 3 Expert

5516 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...