Question about Dodge Ram 1500

1 Answer

I need to replace the Bank 1 O2 Sensor on a 1997 Dodge Ram 1500 w/ a 5.9l 2 wheel drive. The rep at the auto parts store said it is on the drivers side near the manifold. "?" Another said it is right after the 4 pipes merge into 1 on the drivers side. "?" Help cause i dont see one in either place...

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Dodge Master
  • 5,763 Answers

Okay, bank 1 is the driverside, you need to know bank 1 but what sensor? theres bank 1 sensor 1 and then bank 1 sensor 2, sensor 1 is before the cat and sensor 2 is after the cat, then the last sensor on that truck would be bank2 sensor 1 this one is on the pass/side before the cat,heres a picture to help, the bank 1 sensor two goes in rear of converter, the other two are on the manifolds, the sensor you need is on the driverside manifold,hope this helps.I need to replace the - johnjohn2_45.jpgjohnjohn2_46.jpg

Posted on Dec 29, 2010

  • Johnny    Brown
    Johnny Brown Dec 29, 2010

    the front o2 sensors go infront of the converter

×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get to try the service completely Free afterwhich it costs $6 per call and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Bank1 sendor 1 02 sensor-where is it?


bank 1 means before convertor on manifold usually ! has to be cold when doing it and very careful not to break it when removing or installing. its done with a socket but some have special plugs so be carefull don't drop sensor. some have 2 or 3. o2 sensors. before replacing look for loose vaccum lines and if you don't find any then replace it. some times you can get a false reading and the fix will be something different.

May 22, 2014 | 2004 Dodge Ram 1500

1 Answer

I had a P0138 code after a diagnostics test on my 2006 dodge ram 1500 4X4, what does this mean?


P0138 DODGE - O2 sensor 1/2 Circuit highxicon.jpghttp://engine-codes.com/p0138_dodge.htmlForum CodePossible causes- Rear Heated Oxygen Sensor Bank 1 harness is open or shorted
- Rear Heated Oxygen Sensor Bank 1 circuit poor electrical connection
- Faulty Rear Heated Oxygen Sensor Bank 1
- Inappropriate fuel pressure
- Faulty fuel injectors
- Intake air leaks may be faulty
- Exhaust gas leaks Tech notes Replacing the rear O2 Sensor bank 1 usually takes care of the problem.

Jul 09, 2012 | 2006 Dodge Ram 1500

1 Answer

WHERE IS O2 SENSOR BANK 1 SENSOR 1 ON 2000 DODGE CARAVAN V6 3.0 LITERS AND DOES IT HAVE A MORE THAN ONE SENSOR FOR BANK ONE AND IF SO WHERE IS THE ETHER SENSOR AT?


Bank 1 would be the side of the engine that is normally the driver's side if the vehicle is a rear wheel drive. So find the belt end of your engine and bank 1 is on your right. Sensor 1 is before the cat and sensor 2 is after the cat.

Jul 03, 2012 | 2000 Dodge Caravan

1 Answer

Which o2 sensor is the cylinder bank no.1, sensor no. 2 on a 1999 Dodge Ram


Bank 1 is the row of cylinders on the driver side of your truck and sensor #2 is the one after the catalytic converter, closer to the back of the vehicle than the engine

Jun 02, 2011 | 1998 Dodge Ram 1500 4WD

1 Answer

I need to know where the O2 sensor Bank2 position 1 on a 1997 3.3 interpid.


O2 sensor locations break down like this.

The bank refers to which side of the motor. Bank 1 is always the same side of the motor as cylinder number 1. Bank 2 is the other side of the motor.

Sensor refers to before or after the catalytic converter. Sensor 1 is always before the cat and sensor 2 is always after the cat.

So bank 2 Sensor 1 would be the O2 on the passenger side of the motor before the catalytic converter. You should see it threaded into the exhaust manifold.

Apr 26, 2011 | 1997 Dodge Intrepid

3 Answers

Reccieved P0141, P0147, P0340 as emission diagnostic trouble codes. What do these mean?


P0141....O2 Sensor Heater Circuit (Bank 1 Sensor 2)

P0142....O2 Sensor Circuit Malfunction (Bank 1 Sensor 3)

P0143....O2 Sensor Circuit Low Voltage (Bank 1 Sensor 3)

P0144....O2 Sensor Circuit High Voltage (Bank 1 Sensor 3)

P0145....O2 Sensor Circuit Slow Response (Bank 1 Sensor 3)

P0146....O2 Sensor Circuit No Activity Detected (Bank 1 Sensor 3)

P0147....O2 Sensor Heater Circuit (Bank 1 Sensor 3)

P0340....Camshaft Position Sensor 'A' Circuit (Bank 1 or Single Sensor)

Sep 20, 2010 | 1997 GMC Sierra

1 Answer

Which side is bank 1 in dodge durango 2000 4.7 the driver side or passenger side


I assume bank 1 is the o2 sensors before the cat & bank 2 is after the cat. The various auto parts stores
are giving me conflicting info as one store says bank 1 is the left cat and bank 2 is the right cat.

Jun 10, 2010 | 2000 Dodge Durango

1 Answer

O2 sensor location 1997 pontiac grand am 2.4 4 cyl auto trans


BANK 1 SENSOR 1 IS THE ONE IN THE EXHAUST MANIFOLD. BANK 2 SENSOR 2 IS BELOW THE CATALYTIC CONVERTER.

P0171 SHOULD GO AWAY WITH A GOOD O2 SENSOR BUT DO CHECK FOR VACUUM LEAKS TO BE SURE. 3.1/3.4L ENGINES HAVE A BAD DESIGN INTAKE MANIFOLD GASKET, THE LEAK OIL, COOLANT, AND AIR.

Jul 13, 2009 | 1997 Pontiac Grand Am

2 Answers

2005 Dodge Magnum error code...


Your heated O2 sensor has a heeater problem most likely. Most likely time to change out your HO2 sensor. Most cars actually have only primary heated. Not sure for this application but would thus assume the primary sensor or otherwise known as precat O2.
With a sensor high you have high voltage back to the pcm thus most likely shorted heating element.

There is an outside chance of a cross short to the ground circuit of your O2 sensor. If after replacing your sensor you still have a problem then start looking for this.

I see you went to the auto parts store and got an HO2 sensor (Should be a 22mm or 7/8" -- same size) and replace the Primary and if that do not solve the problem, then see if you have a heated postcat HO2 if not then see above.

Good luck and hope this helps, oh and Bank 1 is where your #1 cylinder is.

May 13, 2009 | 2006 Dodge Magnum

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

2,279 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

76630 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8499 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...