Question about 2000 Buick LeSabre

Open Question

2000 Buick LeSabre LTD; Driver Information Center readout is malfunctioning. Sometimes it reads normal, but most of the time readout is gibberishe -- just symbols or letters / numbers that are meaningless.

Posted by on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017

Ad
erietrack
  • 37 Answers

SOURCE: 2000 Buick LeSabre Struts

Yes there are struts on the front and shocks on the back. 2 of each. They are around $50-100 for the fronts. $30-100 for the rears depending if the car has air ride or not.

Posted on Nov 08, 2008

Ad
  • 180 Answers

SOURCE: I have a 92 buick

You have a bulb on that side that is burnt out the bright side.

Posted on Jan 09, 2009

ButtFuzz
  • 463 Answers

SOURCE: PCV location on a 2000 buick lesabre

Open hood, top left side between the valve covers. There is a "funky" plastic housing that turns counter-clockwise (less than 1 inch of travel). then pull straight up to reveal the "missing" pcv valve.

Posted on Mar 05, 2009

  • 106 Answers

SOURCE: 2000 buick lesabre - water pump replacement

first disconnect the battery then check how the serpentine belt is lined up so u can take it off and put back on. Then the pump should be on the side of the motor with 9or12 bolts there could be more! after taking out take razorblad and skrap the old gasket clean wipe of then put new gasket and pump back on dont over tighten the screws cuase the pump my be aluminum.

Posted on Mar 19, 2009

bozcro
  • 867 Answers

SOURCE: 2000 Buick LeSabre heater only blows cold

the climate control thermostat is not opening the valve to let the warm coolant in

Posted on Nov 29, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My Park, neutral, reverse, drive display is not lighting up on my 2000 buick lesabre ....neither is my onboard readout where and how do I find the bulb, all other interior lights are working


Unfortunately, the bulbs are not easily replaced, they are soldered onto the instrument cluster.
The only way I know of to do this yourself is to remove the instrument cluster, desolder the bad bulbs and then solder new ones in.

Another option is to remove it, send it out for repair or replacement.

Aug 07, 2011 | 2000 Buick LeSabre

Tip

Buick service light 1991-01


LeSabre,
Park Avenue


2000-01

Turn the ignition to ON. Press the GAUGE INFO button on the driver information center (DIC) switch to view OIL LIFE INDEX. Press and hold the RESET button on the DIC until the display reads OIL LIFE INDEX 100% NORMAL. The engine oil life monitor is now reset. Turn the ignition OFF.



Park Avenue


1997-99

When "OIL LIFE INDEX CHANGE OIL" appears in the Driver Information Center, press and hold the "RESET" button while the oil life index is being displayed. After 5 seconds, the oil life will change to 100%



Le Sabre,
Park Avenue


1995-99
1995-96

When "CHANGE OIL SOON" light is illuminated, access the reset button in the glove box. With the engine off and the ignition switch in the run position, press and hold the button for at least 5 seconds. The light will flash four times and then go out.



Century,
Regal,
Roadmaster


1997-01,
1996-01,
1995-96.

To reset the "CHANGE OIL" light, turn the ignition switch to the run position with the engine off. Fully depress and release the accelerator pedal three times within 5 seconds. The light will flash twice and go out.



Roadmaster


1994

To reset the "CHANGE OIL" light, turn the ignition switch to the run position with the engine off. Access the reset button on the end of the instrument panel by the fuse block. Press the switch and hold it for at least 5 seconds.



Le Sabre,
Park Avenue


1992-94,
1991-94

When "CHANGE OIL SOON" light is illuminated, find the hole in the underside of the dash on the passenger side near the door. Insert a blunt instrument into the hole and press the switch. The light will flash four times when the system is reset.











on Dec 07, 2009 | Buick LeSabre Cars & Trucks

1 Answer

How do I fix the drivers side front seat heater on a 2000 Buick Lesabre LTD? It appears to be the heating unit and not the switch.


Hello: It would be best to replace it, We fixed (per GM Instructions) but they didn't stay fixed so that's why I recommend replacing it. To replace it you have to remove the outer cover on the seat cushion. Bottom.

Feb 14, 2011 | 2000 Buick LeSabre

2 Answers

How to reset oil change light


Hello javjr.
Here is what it says in the owners manual.
  1. Turn the ignition to "ON".
  2. Press the GAGE INFO button on the Driver Information Center (DIC) switch to view OIL LIFE INDEX.
  3. Press and hold the D.I.C. RESET button until the display reads ENGINE OIL INDEX 100% NORMAL. The engine oil life monitor is now reset.
  4. Turn the ignition "OFF".
There you are, thank you for using FixYA.

KL

Jan 18, 2011 | 2000 Buick LeSabre

2 Answers

Back end of buick lasabre sits high. not leveling out


The auto adjustment control has malfunctioned. Shouldnt be too expensive to get fixed though.

Apr 05, 2010 | 2000 Buick LeSabre

1 Answer

Automatic climate control went to celcius (C) instead of (F) How do we get it back?


use driver information center button ENG/MET: Use this button to change the display
between English and metric units.
dic buttons are onleft hand side of dash closest to steering wheel.
Cheers!

Feb 14, 2010 | 2000 Buick LeSabre

2 Answers

2000 Buick LeSabre heater only blows cold


the climate control thermostat is not opening the valve to let the warm coolant in

Nov 29, 2009 | 2000 Buick LeSabre

3 Answers

2000 Buick Lesbre - Intermittant electrical: Door


THE PROBLEM SOUNDS LIKE LOOSE WIRING CONECTIONS IN THE DRIVERS DOOR , BEST THING TO DO IS HAVE A LOOK OPEN UP DOOR PANEL AND CHECK ALL CONECTIONS, GOOD LUCK

Oct 22, 2009 | 2000 Buick LeSabre

1 Answer

DIC works part of the time


Per your description, it sounds as though your DIC's IC has gone to lunch. Remove and verify power and ground is good, if it checks OK, replace the DIC.
Good luck, let me know.
Regards,

Mar 07, 2009 | 2000 Buick LeSabre

2 Answers

2000 buick lesabre 3800 has warm air blowing out two driver side vents in A/C mode, but the two passenger side vents are blowing cold. any suggestions?


I had same problem on 2000 Lesabre blowing cold on passenger and warm on driver. I fixed it by adding more freon even though it had 28 pounds of preasure. Now it works great!

Jul 30, 2008 | 2001 Buick LeSabre

Not finding what you are looking for?
2000 Buick LeSabre Logo

Related Topics:

262 people viewed this question

Ask a Question

Usually answered in minutes!

Top Buick Experts

yadayada
yadayada

Level 3 Expert

78257 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6927 Answers

Are you a Buick Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...