Question about 2004 Dodge Caravan

1 Answer

My engine light came on i felt a little shift when i took off no other real problem i was told that it could be po700 trans control system malfuntion and also p1776 manufacture control

Posted by Anonymous on


1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.


    An expert whose answer got voted for 500 times.

  • Master
  • 1,102 Answers

You need to get the code(s) read to be sure what it is. Take it to a shop that you trust and they will hook it up to a code scanner and tell you exactly what code(s) there are. From there you can plan your repairs.

Posted on Dec 29, 2010


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

1997 getting code P1776 & PO700 What does this mean

The code 700 is a notice that there is a problem with the trans control module, and code 1776 could be a problem with the low-reverse solenoid inside the trans. Code 1776 can trigger the code 700.
The solenoid would need to be tested.

Sep 03, 2012 | 1997 Plymouth Grand Voyager

2 Answers

PO700 PO740, check engine light on. Run a test on

PO700 is a code telling you there are codes in the TCM of some late model cars where the Transmission control module has lost connection to the PCM the vehicals main computer , And basically it happens when the TCM has a issue within itself or the transmission that sets a code and it sends a request for the PCM to illuminate the SES or CHECK engine light.
PO740 is a chrystler specific code that involves your Tourqe Converter Clutch Circuit (specifically The TCC solenoid) this code if not repaired quickly could cause major transmission problems....slipping out of gear....not shifting from first to second properly and just all around trans problems...eventually leading to no shifting at all...I highly recommend fixing it soon.

Feb 22, 2010 | 2001 Dodge Caravan

1 Answer

I have a 1997 dodge grand caravan, while driving on the highway the rpm's jump way up and there is no power, service engine light comes on. pulled over shut the van off and waited approx. 10 min restarted...

code po700 is to tell the ecm and you there is a trans.problem and dtc set in trans.module. po755 is a trans. shift solenoid problem. check trans.fluid level when hot and color of fluid ,dark is not good,burnt smell not good .chrysler has a large trans.problem need to visit a trans. shop for repairs.hope this helps.

Oct 29, 2009 | 1997 Dodge Caravan

1 Answer

2000 Stratus will not shift out of second

Indications are that the transmission has some serious issues. You may want to call a reputable local transmission shop and explain the situation, including the codes. They can give you your options. But I suspect you need the transmission rebuilt or replaced.

Apr 27, 2017 | 2002 Dodge Stratus

2 Answers

Won't shift into high gear

po700 is the code in the pcm,telling you there is a code in the tcm( trans control module) po605 is a internal tcm error replace and program the trans control module

Sep 01, 2009 | 2002 Chrysler Town & Country

2 Answers

2002 daewoo leganza there is a po700 code and check engine light stays on.

I have a code book and in the generic section it says transmission control system malfuntion. that might not be it but you could start checking that area.

Jun 07, 2009 | 2002 Daewoo Leganza

1 Answer

Po605 and po700

p0700 is a generic trans. code, so the problem if it is in the trans. would require further trans diag. so i would scan trans specific codes first. but in most cases when a chrysler tells you it is an internal controller fault you can believe it. just make sure which controller it is telling you has a fault!

May 18, 2009 | 1999 Dodge Caravan

1 Answer

02 Saturn SL1

Replacing plugs and wires is the correct soultion for a p0341 on an S-car. However the trans shifting hard is another common problem that the s-cars have which is your valve body on your transmission and the Input shaft nut will eventually need to be replaced as the problem will get worse. as far as the Ignition module. It is actually called an Ignition Control Module. Maybe they were saying controller and referring to that. I hope this helps.

May 17, 2009 | 2002 Saturn Sl

1 Answer

Trns shift problem

On chrysler product vehicles that use the electrical solonoids inside the trans oil pan can usually just be removed and cleaned and they will usually function correctly again. They have a tendency to get laquered up and stick if the trans fluid has not been serviced regurarly. This happenes from the neon all the way up to the dodge 3/4 ton pickups with the gasoline engines.

May 04, 2009 | 2003 Dodge Neon

1 Answer


sounds like the intake hose from throttle body is not on intake manifold for the p0700 trouble code,you need trans controller scanned for fault codes..let me know what codes are in trans controller

Mar 15, 2009 | 2002 Dodge Neon

Not finding what you are looking for?
2004 Dodge Caravan Logo

187 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts


Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6918 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides