Question about 2004 GMC Envoy
I think you will find that post 90s vehicles have bearings sealed in hub units which are replaced. take a look on youtube and there will be someone you can watch doing this procedure, it is not a job for the first timer, but is much easier than replacing bearings the old way. parts can be had at any parts store or eBay. you can get a service manual with detailing, steps, and photos for about 10 bucks on eBay. better take a long look before you start it on your own.
Posted on Dec 29, 2010
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
The battery is on the right side behind the fuse box. You need a metric set to undo the 3 screws. Theres one that attaches to the body, one to the bar that goes along the top, and theres one on the left side below the vacuum hose and air induction. After you've taken out those three, you should lift the whole thing out(battery and shroud) together. It's hard to take the shroud off before you lift the battery out. After that, you have to pry the shoud off the battery. The two terminals in the back make it hard. Then just go to any auto parts store and they'll give you a new one.
Posted on Jan 28, 2009
THE RACES FOR THE BEARINGS ARE PRESSED INTO THE HUB. YOU CAN USE A CHISEL TO REMOVE THE OLD ONE AND A SOFT DRIFT TO TAP THE NEW ONE IN PLACE.
Posted on Mar 12, 2009
SOURCE: ABS light won't go off
Any chance you damaged or moved wheel speed sensor, or got grease or something on it? I'd check that & make sure, (compare to opposite side) it's clean & spaced same from wheel as other.
Posted on Jul 26, 2009
definitely clean the throttle body. I just had that same problem myself. Replaced battery and the truck would die with the air compressor on. I was told that the throttle body needed cleaned out...and sure enough, when i took it off; boy was it carboned up!! have to clean it really well with either carburetor cleaner or brake parts cleaner....oh yeah, and a toothbrush..and I was also told that the truck had to relearn the idle position after doing all that. so you drive it around for about 10-15 minutes and come back home...turn it off...then restart the truck...and it should be fine after that.
Posted on Dec 11, 2011
Tips for a great answer:
May 09, 2016 | 2007 GMC Envoy Denali
Jun 17, 2014 | 2004 GMC Envoy
Jul 25, 2012 | 2004 GMC Envoy
Dec 05, 2010 | 2004 GMC Envoy
Jul 12, 2010 | 2005 GMC Envoy
Jan 14, 2009 | 2002 GMC Envoy
190 people viewed this question
Usually answered in minutes!