Question about 2007 Land Rover Range Rover Sport Supercharged

Open Question

How to replace wing/door mirror unit on land rover discovery 3 2007

Posted by on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 149 Answers

SOURCE: land rover discovery central locking.

No, likely to be caused by the actuators in the lock mechanism failing usually causing the door to remain locked. The boor door can also fail this way, as do the front side doors. Replacement requires the whole lock unit to be replaced at a cost of roughly £60 a lock, and a hours work. Helps if you have small hands. Requires a full strip down of the door and you will need the lock unit, trim clips (a few quid) and a trim removal tool (tenner). You can bodge with a flat head screwdriver, but the tool does help prevent damage to the clips & trim panel.

Posted on Feb 22, 2010

  • 218 Answers

SOURCE: Radio in 2000 Land Rover Discovery

THERE SHOULD BE A RADIO CODE CARD WITH THE VEHICLES PAPER WORK.IF NOT U HAVE TO CALL THE DEALER FOR THE CODE.

Posted on May 15, 2009

  • 1 Answer

SOURCE: Land Rover Discovery TD5 1999. Where is the Fuel Relay Switch

In the engine fuse box under the bonnet ,relay is the closest one to the front of the vehicle ,about £7 to replkace

Posted on Jun 09, 2010

01fordeb
  • 1033 Answers

SOURCE: land rover discovery 1996 V8i engine firing order

1-8-4-3-6-5-7-2

Posted on Jun 22, 2010

  • 5 Answers

SOURCE: 2009 Land Rover Discovery and Blackberry Curve 8900

You'll have to call the dealer have them pull the VIN to see if you have the latest and greatest software. Also you can check on the land rover website under owners put in the last 8 digits of your vin number and it will tell you if the BB8900 is fully compatible.

Posted on Aug 15, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to fix a loose wing mirror freelander


If it's loose from the door, you need to remove the inner door panel to access the screws that hold the mirror in place on the door itself. To remove the inner door panel may simply involve removing some screws, but some models require a special upholstery tool to loosen the panel fron the clips. Once the panel is loose, tighten the mirror and replace the inner panel. Be cautious with door switch wiring!

Jul 05, 2014 | 2004 Land Rover FreeLander

1 Answer

How do I fit a Land Rover Discovery 3 door mirror.


Instead of trying to explain it here in detail - Download RAVE manual (attached link below) Free Download.

http://www.landroverresource.com/

Mar 07, 2011 | 2004 Land Rover Discovery

2 Answers

How yo remove doorr panel on a range rover sport hse 2006. to replace a driver side wing mirror


Most cars you don't have to remove the entire panel. the side mirror has it's own small panel. It is just clipped on. just pry it off to access the nut to remove the wing.

Jan 21, 2011 | 2006 Land Rover Range Rover Sport

1 Answer

NAS 2004 Land Rover Discovery Door locking problem.


this is actually the internal DC motor which comes inside the door latch. Land Rover doesn't sell it separately. You need to buy the whole door latch to have this problem sorted out. or else you can buy the DC motor from me as I made a special order from a factory for those DC motors as they are common fault in most of new Land rover generation. each motor costs you $30 +shipping Regards..

Jul 03, 2010 | 2004 Land Rover Discovery

1 Answer

How can I replace the complete RH wing mrror on my Range Roger P38 Vogue [2000 Model]?


if you pull the door panel you should see some nuts or bolts holding the side view mirror on there should be two or three of them. remove said nuts or bolts and be sure to disconnect the wires going to the mirror so you can remove mirror.reverse the step when reinstalling mirror. hope this helps.

Jan 06, 2010 | 2006 Land Rover Range Rover

1 Answer

Land rover discovery central locking.


No, likely to be caused by the actuators in the lock mechanism failing usually causing the door to remain locked. The boor door can also fail this way, as do the front side doors. Replacement requires the whole lock unit to be replaced at a cost of roughly £60 a lock, and a hours work. Helps if you have small hands. Requires a full strip down of the door and you will need the lock unit, trim clips (a few quid) and a trim removal tool (tenner). You can bodge with a flat head screwdriver, but the tool does help prevent damage to the clips & trim panel.

Dec 19, 2009 | 2003 Land Rover Discovery

1 Answer

2003 RANGE ROVER DRIVER DOOR PROBLEMS.


replace the driver control modul on door

Aug 27, 2009 | 2003 Land Rover Discovery

1 Answer

Passenger wing mirror replacement


On the inside trim, you can remove screws that are by the door handle, arm rest, under door and side of door and then gently pull back on the panel as there will also be retaining clips attached and you don't want to break them. You'll need to lift the door panel upwards in order to get it off the window ledge. Then you'll need to manipulate the panel and disconnect the door handle linkage from the door handle and disconnect the wiring for your controls. Then you can access the bolts that secure the mirror onto the door

Apr 30, 2009 | 1995 Land Rover Defender

1 Answer

Trying to replace driver's side mirror for 200 land rover discove


Easy. Black triange at the top front of the door. Pry away gently and you'll see 3x10mm bolts. Undo these, and the mirror will come loose. Unplug the multi-plug and remove. Job done. Oh, may be some foam packed in there too. Just pull it out and put to one side and replace after.

Apr 10, 2009 | 2000 Land Rover Discovery

Not finding what you are looking for?
2007 Land Rover Range Rover Sport Supercharged Logo

Related Topics:

449 people viewed this question

Ask a Question

Usually answered in minutes!

Top Land Rover Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

yadayada
yadayada

Level 3 Expert

74896 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7689 Answers

Are you a Land Rover Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...