Question about 1999 Ford Explorer

1 Answer

Changing headlamp, how to..diagram - 1999 Ford Explorer

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Sniper:

    An expert who has posted more than 50 answers, of which 90% or more were rated as helpful.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

  • Expert
  • 60 Answers

SECTION 417-01: Exterior Lighting 1999 Explorer/Mountaineer Workshop Manual REMOVAL AND INSTALLATION Procedure revision date: 07/27/1998 Lamp Assembly-Headlamp (Explorer) Removal

  1. NOTE: Make sure that the headlamp switch and the ignition switch are in the OFF position.
    Remove the parking lamp assembly. Refer to Lamp Assembly-Parking (Explorer) or Lamp Assembly-Parking (Mountaineer).
  1. Remove the headlamp assembly.
    1. Compress the self-locking tabs.
    1. Remove the headlamp assembly.
    1. Disconnect the electrical connector.
Installation
  1. To install, reverse the removal procedure.

changing headlamp, how to..diagram - 2010&c18=modelyear&c20=n75014&c35=wsm%2clamp%20assembly%u2014headlamp%20%28explorer%29%2csxn%2c417-01%2cremoval%20and%20installation&s=1366x768&c=32&j=1.3&v=y&k=y&bw=995&bh=428&ct=lan&hp=n&[aqe] ddll111_29.gif

Posted on Mar 10, 2011

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a 1994 Ford Explorer need to find out where the fuse box is to change out tail light fuse?


There is no fuse for the tail lights , Do the headlamps work ? Power for the tail lights comes from the headlamp switch ! Find yourself a wiring diagram an check the circuit ! You can find a wiring diagram here http://bbbind.com/free_tsb.html .Do you own a test light or a volt meter ? Do you know how to read a wiring diagram ? There are alot of videos on youtube on trouble shooting automotive electrical circuits , under standing wiring diagrams etc... Did they just stop working ? Do the stop an turn lamps work ?

Aug 18, 2016 | Ford Explorer Cars & Trucks

2 Answers

2000 chevy cavalier. Where is the headlight relay?


in the fuse box.
its marked there did you even look first.?

Jul 15, 2015 | Cars & Trucks

1 Answer

I need the fuse box diagram for a 2008 ford focus.


Click on this link to have a look at the fuse diagrams here: http://www.fordservicecontent.com/Ford_Content/catalog/owner_guides/08focog3e.pdf
Visit support.ford.com at any time to get owner's manuals on most Ford vehicles...
Fuse #7, a 10A fuse, is for the left low beam headlamp.
Fuse #8, a 10A fuse, is for the right low beam headlamp.
Fuse #23, a 15A fuse, is for the high beam headlamp.

Sep 21, 2014 | 2008 Ford Focus

1 Answer

Blowing fuse


You may need a wiring diagram / shop manual to be able to trace the short in the circuit. Could be in the dimmer switch or other places.

Jan 27, 2014 | 2002 Mercury Mountaineer

1 Answer

Need to change the headlight. Does the grill need to come off?


{: ) No need to remove the grille. You just have to get past the two retainers that's holding the headlamp
in place. See sample diagram below. Note the bottle-shaped slot at the middle of each retainer. The upper slot is narrow and this is where the headlamp mounting grooves lock. To ease out removal, carefully push on the face of the headlamp while pulling (or prying) out the retainers upwards. When the headlamp mounting grooves coincide with the round slot of the retainer (you can feel it), you can gently pull the headlamp assembly outwards, and start working on those bulbs. Goodluck.


wyet_helps_32.gif

Aug 31, 2011 | 2003 Chevrolet TrailBlazer

1 Answer

How do change low beam lightbulb on a 2007 dodge ram 1500


Removal & Installation-Get at it from behind the lens assembly.
These instructions show how to remove and replace the whole light assembly but shows a diagram
on what it looks like.

To Remove:
  1. Before servicing the vehicle, refer to the precautions at the beginning of this section.
  2. Remove or disconnect the following: dod_ram15_02-04_headlmp.gif

    • Negative battery cable
    • Push pins
    • Bolts connecting headlamp unit to fender
    • Bulb sockets from headlamp unit
    • Headlamp unit
To Install:
  1. Install or connect the following:
    • Bulb sockets
    • Headlamp unit to fender with the bolts
    • Seal and push pins
    • Negative battery cable
prev.gif next.gif

Jan 14, 2011 | 2007 Dodge Ram 1500 Quad Cab Sport

1 Answer

Left hand main head light not working. replacing light bulb did not help.


If you have headlamps failing and bulbs do not do the trick, the headlamp switch is your culprit and should be changed very very soon. Let me know if you need anything else. I have diagrams.

Aug 22, 2010 | 1998 Audi A4

3 Answers

Change low beam


Headlamp Removal & Installation Bulb Replacement To Remove:
CAUTION
Halogen bulbs contain pressurized gas. Mishandling a bulb may result in the bulb shattering into flying glass fragments.
CAUTION
Make sure to wear eye protection when handling a halogen bulb.
CAUTION
Do not touch the glass of a halogen bulb, only handle the bulb by the base.
CAUTION
Do not allow a halogen bulb to come into contact with dirt or moisture.
CAUTION
Make sure to dispose of a used halogen bulb properly.
CAUTION
Do not allow children to handle halogen bulbs.
  1. Turn the lamp switch to the off position.
  2. Make sure the bulb is cool before changing.
  3. Remove the headlamp assembly from the headlamp panel.
  4. Remove the rear access cover from the headlamp assembly.
  5. Disconnect the headlamp connector.
  6. Remove the bulb from the headlamp assembly by rotating the bulb and socket counterclockwise.
To Install:
  1. Connect the headlamp connector.
  2. Install the bulb into the headlamp assembly by rotating the bulb and socket clockwise.
  3. Install the rear access cover onto the headlamp assembly.
  4. Install the headlamp assembly into the headlamp panel.

Jul 16, 2009 | 2004 Chevrolet TrailBlazer

1 Answer

I need to replace my 1997 chevy suburban headlight assembly


REMOVE OR DISCONNECT
  1. Retaining ring screws from the retaining ring.
  2. Retaining ring from the headlamp.
  3. Headlamp from the headlamp mounting bracket.
  4. Electrical connector from the headlamp.
INSTALL OR CONNECT
  1. Electrical connector to the headlamp.
  2. Headlamp to the headlamp mounting bracket.
  3. Retaining ring to the headlamp.
  4. Retaining ring screws to the retaining ring

Mar 24, 2009 | Chevrolet Suburban 1500 Cars & Trucks

Not finding what you are looking for?
1999 Ford Explorer Logo

248 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

74896 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

fordexpert

Level 3 Expert

5467 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...