Question about 2005 Peugeot 405

2 Answers

Peugeot sterio code

I'm trying to find out the code for my peugeot blupuntk sterio. it says error 4 on the screen. make of the car is a diesal 206lxd. reg. v473 pkk. can anyone help?

Posted by on

  • Moscow80 Aug 21, 2008

    Hi



    I had my battery replace yesterday and now i need a code for my stereo the problem is that it isn't the stereo that i got with the car and they haven't got any records of my upgrading it? I think it's awful that i should have to pay any money to get this "code". Do you know of any way to help me please?



    Thannks in advance

  • Anonymous Apr 10, 2009

    error 4

×

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I had the same problem with my peugeot 51 plate, and the peugeot dealership said they didnt hold the codes this far back, If you havent had the car from new the previous owners may have written the code in the manual for the car. I did try various websites trying to get my code but none of them worked and in the end had to pay £5 to get it re-programmed.

Posted on Feb 18, 2009

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 14 Answers

You need to ring the Peugeot Dealers, as I had that problem with my Nissan radio on my Nissan. The dealers were able to immediately provide me with the right code to input and radio has worked no problem since. When I disconnect battery I always need to re-input the same code.
If your Blaupunkt wasn't Manufacturer fitted, then whoever of your previous owners who fitted the stereo would have the code, or have you tried Blaupunkt themselves, don't know if they keep codes?

Posted on Aug 03, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

PRND error (gearbox faulty)


run the fault codes and check for a faulty Transmission control module.

Dec 15, 2013 | 2005 Peugeot 405

1 Answer

I have a Peugeot 207 56 plate my sterio is an rd4. when I put a cd in it starts ti read yhen just comes out. it keps saying introscan inactive.could anyone please help.mick


Not too sure here, but try cleaning the cd. May be scratched or dirty and the stereo can not read it . Other than that, sounds like a stereo issue.

Oct 21, 2013 | 2006 Peugeot 207 1.4

1 Answer

Peugot 1.9 diesal i need timeing marks


_19.png_20.png_21.png
Hope this helps, you will require locking pins, you can buy these as a kit, or depending on your knowledge you can improvise using bolts.
Steve G.

Feb 06, 2011 | 2005 Peugeot 405

1 Answer

I am looking for wiring diagram for wiring up my tow bar on my peugeot 207sw car year of car is 2009 1.6 diesal I have bought a relay.


if you fit the towbar yourself,you can kiss goodbye to your warranty.....peugeot are very strict on this.(assuming you are in Europe.)for USA,things may be different.anyway the wiring loom makers should put a diagram in with the wires....

Oct 15, 2010 | Peugeot 405 Cars & Trucks

1 Answer

Where can i download handbook for peugeot 106 1.4 diesal keywest


where can i download peugeot 106 diesel 1994 handbook

Jan 30, 2010 | 1989 Peugeot 405

2 Answers

Peugeot 206 radio Error 2, what does this mean?


i don't know what error 2 is. It might mean that you tried too many attempts to enter the code, causing the radio to 'lock up'. When this happens, some radios 'auto clear' the error code after a fixed period of time (anywhere from 3 hours to a couple of days). Others can't be cleared without sending the radio back to the manufacture (but try simply disconnecting the battery, and reconnecting it, first) 
Assuming that you can get back to the position where you can enter the code, here's how to do it. I'll use the code 4968 for my example: 
Press button 1, 4 times 
Press button 2, 9 times 
Press button 3, 6 times 
Press button 4, 8 times 
Press button 6.

try leaving your ignition on for an hour or so and see if the error 2 message changes to the option where you have to input a code.

check you peugeot manuals to see if the previous owner has noted the code down if not hopefully you should have a stereo manual whihc will have the serial number on it .if not then you will have to remove the stereo and get the serial number off the back.
if you take the serial and logbook to a peugeot dealers they will beable to give you a code usually free.

let us know how you get on and please rate 

May 06, 2009 | 2005 Peugeot 405

Not finding what you are looking for?
Cars & Trucks Logo

588 people viewed this question

Ask a Question

Usually answered in minutes!

Top Peugeot Experts

Colin Stickland
Colin Stickland

Level 3 Expert

21936 Answers

Wahs Team

Level 2 Expert

205 Answers

yadayada
yadayada

Level 3 Expert

60667 Answers

Are you a Peugeot Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...