Question about 1998 Pontiac Bonneville

1 Answer

Will the 3800 engine from 1994 bonneville fit a 1998 bonneville

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 166 Answers

Yes it will fit you wll have to swap the crank sensor from yours to the new one

Posted on Dec 29, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get to try the service completely Free afterwhich it costs $6 per call and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a 2002 Pontiac Bonneville 3.8 LIV6.. Will a 3800 pontiac motor work for me?? Does it need to be same year as my car??


The motor will fit physically . The Best question is will the computer / PCM recognize and plug in to all connection points . This is why same year is important . Verify at a Auto Parts counter that 3800 series is in same time eg ; 1999 - 2003 all engine parts are same . This will tell you engine swap / versus computer will be OK. If you have PCM from 3800 motor then install it too . pcm talking to pcm is very important ..good luck .

Jan 01, 2015 | 2002 Pontiac Bonneville

1 Answer

Need a picture of control module for 1998 pontiac bonneville se 3800


There are several control modules.
This is the engine control module.
1f65850d-40fa-4253-a2c4-9ae56c00ddd8.jpg
This is the ignition control module.
7276a048-a703-487c-a3e2-14ff95ca16a8.jpg
Hope this helps.

Jan 02, 2014 | 1998 Pontiac Bonneville

1 Answer

1994 bonneville 3800 engine. I had work done, replaced water pump, and now I have a noise that sounds like a screw or a stone bang around on metal. I took off the serpentine belt and ran the engine for a...


If you had no noise prior to replacing the water pump then the noise will be at the water pump. Remove the belt and turn the water pump by hand and you should feel the noise. I suspect fan bolts too long or water pump bolts not fitted in the proper holes and hitting on the pulley. If the problem can be felt in the shaft of the water pump I would take it back to whoever fitted it and have them re do the job as it may be that the impellor is hitting on the inside of the engine housing water jacket.

Aug 25, 2013 | 1994 Pontiac Bonneville

2 Answers

I have a 1998 pontiac bonneville se , engine 3800 (no turbo) the car idels smooth,but when you mash down on it , the car starts mising and than levels out , it also miss if you kick it the passing gea


I seriously doubt it.
The O2 sensors measure the amount of unburned fuel in the exhaust and would not be affected by water if you got them wet.
The spark plug wires and coils would be affected.

Feb 08, 2013 | 1998 Pontiac Bonneville

2 Answers

Beit routing for a 1994 pontiac bonneville with a 3800 v6 engine


ledsled378_168.jpg

..............................................................................................................................................

Sep 11, 2011 | Pontiac Bonneville Cars & Trucks

1 Answer

What is the firing order of a 1998 pontiac bonneville 3800?


I look up firing orders at:
http://autorepair.about.com/od/fol/FOL.htm

I assume you don't have the super charger, then this should be the firing order:
1998 Pontiac Bonneville
3.8 liter V-6 VIN "K"
zeevert_58.jpg

Apr 04, 2011 | Pontiac Bonneville Cars & Trucks

2 Answers

What engines will fit a 1998 grand prix


You will only be able to fit a 3800 engine in this car. If you would really want to swap a different motor a 3800 superchanged L67 engine will fit but you will need a heavy duty tranny from the 3800 motor and you will also need a wireharness injectors and harness and also a PCM. You can find these motors for a pretty cheap price on moradparts from ebay. They also have their own website. Very very good place to buy used W body GM parts

Apr 02, 2010 | 1998 Pontiac Grand Prix

1 Answer

Where is the pcv valve located on a 1998 pontiac


if it a 3800 its on pass side on the intake under map sensor by alt.

Mar 07, 2010 | 2001 Pontiac Bonneville

1 Answer

1994 Buick Regal. Can't figure out where the orifice tube is! 3800 actually a Gran Sport


The orifice tube is located in the liquid line from the condenser to the evaporator at the fitting on inside left front fender.c95498c.gif

Jun 21, 2009 | 1995 Pontiac Bonneville

Not finding what you are looking for?
1998 Pontiac Bonneville Logo

Related Topics:

98 people viewed this question

Ask a Question

Usually answered in minutes!

Top Pontiac Experts

yadayada
yadayada

Level 3 Expert

76630 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8499 Answers

Are you a Pontiac Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...