Question about 2002 Mazda 626

Open Question

Where are the locations to jack up a 2002 mazda 626 es? Front tires and rear tire points?

Posted by on

Ad

5 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017

Ad
  • 1 Answer

SOURCE: Jack Location for Tire Change

under the back seats, jack is under the driver's side backseat, tire iron & rods are under passenger's side backseat.

Posted on Aug 24, 2008

Ad
Brian032472
  • 150 Answers

SOURCE: 2002 E320. Premature tire wear on right rear wheel.

THese cars have a high speed rated tire and will almost always wear quickly. The right rear is the drive wheel (where the power goes when you give it gas) It will wear real quickly if you drive it hard. I would try rotating every 7500 miles (unless tire sizes are different as with the SL series) I sell a lot of tires on these cars and 25K is usually the limit.

Posted on Feb 01, 2009

  • 23 Answers

SOURCE: clunking popping noise from rear end when tires

the gears in your rear end are probably chipped and broke or need shims

Posted on Oct 26, 2009

SOURCE: Mazda 626 2000 - warning lights for ABS, TCS

what u do to stop the vehicle and remove the battery head and refix,if the problem still persits go for thorough scanning.

Posted on Mar 25, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a 1996 Mazda 626 and have been told I need to replace the tie rods or I will have to replace my tires about every 6 months. When I went on line to try and order the tie rods there were several...


Jack the front of the car up high enough to get under it, put jack stands under the car for safety.

Start on either side and check the tie rod ends for looseness. If you have someone to help, have them hold one tire with hands at 3 and 9 o'clock while you grab the other tire the same way. Try to move the tire by pushing and pulling. If you feel movement, have your helper sit in the car and move the steering wheel 1/4 to 1/2 turn left and righ as you check the tie rods for which one or ones are loose.

Once you have found out which to replace, after they are replaced, you will need to have the car aligned.

Replacing tires every six months is not the worst--Sooner or later a sloppy tie rod let's go. They don't always go out all at once, but sooner or later they all need replaced.

Apr 12, 2011 | 1996 Mazda 626

1 Answer

Where are the lift points for 2002 gmc envoy?


The lift points for a fllor jack are under the lower control arms in the front.The lift point in the rear are under the shock mounts on the axle.If you are using a hoist then the lifts points are the four corners on the lower part of the frame between the front doors and tires and rear doors and tires.I hope I could help, Rate me acordingly.Thanks...

Oct 11, 2010 | 2002 GMC Envoy

1 Answer

Jack placement on a 2002 chrysler 300m to fix a flat tire


Typically on Chrysler the lift point for the front tires is located just behind the wheel and for the rear just in front of the wheel. When you remove the cover that is over the spare tire there should be a diagram showing these. The User Manual will also designate these. These all assume you are using the original issued jack.

Jul 11, 2010 | 2002 Chrysler 300M

2 Answers

I need to know the exact PSI Pressures for the tires on a mazda 626 model 1995


open your drivers side door. you should see a sticker there with the information you need. sometimes they put the sticker in the glove compartment

Dec 18, 2009 | 1995 Mazda 626

2 Answers

Car started to shake while driving


Jack front end. Use both hands to check driver and passenger side tires for slight wobble. If wobbles, you have a bad ball joint. Otherwise inspect tie-rod end for wear.

Oct 21, 2009 | 2000 Mazda 626

1 Answer

How to remove front tire


Hi Joker
First loosen up bolts that hold the tire on. Then you need to jack the car up using the jack from car or other type jack. Once the tire is off the ground you can remove the bolts and take off tire.

Hope this helps

Matt

Sep 18, 2009 | 1997 Mazda 626

1 Answer

What is the factory tire size for a Mazda 626


Mazda equips your vehicle with more than one possible size during production.
Please select the size installed on your vehicle from the choices below

tire size one:
tire size two:
185/70-14
195/65-14

Aug 17, 2009 | 1992 Mazda 626

1 Answer

I need the factory wiring radio color codes to a mazda 626 99 es so i can hook up my new alpine deck


Hi

The wiring color codes for 1999 Mazda 626 are--

Constant 12V+ Blue/Red
Switched 12V+ Blue/White
Ground n/a
Illumination Red/Black
Dimmer n/a
Front Speakers 6" x 8" Doors
Left Front (+) Green/Orange
Left Front (-) Green/Black
Right Front (+) Green
Right Front (-) Yellow/Green
Rear Speakers 6" x 9" Rear Deck
Left Rear (+) Blue/Green
Left Rear (-) Blue
Right Rear (+) Blue/Black
Right Rear (-) Blue/Orange
Please do rate the solution & revert for further assistance.

Thanks
Rylee

Jul 31, 2009 | 1999 Mazda 626

1 Answer

Jack position to change rear tire 98 pontiac grand prix


factory jack to be placed in front of tire inbetween notches on seem. A manual floor jack can be used placing it under center connection bracket for rear wheels. Be shure to block front tires when using floor jack and have car in gear if a manual or park if automatic transmision.

Mar 31, 2009 | 2002 Pontiac Grand Prix

Not finding what you are looking for?
2002 Mazda 626 Logo

Related Topics:

314 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mazda Experts

yadayada
yadayada

Level 3 Expert

78267 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8836 Answers

Are you a Mazda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...