Question about 2006 Chrysler 300

1 Answer

What does it mean if my 2006 chrysler 300 makes a loud blowing noise? Im late on my oil change is that why? If it is the reason when i change the oil will it still be loud?

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Brigadier General:

    An expert that has over 10,000 points.

  • Master
  • 3,911 Answers

A loud blowing noise is not caused by failing to timely get an oil change, if the oil is gone you will get a loud metal on metal sound followed by a clunk of the engine freezing up. The oil pressure light would have been on solid for a while first. If it sounds like a vacuum cleaner, could be a plugged catalytic converter, if not could be a power steering pump low on fluid. I think you are hearing a fan which does not kick off by itself. On a car that new something has failed. I would get the warranty papers out of the glovebox, examine them and take this to a dealer ASAP.

Posted on Dec 29, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

06 chrysler 300 oil pressure light goes off and on im concerned its my engine


Test the sender first. It could just be a poor electrical connection on the sender or the sender itself. Check oil level too. If you have a lot of miles on the engine it's possible the oil pump is worn.

Dec 17, 2016 | 2006 Chrysler 300

1 Answer

My tire was making a loud noise now my Chrysler 300 will not go into reverse and is very hard to steer and move


coud be several things brake caliper siezed up or bearing bad ,or transmission issues hard to turn cant be the powersteering ,check the belt ,check fluids,jack up the wheel see if it spins freely if not check the caliper

Oct 30, 2014 | Cars & Trucks

1 Answer

Have a 2006 chrysler 300, 3.5 with loud ticking noise during acceleration, also experiencing loss of power. Replaced both rocker assemblies and performance improved but ticking is still there.


sounds like bad valve seats or seals do you have a oil pressure gauge on your dash.check the pressure.then check your return ports on top of the head thats giving you the problem see if the oil is returning to the oil pan.sometimes the return ports become blocked and the oil stays on top of the head.and see if the oil supply is making up to the head.hope this helps.mark

Feb 19, 2014 | 2006 Chrysler 300

1 Answer

Loud noise from power steering pump


if its a screeching sound it the universal link on the steering column, they make this sound when they dry looks similur to this
31185_m-lkwhkfwj330knc5ai5uhyzz2-3-0.jpg when it wears out it make strange sounds.

Jul 15, 2017 | 2006 Chrysler Pacifica

1 Answer

How to remove the oil pressure sensor for a 2006 chrysler 300


how to change oil sensor on a chrylser 300 2006

Jun 09, 2012 | 2006 Chrysler 300

2 Answers

I have a 2006 Chrysler 300 with around 55,000 miles. It is making a loud knocking noise as of late.


had same issue with mine, sounded like someone banging on the engine with a hammer. whole car started shaking.. stuck lifter.. had to replace entire lifter bank

Jun 02, 2011 | 2006 Chrysler 300

1 Answer

Well my car will still crank and run but there a loud noise comiing from the motor this guy say it could be my flywheel im not sure what it is i was a few days late changing my oil could dat be my problem


I do beleive its the flywheel it does not take very much for the teeth of the flywheel to break making a terrible noise oil in no possible way could make your enging make a noise unless never changed since vehicle is brand new after oil gets weak its just dirty and looses the power of cleaning your pistons of carbon and other deposits

Apr 14, 2011 | Ford Crown Victoria Cars & Trucks

1 Answer

My manual says to use 5w-20. I have a 2006 chrysler 300 v6 2.7. Which brand is best and would using a synthetic be better or worse?


any brand of oil is ok but you have to do the oil change every 3k miles or under
this motor will go bad if you don't do the oil change
synthetic will be better and cost more but you still have to do the oil change every 3k


go only and search chrysler or dodge 2.7 engines

Nov 19, 2010 | 2006 Chrysler 300

1 Answer

Engine knocking, valve ticking loud in engine, when idle or drivi


Make sure the oil level is good, and have the oil pressure check by a garage or someone who can, by using a external gauge to see what the actual oil press is. Low oil pressure will give you the ticking, start there.

Aug 05, 2009 | 2006 Chrysler 300

1 Answer

Loud tapping noise under hood of my 06 chrysler 300c


CHECK THE OIL LEVEL, IT MAY BE LOW AND WHAT YOU HEARS IS A VALVE TAPPING.

Dec 10, 2008 | 2007 Chrysler 300c AWD Sedan New Cars

Not finding what you are looking for?
2006 Chrysler 300 Logo

263 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chrysler Experts

yadayada
yadayada

Level 3 Expert

75066 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7754 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...