Question about 2006 Toyota Land Cruiser

2 Answers

Changed oil and filter on my 2006 Toyota Land Cruiser and now car is sluggish. When I check oil level is too high. Engine light is on. What is going on?

Posted by on

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Genius:

    An expert who has answered 1,000 questions.

  • Toyota Master
  • 2,430 Answers

Too much oil has been added ,drain out oil to full mark on dip stick, if oil light is still on remove oil sender unit, and fit pressure gauge , should be at least 15 psi at idle, if pressure is ok replace oil pressure switch, if no pressure look for fault at oil pump, stuck relief valve or broken spring.

Posted on Sep 21, 2015

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 166 Answers

To much oil will ruine a engine you will need to drain it till it is at the full level

Posted on Dec 29, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have toyota hilux 2006 d4d change engine oil lightes on how to resit


mmuha is right in his solution of June 27 2009. The ODO must be reading either trip a or trip b, not the total mileage, (otherwise you sit there for ages waiting for the dashes to appear).

Turn key off.
Turn

Jan 09, 2013 | 2006 Toyota Land Cruiser

1 Answer

Engine knocking


engine knocking sound like worn engine bearings or low oil level. if oil level okay more likely oil pump has failed or engine bearings worn out or engine oil diluted with antifreeze or gasoline causing viscosity oil to be too thin.if oil and filter been changed.if you see check engine light flashing code scan for faulty knock sensor. if you see low oil light flashing engine knocking damaged to engine done.

Oct 13, 2012 | 2006 Chrysler PT Cruiser

1 Answer

Oil filter location on 2010 Toyota Landcruiser Ute Diesel V8 turbo


I want to change the engine oil in my 200 series cruiser how do I get to the sump plug & filter.

Dec 06, 2010 | 2010 Toyota Land Cruiser

2 Answers

Just had a new cylinder head fitted to my 1997 toyota land cruiser , now its over heating what could be the problem .


It sounds like the head gasket is leaking and needs to be replaced. Keep in mind that the antifreeze is corrosive to the bearing to the engine so try to replace the gasket and engine oil soon as possible. Keep an eye on the oil level and condition, check to make sure that there is no antifreeze mixing with the engine oil. If your lucky, it could just be a bad thermostat and less work to replace the thermostat. Good luck

Nov 30, 2009 | 1995 Toyota Land Cruiser

4 Answers

What kind of oil should I use on my 1989 toyota land cruiser


DEPENDS ENTIRLY ON WHETHER IT IS PETROL OR DIESEL
FOR THE DIESEL MOTOR 15W/40HD DIESELOIL CC-CD
FOR NORMAL TO HIGH TEMP CLIMATES---SLIGHTLY LIGHTER IN COLD CONDITIONS
PETROL ENGINES ANY HIGH QUALITY MULTIGRADE OIL IS CONDIDERED SATISFACTORY BY TOYOTA

Oct 10, 2009 | 1989 Toyota Land Cruiser

1 Answer

What do the dash lights on a toyota landcruiser


I don't have one of those vehicles but in the Path Finder it meant Low oil pressure or low oil. If your oil level is correct get the oil pump checked out before the engine is damaged.

Aug 27, 2009 | 1997 Toyota Land Cruiser

2 Answers

What kind of oil for toyota land cruiser 2008


best u use mobil one synthetic motor oil

Jan 19, 2009 | 2008 Toyota Land Cruiser

3 Answers

Quantity of engine oil used in 1 HD engine toyota land cruiser


The Landcruiser 1HD engine uses 9.3 liters of oil with the filter. The oil is replaced every 5000Kms.

Nov 12, 2008 | 1994 Toyota Land Cruiser

1 Answer

Engine oil problem


Whoa! Never remove the oil filter while the motor is running. Alot of vehicles have valve cover leakage and it is easily repaired with a new valve cover gasket. It is completely normal for the dipstick to be dry until the motor is off and all oil has drained from the upper compartments of the engine including the area where the oil lubricates the valve guides. Most mechanics will place the vehicle on a completely level area and then wait 15 minutes or so after the motor is off to check the oil. The dipstick will always show that you have low oil if you check it while the motor is running as the oil is elsewhere doing it's job. If you replace your valve cover gasket be sure to not overtighten and tighten in a random crisscross pattern so that you have uniform pressure all along the gasket. There are torque guides for this and you can usually get them from your local parts house. Buy a good torque wrench also.

Nov 07, 2008 | 1995 Toyota Land Cruiser

Not finding what you are looking for?
2006 Toyota Land Cruiser Logo

274 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

75005 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7710 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...