Question about 2006 Saturn Vue

Open Question

The overhead light on driver side is broke, when tapping on light to turn on had used to much force and if the light is fixable.

Posted by on

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

The overhead light between the driver and passenger won't come on where do I find power for this light


Your instrument cluster light dimmer switch if turned to max, will click on the roof light..Some cars also have overhead light disable sw near light control panel. Also door sw around door where it closes

May 15, 2017 | Cars & Trucks

1 Answer

2001 Chevy tracker 2.5 24 port double overhead cams


Remove valve cover , start and run on low idle, adjust loud tappit. First turn in (clockwise) tap will get lowder then turn back til tapping stops.

May 07, 2017 | Cars & Trucks

1 Answer

I have a 2008 Hyundai Entourage. The airbag light is on and the power doors/tailgate will not work from the door controls. Power doors will work from the keyless remote and the driver's side overhead...


Read the link below,,, a lady had her airbag light on and found a relatively easy fix. Still required a dealer reset, but you want the airbags to work!!

Often times, certain codes will disable certain features. Some are for safety reasons, others are for a nuisance reason to force you to get the car fixed. Good luck!

Air Bag Light On Hyundai Forum Hyundai Enthusiast Forums

Jun 23, 2014 | 2007 Hyundai Entourage Limited Minivan

1 Answer

The lights inside the car, the panel, overhead light and radio, don't work. Could that be a fuse and if yes, where is the fuse box so that I can change it.


make sure the dome light is not turned off by the switch headlight of switch at the dome light.the fuse panel should be under the driver`s side to the left of the steering colume and use a test light to test the fuses.

Jun 29, 2011 | 1998 Mercury Mystique

1 Answer

HAVE A 2000 FORD FOCUS THAT HAS BEEN SETTING FOR 1 YR. THE WOMAN THINKS THE TIMING BELT IS BROKE--SAID SHE WENT IN STORE CAME BACK OUT AND THE MOTOR WOULD NOT TURN OVER. MY QUESTION IS DO YOU HAVE TO...


This problem is fixable without having to buy a new motor. Though it is a timely and costly repair, because a proper mechanic will make sure that nothing is bent in the valve-train. It can run anywhere from $500 , including parts and labor, if just the belt. To who knows what if something is bent in the valve-train.

Apr 05, 2011 | Ford Focus Cars & Trucks

1 Answer

Replace freeze plug


Use a screw driver and hammer to tap one side of the old freeze plug in. This will turn it side ways in the hole. Use a pair of channel locks to grab it and pull it out. Use some Permatex Ultra Copper silicone around the edge of the new plug. Use just enough to put a light coat on it. Put the new plug up to the hole and take your hammer and lightly tap all the way around the plug evenly until it is flush with the block.

Feb 05, 2011 | GMC Sonoma Cars & Trucks

1 Answer

I can't turn off the inside overhead light on the driver's side. Where is the switch for this on a 2009 Equinox?


You probably push on the light lens to turn it on and off. In other words just reach up and push in on the light it self.

Jan 04, 2010 | 2005 Chevrolet Equinox

1 Answer

Drivers side visor broke is it fixable


there is an adhesive you can buy to stick it back onto the windshield. Autozone, pepboys, ect. have it.

May 31, 2009 | 1998 Chevrolet Malibu

1 Answer

How does one replace interior overhead lights?


the plastic lens that you press to turn the light off and on can be remove with a pick or small screwdriver pry from the outer edge of it and it will pop off. the light will come out with the socket by twisting.

Jan 09, 2009 | 2005 Chrysler Town & Country

2 Answers

Cannot remove tail light assembly


I had the HARDEST time with the lights...I never realized changing a bulb would be so difficult. Once you unscrew what you need to, go into the trunk and pull the lining away from the back part of the light. There are the white prongs that you will need to tap with a hammer until they pop out and then the light assembly will come out. Be careful though, I got a little too impatient and broke mine. I used a binding agent to hold it back in place though...GOOD LUCK!

Oct 18, 2008 | 2004 Chevrolet Aveo

Not finding what you are looking for?
2006 Saturn Vue Logo

Related Topics:

45 people viewed this question

Ask a Question

Usually answered in minutes!

Top Saturn Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8557 Answers

Are you a Saturn Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...