Question about Toyota Land Cruiser

Open Question

Diagram of suspension arm - Land Cruiser Toyota Cars & Trucks

Posted by on

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Looking for a 66 lincoln suspension diagram


I owned a 1966 Lincoln Continental for years, and there is really nothing unique about the standard suspension (front A-Arm & ball joint, rear coil spring with swingarms). All parts are typical of suspensions of full-size vehicles in that era.
Is yours an early air-ride system? If so, there are many Lincoln forums that can help you diagnose and repair the system.
Best of luck to you!

Sep 05, 2014 | Cars & Trucks

1 Answer

Peugeot 306 suspension diagram


Top mount diagram
11_25_2012_11_16_32_am.jpgBottom Arm / Wishbone Diagram11_25_2012_11_18_32_am.jpg

Nov 19, 2012 | Cars & Trucks

1 Answer

1996 olds cutlass supreme needs sway bar & other suspension work . i dont know what other part is called. i need to see diagram


if you are replacing the swaybar it is likely that you may need to change the sway bar links as well. Other suspension parts include control arms, control arm bushings, struts, strut mounts...

Sep 27, 2012 | Cars & Trucks

1 Answer

1991 primera how to replace upper suspension arms


It is pretty straightforward.

Raise and support the vehicle. Remove the tire and wheel assemblies. Remove the bolts from both ends of the upper suspension arm. Remove the suspension arm. Reverse procedure to install.

You may have to pry the thing with a pry bar to get the outer end of the suspension arm separated from the steering knuckle/strut lower end.

Mar 06, 2012 | Nissan 200SX Cars & Trucks

1 Answer

What does the control arm on the front left driver side supposed to look like fully assembled


Hello! First diagram is the lower...Second is the upper..Guru...saailer

LOWER IDENTIFICATION:




Item
Part Number Description 1
5495 Stabilizer Bar Link Bolt and Bushing Assembly 2
18A192 Nut, Washer and Bushing Assembly 3
808264 Bolt 4
5005 Frame 5
5B326 Torsion Bar (LH) 6
5B327 Torsion Bar (RH) 7
620481 Nut 8
5C491 Nut and Washer 9
3079 Front Suspension Lower Arm (LH) 10
3078 Front Suspension Lower Arm (RH) 11
3A130 Tie Rod End 12
808166 Nut 13
808167 Nut 14
5K483 Front Stabilizer Bar Link 15
5482 Front Stabilizer Bar 16
5484 Front Stabilizer Bar Bushing 17
3B353 Front Stabilizer Retainer 18
N807396-S100 Bolt A
- Tighten to 40-55 Nm
(30-40 Lb-Ft) B
- Tighten to 150-200 Nm (111-148 Lb-Ft) C
- Tighten to 21-29 Nm
(15-21 Lb-Ft)


UPPER IDENTIFICATION:
Item Part Number Description 1 3C156 Damper Assembly (RH) 2 805348 Nut and Washer 3 - Shock Absorber Insulator
(Part of 18198) 4 3C157 Damper Assembly (LH) 5 3020 Front Suspension Bumper 6 3083 Front Suspension Upper Arm Assembly A - Tighten to 34-47 Nm
(25-35 Lb-Ft)



LOWER DIAGRAM FOLLOWED BY UPPER:

2_12_2012_9_47_51_pm.gif2_12_2012_9_54_26_pm.gif

Feb 12, 2012 | 1996 Ford Explorer

1 Answer

I need to get a diagram of the front suspension to fix a control arm that broke. Is there any way that you can help me get a copy of the front suspension of this car?


Im sorry I do not have such a diagram. But i would recommend just looking at the other side of the car. Most of the components on each side are the same, just reversed.

Good Luck and thanks for using FixYa!!

Mar 26, 2010 | 1990 Buick Riviera

1 Answer

I'm looking for a front suspension diagram for a 1997 Ford Ranger 4wd. Can you point me in the right direction?


Suspension The independent front suspension (IFS) system is composed of a two-piece front driving axle, two front coil springs (5310) and two radius arms. The front driving axle consists of two independent axle arms. One end of each axle arm is anchored to the frame (5005). The other end of each axle arm is supported by the front coil springs and radius arm.

Front Suspension
f8852f9.gif

Mar 15, 2010 | 1997 Ford Ranger SuperCab

1 Answer

Need a diagram bad....!!!


The front suspension is a combination strut and spring design. The control arms (11) pivot from the crossmember (12). On base models conventional rubber bushings are used for the lower control arm pivots. On up-level suspensions the front bushing is replaced by a cross axis bearing.

Oct 02, 2009 | 1999 Pontiac Grand Am GT

1 Answer

Can't get old lower control arm off 1994 geo metro. stuck at ball joint.


remove ball stud bolts .then remove suspension arm bracket nut .remove suspension arm bracket bolts. remove rear bracket and suspension arm. torque ball stud nut 44 ft lbs torque suspension arm rear bolts 32 ft lbs.

May 05, 2009 | 1994 Geo Metro

1 Answer

Aveo lower control arm


jack up both sides and remove both wheels and look at the good 1. if this helps please rate

Nov 21, 2008 | 2006 Chevrolet Aveo

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

35 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

75117 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7772 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...