Question about 2001 Pontiac Grand Am SE

1 Answer

I changed a burnt fuse, and the whole ignition is out. What is the problem? First there appeared the word Security the the system id dead.

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    New Friend:

    An expert that has 1 follower.

  • Expert
  • 136 Answers

Well alarm must shut of the car. Try unlocking all with remote or manually Remove the fuse install see if it runs. Check for other fuses. Remove battery power until reset ECM and restart the process. Was heater/fan/battery under large consumption. Did you quickly try to start the engine.

Posted on Dec 29, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Replaced sterring colum now it wont start


S (Nissan Vehicle Immobilizer System-NATS) has the following immobilizer functions:  Since only NVIS (NATS) ignition keys, whose ID nos. have been registered into the ECM and IMMU of NVIS (NATS), allow the engine to run, operation of a stolen vehicle without a NVIS (NATS) registered key is prevented by NVIS (NATS). That is to say, NVIS (NATS) will immobilize the engine if someone tries to start it without the registered key of NVIS (NATS).  All of the originally supplied ignition key IDs have been NVIS (NATS) registered. If requested by the vehicle owner, a maximum of five key IDs can be registered into the NVIS (NATS) components.  The security indicator lamp blinks when the ignition switch is in "OFF" or "ACC" position. Therefore, NVIS (NATS) warns outsiders that the vehicle is equipped with the system.  When NVIS (NATS) detects trouble, the security indicator lamp lights up while ignition key is in the "ON" position.  NVIS (NATS) trouble diagnoses, system initialization and additional registration for other NVIS (NATS) ignition key IDs must be carried out using CONSULT-II hardware and CONSULT-II NVIS (NATS) software. Regarding the procedures for NVIS (NATS) initialization and NVIS (NATS) ignition key ID registration, refer to CONSULT-II OPERATION MANUAL IVIS/NVIS.  When servicing a malfunction of the NVIS (indicated by lighting up of Security Indicator Lamp) or registering another NVIS ignition key ID no., it is necessary to re-register original key identification. Therefore, be sure to receive ALL KEYS from vehicle owner. System Composition NIEL0174 The immobilizer function of the NVIS (NATS) consists of the following:  NVIS (NATS) ignition key  NVIS (NATS) immobilizer control unit (IMMU) located in the ignition key cylinder  ECM  Security indicator lamp.

ANTI-THEFT SYSTEM ! Did you change KEY'S

Feb 07, 2017 | 2001 Nissan Sentra

6 Answers

Wont start has no power to dash no power period wont crank over


Remove and clean the battery cables (wear goggles) and if that doesn't yield any results have the batter tested by a local parts store, it is free. If you need a battery don't go cheap, get the OEM GM/Delco battery. they last for years

Feb 02, 2015 | 1999 Isuzu Rodeo

1 Answer

The push button not working the light on button goes out someimes yellow key light is on red security light is on but car dosent do any thing i have checked battery in car and smart key steering will not...


security problem or fuse burnt or the remote battery is dead try putting the key remote close to the ignition button when starting and see what happens

May 26, 2014 | 2009 Nissan Cube

2 Answers

How does the original security system work?


If the Obd says No Link you have a power issue.

Dec 02, 2013 | GMC Sierra 3500 Cars & Trucks

1 Answer

I have a 1999 lumina that wouldnt start. Ive replaced the battery, the altanator, the starter had my key checked for the code at the dealer. After I replaced the battery, the car cranked up great the first...


There are 3 main parts of the Antitheft security system that can fail and cause the SECURITY light to come on. Just because the key is good, doesnt mean that the ignition/lock cyclinder and TDM (Theft Deterrent Module) computer are good also. The problem might be farther down the line. At the high cost of these parts, id suggest just bypassing the whole entire system. These things are known to fail and average failing twice during the life of your car. Go to this link for info ways to fix this yourself for cheaper.

http://vatspasslockpasskeysecurityhelp.yolasite.com/

Aug 05, 2011 | Chevrolet Chevy Cars & Trucks

1 Answer

1993 Chevy s10 Blazer. Headlights, dash lights, and motor stalled while driving. Wouldn't restart. Replaced light switch and fuel pump. It will start with starting fluid but shuts off when burnt off....


sounds like a bad, burnt wire, or a blown fusible link. It runs on starter fluid or gas put in the air system, but the fuel pump, (electric) is not working. These types of problems can be hell to track down. Fusible links can appear good, but be bad. At any rate, its not any of the fuses inside the vehicle, it's either one under the hood in that box or a fusible link or bad wire somewhere under the hood. Basically your whole electrical system is out, so I would check main leads. Does the battery stay up even tho it's just setting? If it stays up, is not a dead short. Good luck, fixing it will be easy, but finding it a real pain.

Oct 30, 2017 | 1993 Chevrolet S-10 Blazer

3 Answers

Right signals not workin and some fuses are not workin even when chage


while the fuses not working is normal for most of the cars system, it appears the multi-switch is broken. ther fuses will be fine, and most likely have nothing ot do with the turn signal problem.

Mar 10, 2011 | Mazda 929 Cars & Trucks

2 Answers

2006 Chevy Trailblazer without warning completely goes dead


Sounds like a dead battery, loose or dirty battery cable connections.

Aug 21, 2009 | 2006 Chevrolet Trailblazer

1 Answer

Ignition Switch Car Start Problem


Check all underhood fuses. Maxi-fuses.If a maxi-fuse has burnt then the circut it protects should be checked thoroughly

Jul 19, 2009 | 2006 Chrysler Sebring

2 Answers

1997 Jeep Grand Cherokee fuse layout


you may have to pull each one until you find the one thats burnt.there may be more than one fuse burnt so id replace any that are bad

Jan 21, 2009 | 1997 Jeep Grand Cherokee

Not finding what you are looking for?
2001 Pontiac Grand Am SE Logo

37 people viewed this question

Ask a Question

Usually answered in minutes!

Top Pontiac Experts

yadayada
yadayada

Level 3 Expert

79865 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8836 Answers

Are you a Pontiac Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...