Question about 2002 Pontiac Aztek

1 Answer

Tracey feul pump dosn,twork turned off won,t start

Posted by Anonymous on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Pontiac Master
  • 2,019 Answers

The electric fuel pump is controlled by a relay in the fusebox.
It normally only goes on for a few seconds, and then if the alternator does not signal the engine is running, the relay is supposed to shut the pump off. But you can shunt the secondary wires of the relay to keep it on if you want to check fuel pressure.

Try some starting fluid spray to make sure the ignition is good.
It will at least sputter on the spray, if there is spark.

Here is a picture of an Aztek fuel pump relay:

http://cgi.ebay.com/ebaymotors/Standard-Motor-Products-RY484-Fuel-Pump-Relay-_W0QQcmdZViewItemQQfitsZMakeQ3aPontiacQ7cModelQ3aAztekQQhashZitem45f786818dQQitemZ300505530765QQptZMotorsQ5fCarQ5fTruckQ5fPartsQ5fAccessories

Posted on Dec 29, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Ingnitionfuse and relay checked its ok.fuelis not coming to injectors during crank .pls give a proper solution


the feul filter get a book and look were its located but it wouldnt be the ignition fuse it would be feul pump fuse when u turn the key in on position not starting the car youll hear the feul pump at the back of car kick on if u dont hear it replace the feul pump if it dose then its ur coils

May 17, 2013 | Cars & Trucks

2 Answers

Feul pump


Sounds like vapor lock. Leave the cap from the gas lid undone for a little while.

May 05, 2013 | Cars & Trucks

1 Answer

I have a 92 Toyota 4runner that I replaced the feul pump injectors and feul line it has spark and feul to the plenum if I squirt feul in the tbody it will start but won't stay running I also have power...


Tough one,Check all the fuses in the underhood box?
Fuse links are there also,pink and green plastic .Best
to check 'em with an ohmmeter just to be sure.Plue if
you remove them to check you can look for corrosion
at the terminals.
If the throttle pos. sensor is at wide open throttle the
injector pulse will be disabled. Could be the tps,
Hate to think the ECM is at fault,(like 250.00) but it
could also be the problem.

Mar 16, 2013 | Cars & Trucks

1 Answer

Cranks but wont start


Someone will need to check the circuit at the pump to see if it is getting power from the relay. If it is the pump should be running when you first turn the key on.
You can also check for power at the pump relay.

Dec 13, 2012 | 2000 Ford Windstar

1 Answer

I have a 1993 ford ranger standard cab 4x4 w/a small 6.turns over but won't start


sounds like no feul. turn your key to the on position but not start see if you hear the feul pump priming you can check if there is pressure in the feul lines through the schrader valve on the feaul rail it looks kind of like a valve stem. be careful if there is pressure in the system it will spray out so protect your eyes if not useing the proper tool. if no pressure probably your feul pump

Nov 18, 2011 | Cars & Trucks

1 Answer

Changed feul pump feul filter changed computer. Van still shutdow


this could be a number of problems,check the voltage with a volt meter,not a test light at the fuel pump connection. make sure you have 12V,if so unhook the fuel supply line,turn key to ON not START, and make sure the pump will continue to flow,( obviously cqatch the fuel with a pail,or put a hose on it to pump it into a pail,don't let it leak all over the place.)if the pump continues to flow with out shutting off,your pump,filter,and electrical for your pump is ok.it could be a restriction in the return line,or the regulator may not be functioning.un hook the return line as close to engine as possible,install hose on it and route to a pail to catch fuel,with supply line hooked back up,start van and see if it works,if it keepd shutting off,you've now eliminated return line problems.check the regulator.

Oct 07, 2009 | 1996 Dodge Caravan

1 Answer

!996 Isuzu rodeo some times starts


When you have no spark only it could be the ignition module. when you have no gas delivery only it could be a relay. However when both are missing. It is either your crankshaft sensor or the engine computer. Good luck. also see if the injectors are pulsing.

Dec 28, 2008 | 1996 Isuzu Rodeo

2 Answers

1990 jeep cherokee turns off


check your fuel pump relay switch. under hood

Sep 09, 2008 | 1990 Jeep Cherokee Limited

Not finding what you are looking for?
2002 Pontiac Aztek Logo

336 people viewed this question

Ask a Question

Usually answered in minutes!

Top Pontiac Experts

yadayada
yadayada

Level 3 Expert

75744 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8123 Answers

Are you a Pontiac Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...