Question about Ford Escape
TO DISENGAGE SENSOR IS IT UNDER DASH , CRASH SENSOR IS BEHIND FRONT BUMPER
Posted on Dec 29, 2010
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
If it's not idling and has problems starting, it's probably the IAC motor. It's located on the throttle body. Follow the airfilter box all the way to the engine, where the rubber flex hose attaches. The throttle body should be the first aluminum part you come to. Attached to the side you'll find small little aluminum part with a small wire harness attached. Unplug it, take the IAC motor off and clean inside with carb cleaner. This should fix the problem with the idle.
Posted on Sep 11, 2009
B1 means the sensor is located on the same bank of the engine that has the #1 cylinder. B2 is located on the opposite bank.
S1 means the sensor is located BEFORE the catalytic converter
S2 means the sensor is located AFTER the catalytic converter
You didn't say which engine you have, so I've included the diagrams of both 4 cyl and 6 cyl so you can see the banks
Posted on Oct 20, 2009
this may sound crazy but this is what they say (manufactor) when ever airbags are deployed ,the following must be replaced,the deployed bags. the airbag module,crash sensors,clock spring, the belt buckles and seat belts should be inspected and checked.
Posted on Mar 08, 2010
The Crankshaft Position Sensor (CKP):
4 CYL - located on the front of the engine, near the flywheel end of the block. remove exhaust manifold, disconnect electrical connector, remove bolt. installation is reverse of removal, no gasket req'd. torque to 62 inch-pounds
6 CYL - located next to crankshaft pulley - remove right wheel, remove lower right splashshield. disconnect electrical connector, remove bolt. installation is reverse of removal, no gasket req'd. torque to 89 inch-pounds
Posted on Dec 22, 2010
Tips for a great answer:
Aug 26, 2014 | Cars & Trucks
Oct 28, 2017 | 2003 Ford Escape
Jun 21, 2017 | Cars & Trucks
Jun 09, 2011 | 2002 Ford Escape
Jan 31, 2011 | 2002 Ford Escape
Apr 15, 2010 | 2002 Ford Escape
Mar 08, 2010 | 2001 Ford F150 Styleside SuperCrew
May 02, 2009 | Ford Escape Cars & Trucks
Aug 14, 2008 | 2002 Ford Escape
370 people viewed this question
Usually answered in minutes!