Question about Ford Explorer

Open Question

I have a 1993 Ford explorer and it's front winsheild wipers don't work they come on and if you manually move them they work otherwise it hums,I want to know how to remove the motor off of the vehicle and replace it,seeing how there is no acsess panel where the wiper arms are at!! i know of the motor assembly 3 bolts and there is 2 assembly panels on the firewall,is this how i get to it??? Please help me.

Posted by on

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What type of fuse is used for a 2007 Eddie Bauer Ford Explorer rear windshield wipers and where is it placed?


Your owners manual will give you fuse location and identification for the rear wiper. Most likely a wiper motor problem though. Turn on rear wiper and grab rear wiper arm and see if it will move at all. If it does move a bit or starts working....the motor is the problem

May 01, 2015 | 2007 Ford Explorer Eddie Bauer

3 Answers

1999 ford explorer rear wiper don't work


hi there
this is pretty typicalof rear wipers check fuse first to make sure it is good if that doesnt work it is probably the motor which goes out and you can pick one up at your local auto parts store hope this will help you and have a great day

Aug 21, 2011 | 1999 Ford Explorer

2 Answers

I have a 93 explorer the wipers won.t work except on high i replaced the wiper motor and themultifunction switch still the same problem


I have a 95 explorer ... intermittent wiper and park not working. Hi and low works good. I replaced wiper run/park relay (R3146) Advance Auto Parts. Location underhood power distribution box left side outboard of brake fluid reservoir.

a509311a-feb1-4872-8ea1-574c7a46f61a.jpg


45520467-3945-4afd-b2e7-26319b5e36d4.jpg

Apr 14, 2011 | 1993 Ford Explorer Limited

1 Answer

How to change front wiper motor on 1993 ford explorer


Hi there,
  • Turn the ignition on, and turn the front windshield wipers on. When the wipers are facing straight up on the window, turn the ignition off so they remain in that position.
  • Disconnect the negative battery cable with an adjustable wrench. Remove the passenger side wiper blade assembly, by removing the pivot nut at the bottom with an adjustable wrench. Remove the wiper linkage access cover, and use a screwdriver to remove the wiper motor clip. Remove the wiper linkage from the wiper motor.
  • Disconnect the electrical connector on the wiper motor. Remove the bolts and nuts, securing the wiper motor with a socket wrench. Remove the wiper motor from the vehicle. Install the new wiper motor, and tighten mounting bolts and nuts with a socket wrench. Connect the electrical harness to the new wiper motor. Connect the wiper linkage, and insert the linkage clip. Install the wiper blade assembly, and tighten the nut with an adjustable wrench.
  • Connect the negative battery cable securely, using an adjustable wrench.
Hope this helps...

Jan 24, 2011 | 1993 Ford Explorer Limited

1 Answer

Where is fuse for 97 ford explorer windshield wipers


Here is a link to your owner's manual from Ford.
The fuse diagrams begin on page 146. There are 4 affecting wipers
Fuse 12 = Front & Rear washer and wiper
Fuse 16 = Wiper run relay
Relay #1 - Wiper run relay
Relay #3 Hi/Lo Wiper relay

http://www.motorcraftservice.com/pubs/content/~WOVEXP/~MUS~LEN/41/97expog1e.pdf

Apr 11, 2010 | 1997 Ford Explorer AWD

1 Answer

The rear wiper is not working


I work for Ford and these wiper motors are famous for this problem, replace the wiper motor.

May 01, 2009 | Ford Explorer Sport Cars & Trucks

1 Answer

Wiper motor quit working


does the motor not run? check the operation rods connected to the arms and the motor, see if they are bent

Apr 07, 2009 | 1993 Ford Explorer Limited

2 Answers

Display on radio and back wiper and lighter


The would be the most comun ploblem. Lock for the fuse box. When you find it there shoud be a diagam that tell you where the fuse is located, if not you can upll out the fuses one at a time untill yuo find the burn one. make sure to get the fuses in the same spot and all the way in.

Jan 16, 2009 | 1999 Ford Explorer

2 Answers

1993 ford explorer - toublshooting fuse/electical problem


I believe the fuse for your starter is in the power distribution box, 93 explorer 4.0L 4X4. find diagram for this in Chilton Ford Ranger/Explorer/Mountaineer 1991-1999 Repair Manual 26688 page 6-43 Fig.88 Be aware that there are (4) figures for the 93 4.0L explorer and each shows a different part of the same engine wiring. See top right 'power distribution box' follow lines to the part of your engine you are concerned with, which fuse number, then look inside your engine, passenger fender, push down on the protective ?wall then pull the cover up, see your diagram and fuse numbers. The diagram for inside fuse box, page 6-31 fig.63 I hope this helps

Jul 05, 2008 | 1993 Ford Explorer Limited

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

114 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

76691 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

fordexpert

Level 3 Expert

5537 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...