Question about 1999 Ford Windstar

Open Question

What is the brakelight bulb number - 1999 Ford Windstar

Posted by on

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Brake lights rear blinkers quit working when turn signal is on flashes really fast


You simply have a burned out bulb or bulbs. With the key turned on turn on the directional for the left side and then the right side. Typically one bulb is blown and the opposite side works normally. Observe the normal side and note which is the flashing bulb. It is the flashing bulb on the other (malfunctioning) side that needs to be replaced. To replace the bulb you must remove the entire brakelight assembly, which isn't difficult. Open the trunk and locate the electrical harness that lines up with the brakelight assembly. Near the harness, locate the two (possibly three) nuts or wingnuts that attach the brakelight assembly to the car. Once the nuts are removed, the assembly can be pulled off the rear of the car. After replacing the bulb, be sure to test the operation of the new bulb before reassembling everthing.

Mar 18, 2015 | 2002 Ford Taurus

1 Answer

Were do i find a brakelight bulb for my panther atv 125cc?


Auto parts stores and others should have that standard sized bulb.

Jun 25, 2012 | Cars & Trucks

2 Answers

I just need the part number for the brakelight bulb for a 2003 trailblazer


The part # for the brake light bulb on this 2003 chevy trailblazer is 3157. this is for the brake light and heres a picture also. have a good dayjohnjohn2_79.jpg

Mar 14, 2011 | 2003 Chevrolet TrailBlazer

1 Answer

Right rear brakelight wont copme on


the bulb will need to be replaced. It would be best if both are about the same age. If bulb is new, then the brake switch is faulty.

Sep 23, 2009 | 2001 Buick Century

1 Answer

Taillights will not work, but turn sig, brakelights work, fuses are all good


Some makes and models have different taillight bulbs and brakelight bulbs. in other words your turn signals and brakelights are on one bulb and the tailights are on another, or they have multiple filaments and one of them could be bad

Aug 01, 2009 | 2002 Dodge Ram 3500 Truck

1 Answer

Brakelight don't work when car running


How you check this phenomenon.
by 2nd person?
Switch or wire harness problem

Apr 17, 2009 | 2002 GMC Envoy

1 Answer

Left brakelight doesn't come on


Test for power at the inoperative bulb socket with a 12V test light

Apr 04, 2009 | 2000 GMC Jimmy

1 Answer

Replaced brakelight switch ,still no brake lights, and tailights


Check to make sure you have the correct bulb in them. Even though the parts store may have had a part number, sometimes they don't get them right. If those are correct check the relays and or the socket itself.

Mar 26, 2009 | 1989 Mercury Grand Marquis

1 Answer

Brake light bulb was changed, now brake light is on


Most likely the incorrect bulb was installed or a faulty bulb, causing an electrical cross over. Replace the bulb, and check socket.

Dec 16, 2008 | 1995 Hyundai Scoupe

Not finding what you are looking for?
1999 Ford Windstar Logo

Related Topics:

22 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

76164 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

fordexpert

Level 3 Expert

5520 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...