Question about 2000 Ford Expedition

1 Answer

The heat dose not seem to be getting as warm as it use to

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 62 Answers

First of all see if temp gauge (after warming up) is getting up to normal temp ,were you have normally seen it, if not I would replace the thermostat next check the heater hoses. are kinda a bear cat to get to but you need to check to see if they are both getting hot and about equal temp one to the other,if the hoses are both getting hot and the temp is getting up to the normal mark,then it is very probably that you have a blend door or blend door motor problem, which are very extremely involved and if you are not a highly skilled tech I would not recommend it . It requires pulling the complete dash out of the vehicle to remove the heater box from under the dash, this is very common problem with this year ford expedition, sorry I don't have better news ,but hopefully your lucky and its only a thermostat problem

Posted on Dec 29, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Weak heat at best


you may have a problem with the heater core flap that allows coolant into the core. seems like there is just not enougg coolant going through the core. check to make sure the heat/cool selector is working properly.

Jan 03, 2014 | 1999 Nissan Quest

1 Answer

Burp cooling system how is this done


When you drain & refill a cooling system air is often traped in places like the heater core. If so the coolant level will appear full before it really is. To burp you need to add coolant till full or just over. Adjust the heater control to MAX heat. This will let full force of water pump to push air out of heater core. Fan speed dose not matter. Next start the motor & let it idle. As it warms up the thermostat will begin to open and close. This is when you should see fluid level drop as trapped air is pushed from system ( add fluid as needed). If this is working right you should fell quite hot air coming from heat vents. If air doesn't seem hot enough adding RPM by pulsing gas pedal should do the trick. And that should do it.

Jul 14, 2013 | 2002 Mazda Protege

1 Answer

2006 Toyota Sequoia, just purchased, however, when I come to a complete stop the vehicle jerks as if someone is pulling me backwards, enough to cause whiplash. More noticeable after driving it awhile,...


1 problem at a time

1st-- squeaks-- when the breaks where replaced where the anti-radile clips put back in, if so dose squeak rear or front

if rear check spring kits

2nd-- jerks-- this could be drive train question dose ur engine seem to rev at all wen this is happening


try this

goto an area where this is safe

driving at normal speeds put the shifter in neutral (this will NOT hurt it if you follow wat i say)
now apply the brakes dose it **** if so problem is in breaks is not get ur trans looked at
''''''''''DO NOT PUT BACK IN GGEAR UNTILL U HAVE CAME TO A COMPLEAT STOP'''''''
good luck

Aug 16, 2011 | Toyota Sequoia Cars & Trucks

1 Answer

My subaru was fine and now the heat dose not work and it over heats fast but the engine dose not seem hot at all?


probably a closed thermostat, and it should be replaced asap or you will overheat the engine and damage it badly.

Jan 24, 2011 | 1998 Subaru Legacy

1 Answer

I recentally installed a brand new raidaitor in my 1995 honda passport 3.2 L 4 wheel drive ,and also replaced the theromstat with the recomended 170 degree one and now my windshild defroster dose not work...


no wonder w/a 170 it take all day put a 195 or 190 . 170 is fine for summer but winter got to have a little higher one not going to hurt nything just get warm faster & better

Dec 26, 2010 | 1995 Honda Passport

1 Answer

My 2002 Nissan Altima's heater will not heat it will blow cold air and if you run it for an hour or so it will work what wrong with it


its most likley to be the engine thermostat you could need a new one fitted dose the engine get fully hot or dose that take a long time to warm up as well even when your driving it,, if it dose its that themostat

Oct 26, 2009 | 2002 Nissan Altima

1 Answer

Vent's won't open-up or should i say can't get the car to give heat up. the car is a 1998 Dodge Caravan.


What temp dose it run at when on open road .
Have you checked the coolant and dose it feel rather warm after a run.
If yes to Question 2 then get and fit new thermostat ,,but make sure its fitted the correctly way around ( the spring looking bit towards the engine.)
OTHERWISE it could be the vacuum valve on the heater or on the heater pipes not opening up so as to let the hot water to pass through.

Oct 14, 2009 | 1998 Dodge Caravan

1 Answer

The problem is with the heater.


3 words come to Mind. Heater Blend Door

Mar 17, 2009 | 1999 Ford F150 Regular Cab

Not finding what you are looking for?
2000 Ford Expedition Logo

90 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

77169 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22265 Answers

fordexpert

Level 3 Expert

5572 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...