Question about 1995 Ford F250

2 Answers

I HAVE A 95 F250 AND THE BRAKE PEDAL GOES TO THE FLOOR. I HAVE REPLACED THE MASTER CYLINDER TWICE AFTER BENCH BLEEDING, REPLACED THE BRAKE BOOSTER AND THE ABS VALVE. BLED THE SYSTEM 3 TIMES AND THE BRAKE PEDAL STILL GOES TO FLOOR.

Posted by on

Ad

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 3,113 Answers

Check all the calipers and wheel cylinders

Posted on Dec 29, 2010

Ad
  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 145 Answers

The slave cylinder is the next thing I'd replace.

Posted on Dec 29, 2010

Ad

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 45 Answers

SOURCE: I HAVE A 95 F250

You need to check wheel cylinders, the only way that the brake peddle will go to the floor like that is if there is a lose of fluid pressure somewhere .

Posted on Dec 29, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a 87gl wagon, when pressing on the brake pedal it goes to the floor recently replaced master cylinder and front calipers with pads and bleed the system, the engine sputters also when driving...


Master cylinder must be bench bled before it is installed or it will not build pressure possible you have a bad booster try bleeding the master cylinder first

Mar 14, 2013 | Cars & Trucks

2 Answers

I install reman booster new master cylinder and the pedal goes to the floor what can i do


You probably need to start over...1st by bench bleeding the master cylinder...(you can do this on your truck...review the bleeding instructions...after completing this you need to be sure the master cylinder is full of brake fluid...you will need a helper...but your next step will be to bleed each wheel brake caliper or cylinder. Start with the right rear, next left rear, then right front to drivers side front...(farthest away to start) you may have a brake fluid leak...if not, your pedal pressure should continually raise...Hope this helps.

Nov 16, 2011 | 1992 Ford F250

1 Answer

I HAVE A 95 F250 AND THE BRAKE PEDAL GOES TO THE FLOOR. I HAVE REPLACED THE MASTER CYLINDER TWICE AFTER BENCH BLEEDING, REPLACED THE BRAKE BOOSTER . BLED THE SYSTEM 3 TIMES AND THE BRAKE PEDAL STILL GOES...


You need to check wheel cylinders, the only way that the brake peddle will go to the floor like that is if there is a lose of fluid pressure somewhere .

Dec 29, 2010 | Ford F-250 Cars & Trucks

1 Answer

95 ford f250 powerstroke brake pedal will go down by itself and or stick once its pressed changed and bench bled master cylinder twice changed power booster (maybe got a bad booster?) or could the vacuum...


You must inspect ALL Brake lines, flexible and steel, and each corner brake. Look for fluid leaks. If everything below is okay, replace the M/C. I suspect damaged cup or bore. do not rebuild, get a new one. Unlikely too much vacuum.

Sep 06, 2010 | 1995 Ford F250

1 Answer

My brake pedal goes to the foor after replacing the master cylinder and booster twice and bleeding the system. what is going on?


its possible to get two bad master cylinders,booster is ok,if it was bad it would be hard to push the pedal down,all it does is assist,bench bleed the M C before you put it on the car,then start bleeding wheel cylinders starting at the farthest away from MC

Jan 25, 2010 | 1991 Plymouth Sundance

3 Answers

No brakes push pedal to floor


leaky rear break cylinder or master cylinder

Oct 02, 2009 | 2001 Chevrolet Blazer

3 Answers

Just replaced master cylinder on 1990 aerostar and bled the brakes, still the pedal goes to floor and i have no brakes


Did you bench bleed the master cyl. before installing it? then when you installed the new master, did you bleed all 4 points? If yes, then check all for points for leaking caliper/s and leaking wheel cylinder/s. If the van has ABS, check the valve body for a bleeder screw and see if air bleeds out of it. If you've checked everything twice and did everything right then your new master cyl. may be defective.

Apr 29, 2009 | 1986 Ford F 250

Not finding what you are looking for?
1995 Ford F250 Logo

885 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

76164 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

fordexpert

Level 3 Expert

5522 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...