Question about 2004 Chevrolet TrailBlazer

Open Question

I have no sound from my boss radio i checked the radio & fuses and they are good

Posted by on

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

The Audio system on my 2005 Solara Convertible just died. I checked and replaced the 25 amp fuse (the old one still looked good), but still no power. What else should be checked?


dead as in all functions and modes dead, all.
?
well it can only be 2 things
1: no 12vdc to head, (use a 10 buck voltmeter from walfart>?)
2: head end is dead.

25amps is the wrong, fuse. even 10 amps is good for 140watts.
the fuse is stated in the operators guide lost that?
some cars its mark,, RADIO.
the fuse that looks bad is
the fuse that looks good,can be , in fact. bad. what most techs
do is use ,yes, the voltmeter again, to measure bothsides of fues
keyon, radio on, to check all fuses related to radio (audio)
12v on both sides wins
if 12v makes it to the Radio and amp (if external amp then that too must have power, for sure) then the radio is bad, or amp.
if the radio scans and finds stations(not stated) then the amp might
be bad or lost power.

radio 101, over and out.




Jan 01, 2015 | 2005 Toyota Camry Solara

1 Answer

Radio not working


sounds to me like the radio lost its pass word code.
(or a power amp fuse is blown)
check fuses. , this time. more carefully.
some radios go to now amp mode, will tune but are in pass word mode.
if you drain the battery , this happens everytime.
oldest story in the world this.....

http://www.jeepforum.com/forum/f96/obtaining-anti-theft-radio-code-1350588/

if all power pins on the radio have 12vdc and if radio has external amp
there are like 4 or 5 radio options on new jeeps.
so if it has an external amp,it too has power pins, if they have 12vdc
then the fuse is not blown. (the fsm shows the wiring and fuses, read the FSM)
if the radio is still dead, it can be the radio code issue.
if the fuses are good , its Jeep dealer time.

Mar 31, 2014 | 2011 Jeep Grand Cherokee

1 Answer

Radio sound low and squeeky, works good in summertime


The volume control on your radio is called a potentiometer, which may be going bad. It works better when its warm because materials expand as they warm up and make tighter contact with each other.

It is also a possible a bad wiring connection exists. Poor contact will cause static, poor audio quality and intermittent output.

Your radio will have plug type connector(s) Your speakers will most likely each have two wires with single female spade connectors of different widths (keeps the polarity correct) the wire with the stripe (of whatever color) will be connected to the negative (-) speaker terminal.

So you need to check all the connections, one is making poor contact.
If both speakers (assuming you have two) sound good or bad... then start with the plug connectors for the radio and any independent black ground wire coming out of the radio.

If one speakers sounds okay check the connections on the other one. You check the connections by carefully pulling the speaker wire off of the speaker and then carefully pushing it back on making sure it feels tight and secure.

PS: If you pull the fuse for the radio, the radio will have no power and will not work. The radio coming on proves the fuse is good.

PSS: Your owners manual should provide lots of information on your sound system components.

Aug 11, 2017 | 2000 Chevrolet Silverado

2 Answers

Radio not working


radio doesn't work. she got out of the car, the quit she got back in and the radio was dead. fuse 56 a 20 amp fuse is good, 6 a 5 amp fuse is good. 20 is a 10 amp fuse is dead with the fuse is good. could the door switch has somthing to do with it.

Jan 04, 2014 | 1986 GMC S-15

1 Answer

Infinity modulus problems with car radio for 2005 Chrysler Crossfire. No sound


If the radio works the two fuses for it must be OK. 15A fuse 23 is the source of amplifier power. The amplifier is probably tucked away near the radio

Oct 10, 2012 | Cars & Trucks

1 Answer

2007 gmc acadia speakers don't work


1st check fuse for Amplifier.

2nd if fuse is good, most likely the Amp has died. Common for GMC

Jun 02, 2012 | 2007 GMC Acadia SLE

3 Answers

Volume in 2003 yukon denali quit working on radio,


check your manuals guide book on reprogramming the radio and where would you find the fuse for the radio first check the fuse then reprogram if this information has been helpful please let us know good kuck

Jul 28, 2009 | 2006 GMC Sierra Denali

1 Answer

1995 accent radio


you sure you have speaker

Sep 21, 2008 | Hyundai Motor 1995 Accent

Not finding what you are looking for?
2004 Chevrolet TrailBlazer Logo

Related Topics:

51 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

79186 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6927 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...