Question about 2000 Ford Expedition

1 Answer

Truck not starting, not firing up but it is turning over...new battery, new starter, checked fuel pump...????

Posted by on

  • John Jon Dec 29, 2010

    How did you check the fuel pump

×

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Ford Master
  • 8,273 Answers

Please see my tip at http://www.fixya.com/cars/r5821173-doesnt_car_start_gasoline_engines . These are generic instructions. If you get stuck or need specific instructions for your car, please get back to me with model, year and engine info.

Posted on Dec 29, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a 1990 ford ranger truck that just want start battery has fire new cilon but no power. Starter is fine I'm a female and I just don't know what else it could be I've ask and nothing help.


well this is your first request with fixya ----battery has a charge is it turning over and not starting --or not turning over --if turning over try spraying the carb with starter fluid if starts fuel problem --fuel pump --inertia switch --relay-fuel filter --////if no start electrical---//distributor--battery ignition -coil etc the following link shows how to check the inertia switch
How to Check Inertia Switch on Ford Vehicle Fuel Systems and this is link is a free online repair manual which can assist you with repairs
Free Online Auto Repair Manuals and Free Auto Repair Diagrams

Oct 11, 2016 | 1990 Ford Ranger SuperCab

1 Answer

New battery, new starter relay, checked starter its good. now what??


If the car is turning over and not starting or is it dead at the key nothing!! If it turns over but not starting check for spark at the plugs at least one if there is none check fuel pump sometimes if there's no spark the fuel pump will not pump its a safety thing so the engine won't fill /flood with gas other thing is timing chain / belt but I think if its a intripid 3.3 its a chain hard fix most places will say junk it because of the high labour cost but it can be done by yourself if done one same thing no fire timing chain broke

Nov 02, 2015 | 2003 Dodge Grand Caravan

1 Answer

What turns on fuel pump and injection . I have power new pump new computer will fire on starting fluid


Hi Bill:
- If it fires on starter fluid you have spark.
- The fuel pump is turned on when you turn on the key. Check for fuel pressure.
- The injectors are triggered by the cps.
I'd suggest that you have codes checked as next step.

Oct 19, 2015 | Cars & Trucks

1 Answer

98 chevy blazer won't start new fuel pump, new starter, battery good. will not turn over. ignition switch changed. its not getting fire to the starter.


Have you checked the purple wire directly at the starter for power when the key is turned to start? Is the vehicle equipped with any type of remote start or alarm system?

May 20, 2015 | 1998 Chevrolet Blazer

2 Answers

Feul problem


Lots of things could cause a no-start, Hendrik. Is your "Check Engine" light on? If so, please have someone get the OBD error codes from the car's computer.

Does it crank but not fire?

If it doesn't crank, check the battery condition, battery connections, ground connections to frame and engine block, starter solenoid, starter motor.

If it cranks, doublecheck your fuel pump installation. Make sure the new fuel pump is properly connected and properly electrically grounded. Look for a fuel pump fuse. Check for proper fuel pressure at the fuel rail, check the fuel flow rate. Check for spark, check or replace spark plugs, distributor cap, rotor, plug wires. Check valve timing, replace timing belt or chain if necessary. Check compression.

Aug 03, 2014 | 2001 Kia Sportage

3 Answers

1999 surburban won't start getting gas and fire. put new coil and check fuel pressure from fuel pump. what can it be,


my 1999 chevy suburban will start with starter fluid bbut wont stay running already replaced coil,rotor on distribitor,and oil pump cant seem to figure it out any ideas

Jan 17, 2011 | 1999 GMC Suburban

3 Answers

It wont turn over battery OK what could be wrong? starter or fuel pump


If it will turn over, and not start, you are missing either fuel or spark...Those need to be checked. (No fuel doesn't automatically mean bad fuel pump, as injectors need to "fire" the fuel.)
If it won't turn over, or clicks, and your battery is good, it might be the starter motor.

Aug 19, 2010 | 2000 Dodge Durango

1 Answer

'99 silverado will turn over but won't start. I have a new battery, 6 month old starter, new plugs, new distributor cap and rotary button. I used to be able to turn the ignition on and off real quick and...


I'd start with one of these and move on to the next.

Fuel
Spark.

Is it getting fuel? You should have an "in tank" electric fuel pump. When you turn the key halfway (just before turning the engine/starter over), you should hear the fuel pump prime. Easy way to check is to look in the throttle body while someone turns the key to the "on" position. You should see/smell the fuel. You can also listen to the gas tank while the key gets turned. You should hear the fuel pump run.

To check spark, pull a spark plug out, put it back on the plug wire and rest the electrode end of the plug up against the engine or exhaust manifold and have someone turn the engine over. You should see the spark plug firing. Don't hold the plug or wire while doing this. You'll get zapped if it's working ok.

If these both check out ok, then take a look at your firing order. If it's off by a significant amount, it may not fire. I've seen this happen when a cap/rotor/wires were changed and the wire/rotor was not positioned on the correct cylinder. (Most of the time they will at least fire or backfire, but either not stay running or run REALLY badly if the firing order is off.

Jan 18, 2010 | 1999 Chevrolet Silverado 1500

2 Answers

New battery turning over and still not starting


1st thing could be the starter, or the spark plugs isnt fireing, and possible fuel pump

Oct 21, 2008 | 1999 Mercury Cougar

2 Answers

02 yukon denali xl wont start, i replaced battery, alternaor and starter are both good truck still wont start


Did you try to replace the starter cable? is the Truck turning over or just clicking.? If it's turning over and not starting. Best guess would be one of two things. Knock sensors Located under intake manifold. they get wet and deteriorate or the fuel pump. I've replaced all three on mine. 233k still running strong...

Aug 15, 2008 | 2002 GMC Yukon XL

Not finding what you are looking for?
2000 Ford Expedition Logo

Related Topics:

25 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

76164 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

fordexpert

Level 3 Expert

5520 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...