Question about 1989 Toyota Pickup SR5

Open Question

I have a 1989 fuel injected Toyota pickup and just had the fuel filter and fuel pump replaced about 6 months ago after being stored for about 4 years. The truck just quit today while driving more than 2000 miles after the above mechanic work. I checked and I have spark to the plugs so I am assuming it is not getting fuel. Do you think this is the fuel pump or filter again? I don't have a manual.... can you tell me where the fuel pump & filter are located? Thanks.... Tom G

Posted by on


6 Suggested Answers

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

  • 72 Answers

SOURCE: gas problem 1989 toyota pickup

check fuse and relay for fuel pump

Posted on Apr 16, 2009

  • 125 Answers

SOURCE: 2000 Toyota 4 Runner, 3.4L, 6 Cylinder. Engine

look at the plug wires they are known to bust when old near the boot

Posted on Apr 30, 2009

  • 15 Answers

SOURCE: Hard to start

check the pressure output on fuel pump if possible.

Posted on Jul 13, 2009

  • 2004 Answers

SOURCE: My 1989 toyota Pickup feels like it stutters from

If I were you, I would rather go in for a diagnosis (scan) if my car is OBD I compliant.

But you could take a look at the fuel pump or see that the fuel system generally is okay.

Good luck.

Rate this.

Posted on Aug 10, 2009

  • 2030 Answers

SOURCE: 1989 22re valve torque specifications

Those valves should be basically self adjusting by way of the hydraulic lifters

Posted on Sep 03, 2009

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Toyota problems fuel pump leaking

Replace rubber lines to injection fuel pump.

Jun 16, 2014 | 1986 Toyota Hilux 2200

1 Answer

22re ruff idle and die

It sounds like you have already spent more money than it would cost to have the problem properly diagnosed.

It sounds like you are describing the symptoms of a faulty airflow meter.

However, 1989 Toyota Pickup used both carbureted and fuel injected engines. Both engines were used with regular automatic transmission, electronic automatic transmission and manual transmission. The engine control diagrams are different for each of these possible configurations.
The place I would start would be to gather any computer fault codes FIRST before wasting any more money randomly replacing parts.

Apr 09, 2012 | Toyota Pickup Cars & Trucks

3 Answers

I have a 1985 toyota pickup (fuel injected)with a 22re engine, it will run on starting fluid, when i spray it but it wont run otherwise, just put in a new fuel pump, thanks for youre help,

Alright, i have a 1987 Toyota 4x4. it has a 22RE full injected was able to run, but it was running rich, and idling pretty eratic..and then only starts up..and dies. after like 5seconds. 

Jun 15, 2010 | 1985 Toyota Pickup

1 Answer

My 1989 toyota Pickup feels like it stutters from speeds 45-65 randomly... Check engine light pops on for a second then turns off. It has a 22RE engine in it and is fuel injected.

If I were you, I would rather go in for a diagnosis (scan) if my car is OBD I compliant.

But you could take a look at the fuel pump or see that the fuel system generally is okay.

Good luck.

Rate this.

Aug 10, 2009 | 1989 Toyota Pickup SR5

2 Answers

Hard to start

Fuel pump is a possible cause but I would check the ignition timing first.

Jun 30, 2009 | 1986 Toyota Pickup 4WD

5 Answers

Dodge cummins won't start, fuel reaching injector pump but no fuel coming out of injector pump.

You said you have fuel flowing from the inlet line of the injection pump? But not at the injector lines?

May 05, 2009 | 1999 Dodge Ram

2 Answers

Loss of power

Do you know how check if every cilinder is working? with the engine in idle, go to the distribuitor cap and carefully unplug one at the time, every cilinder spark plug wire,in the cilinder you dont see a diference in rpm variation, that cilinder is not working, replace spark plug, if you see spark jumping fron the distribuitor cap torch the spark plug wire, another cause to a cilinder fail could be a loss of compression in one or more cilinder

Oct 29, 2008 | 1994 Toyota Pickup

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

48 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts


Level 3 Expert

76164 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8273 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides