Question about 2002 Oldsmobile Aurora
Yes. A new Window Regulator is a bout $60.00. (eBay)
You will need to remove the door panel. There are three bolts holding the Regulator in (10mm) and two more holding the window glass to the regulator. It's a little tricky getting the regulator out and back in.
You will need to position the window and regulator about 2/3 up so you can get to the screws.
Posted on Dec 31, 2010
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: power window off track
not very hard / first thing pop of mirror cover inside then look for screw and little plastic pop outs take screw out and the lift up and pout the bottom of the door trim then pull out on the sides then pull up and out pull vapar barrier off and look inside the door disconect the wiring before the plastic ok/ Please rate my response thank you very much
Posted on Feb 01, 2009
First thing you need to do is to remove the inner door panel so you can see exactly what has happened inside. To do this, find any visible screws and remove them Usually in arm rest and the handle cover, sometimes some are hidden. The perimeter is snapped into place with small plastic "trees" that most times can be pulled out or pried out with a screwdriver (they also make a tool for this). Once panel is free, push in and up at top to disengage from edge of window lip,
You can get an inexpensive manual like haynes to guide you through this. If you can't find one, your best reference is the opposite side door...Open that one up and you can see what it looks like when it's working. Once youi can see what failed, then you can get what you need to make the repair. Scrapyards are a good inexpensive source for parts but with door components generally they will not take parts from doors that are "clean", as they generally sell those as complete replacements. Be careful working inside doors the metal edges inside are sharp.
PS your post made me laugh...I see that you are a woman, but I doubt if you need fixing...only your Jeep does, and that is fixable!!!
Posted on Jul 31, 2009
On the inside trim, you can remove screws that are by the door handle, arm rest, under door and side of door and then gently pull back on the panel as there will also be retaining clips attached and you don't want to break them. You'll need to lift the door panel upwards in order to get it off the window ledge. Then you'll need to manipulate the panel and disconnect the door handle linkage from the door handle and disconnect the wiring for your controls. Pull back the weather seal and you can readjust the window mechanics.
Posted on Sep 29, 2009
Tips for a great answer:
Jul 27, 2013 | 2004 Honda Accord
Mar 22, 2011 | 2002 Dodge Stratus
Jan 22, 2011 | 2002 Mitsubishi Diamante
Apr 07, 2010 | 2000 Chevrolet Malibu
Dec 31, 2009 | 2003 Pontiac Bonneville
Nov 14, 2009 | 2005 Volkswagen New Beetle
May 17, 2009 | 2000 Oldsmobile Alero
Nov 08, 2008 | 1992 Honda Accord
Jul 27, 2008 | 1994 Mercury Grand Marquis
126 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: